J Oracle Cluster Registry Utility Reference

This appendix describes the syntax of the Oracle Cluster Registry (OCR) configuration utility, OCRCONFIG, and troubleshooting OCR, which includes descriptions and usage information for OCRCHECK and OCRDUMP.

This appendix contains the following topics:

About OCRCONFIG

Use the ocrconfig command to manage OCR. Using this utility you can import, export, add, delete, restore, overwrite, backup, repair, replace, move, upgrade, or downgrade OCR.

Usage Information

  • The OCRCONFIG executable is located in the Grid_home/bin directory

  • The ocrconfig command syntax is as follows:

    ocrconfig -option

Using Utility Help

To display the help output for the OCRCONFIG utility:

ocrconfig -help

Privileges and Security

To use the OCRCONFIG utility you must be logged into the operating system as a user with administrative privileges.

Log Files

The OCRCONFIG utility creates a log file in ORACLE_BASE/diag/crs/host_name/crs .

To change the amount of logging, edit the path in the ORACLE_BASE/crsdata/host_name/crsdiag/ocrconfig.ini file.

OCRCONFIG Command Reference

This section describes the following OCRCONFIG commands:

ocrconfig -add

Adds an OCR location to an Oracle Automatic Storage Management (Oracle ASM) disk group.

Syntax

ocrconfig -add +diskgroup_name

Usage Notes

  • OCR locations that you add must exist, have sufficient permissions, and must be mounted before you can add them.

  • You must run this command as root.

  • The diskgroup_name variable is the name of an Oracle ASM disk group. For example:

    • +newdg: Ensure that the disk group exists and is mounted

      The name of the disk group must be preceded by a plus sign (+).

    See Also:

Example

To add an OCR location to the default location in Oracle ASM, data:
# ocrconfig -add +data

ocrconfig -backuploc

Specify an OCR backup directory location.

Syntax

ocrconfig -backuploc +disk_group_name
ocrconfig -local -backuploc dir_name

Usage Notes

  • You must run this command as root.

  • Use the -local option to specify an OLR backup directory location.

  • For an OCR backup location, the disk_group_name variable must be an Oracle ASM disk group. For example:

    +bkupdg: Ensure that the Oracle ASM disk group exists and is mounted on all nodes

    An Oracle ASM disk group name must be preceded by a plus sign (+).

  • For an OLR backup location, the dir_name variable can be a full directory path name. For example:

    • Grid_home/cdata/cluster3/: Ensure that the location exists

    • d:\cdata\cluster3: Ensure that the location exists

    The default location for generating OLR backups on Linux or UNIX systems is Grid_base/crsdata/host_name/olr/, where host_name is the name of the node on which the OLR resides that you want to back up. The Windows default location for generating OLR backups uses the same path structure.

Examples

To specify an OCR backup location in an Oracle ASM disk group:

# ocrconfig -backuploc +bkupdg

To specify an OLR backup location:

# ocrconfig -local -backuploc full_directory_path

ocrconfig -copy

Copies an OCR backup file from one location to another.

Syntax

ocrconfig -copy source_file_name destination_file_name

Usage Notes

  • You must run this command as root.

  • The source_file_name must be a valid OCR backup file. For example:

    • /oradbocfs/crs/BACKUP00.ocr

    • d:\oracle\BACKUP01.ocr

    • +bkupdg:/aimev1/ocrbackup/day.ocr.260.739756845

    If you specify an Oracle ASM disk group, then ensure that the disk group exists and is mounted.

    Examples of valid destination_file_name values are:

    • /oradbocfs/crs/mybkp01.ocr

    • d:\oracle\mybkp01.ocr

    • +bkupdg:mybkp01

    Oracle ASM disk group names must be preceded by a plus sign (+).

Examples

To copy an OCR backup file from a file system to an Oracle ASM disk group:
# ocrconfig -copy /oradbocfs/crs/BACKUP00.ocr +bkupdg:mybkp01.ocr
To copy an OCR backup file from an Oracle ASM disk group to a file system:
# ocrconfig -copy +bkupdg:/aimev1/ocrbackup/day.ocr.260.739756845 /oradbocfs/crs/mybkp01.ocr
To copy an OCR backup file from one Oracle ASM disk group to another Oracle ASM disk group:
# ocrconfig -copy +bkupdg01:/aimev1/ocrbackup/day.ocr.260.739756845 +bkupdg02:mybkp01.ocr

ocrconfig -delete

Removes an OCR device or file.

Syntax

ocrconfig -delete +diskgroup_name

Usage Notes

  • You must run this command as root.

  • The +diskgroup_name variable is the name of an Oracle ASM disk group. For example: +olddg

    The name of the disk group must be preceded by a plus sign (+).

Example

To remove an OCR location:
# ocrconfig -delete +olddg

ocrconfig -downgrade

Only root scripts use this command to downgrade OCR to an earlier specified version.

Syntax

ocrconfig -downgrade

Usage Notes

This command has no options.

ocrconfig -export

Exports the contents of OCR to a target file.

Syntax

ocrconfig [-local] -export file_name

Usage Notes

  • You must run this command as root.

  • Use the -local option to export the contents of OLR.

  • The file_name variable can be a file name or the name of an Oracle ASM disk group (preceded by a plus sign (+)). For example:

    • /oradbocfs/crs/data.ocr

    • d:\oracle\data.ocr

    • +bkupdg:data.ocr

Example

To export the contents of OCR to a file:
# ocrconfig -export d:\tmp\a

ocrconfig -import

Imports the contents of a target file into which you exported the contents of OCR back into OCR.

Syntax

ocrconfig [-local] -import file_name

Usage Notes

  • You must run this command as root.

  • Use the -local option to import the contents of OLR from a file.

  • The file_name variable can be a file name or the name of an Oracle ASM disk group (preceded by a plus sign (+)). For example:

    • /oradbocfs/crs/data.ocr
    • d:\oracle\data.ocr
    • +bkupdg:/aimev1/ocrbackup/data.ocr.260.739756845
  • You must shut down Oracle Clusterware before running this command.

Example

To import the contents a file back into OCR:
# ocrconfig -import d:\tmp\a

ocrconfig -manualbackup

Backs up OCR on demand to a specific location.

Prerequisites

Determine the location of the on-demand backup using ocrconfig -backuploc.

Syntax

ocrconfig [-local] -manualbackup

Usage Notes

  • You must run this command as root.

  • Use the -local option to perform a manual backup of OLR.

ocrconfig -overwrite

Overwrites an OCR configuration in the OCR metadata with the current OCR configuration information that is found on the node from which you run this command.

Syntax

ocrconfig -overwrite

Usage Notes

You must run this command as root.

ocrconfig -repair

Repairs an OCR configuration on the node from which you run this command.

Use this command to add, delete, or replace an OCR location on a node that may have been stopped while you made changes to the OCR configuration in the cluster. OCR locations that you add must exist, have sufficient permissions, and must be mounted before you can add them.

Prerequisites

  • Oracle High Availability Services must be started to successfully complete the repair.

  • The Cluster Ready Services daemon must be stopped before running ocrconfig -repair.

Syntax

ocrconfig -repair -add +diskgroup_name | -delete +diskgroup_name | -replace
   +current_diskgroup_name -replacement +new_diskgroup_name

Usage Notes

  • You must run this command as root.

  • The +diskgroup_name variable is the name of an Oracle ASM disk group. For example: +newdg/mycluster/OCRFILE/registry.255.842574125

    If you specify an Oracle ASM disk group, then the name of the disk group must be preceded by a plus sign (+).

    To obtain the name of an Oracle ASM disk group, run the ocrcheck -config -details command on a node where the OCR configuration does not need repair.

    See Also:

  • You can only use one option with ocrconfig -repair at a time.

  • Running this command only modifies the local configuration and it and only affects the current node.

Example

To repair an OCR configuration:
# ocrconfig -repair -delete +olddg

ocrconfig -replace

Replaces an OCR location to an Oracle Automatic Storage Management (Oracle ASM) disk group.

Prerequisites

  • OCR locations that you add must exist, have sufficient permissions, and must be mounted before you can add them.

  • You must have at least two OCR devices to use this command. If you do not have at least two OCR devices, then you must run the ocrconfig -add command to add a new OCR device followed by the ocrconfig -delete command to delete the OCR device you want to replace.

Syntax

ocrconfig -replace +current_diskgroup_name -replacement +new_diskgroup_name

Usage Notes

Example

To replace an OCR device or file:
# ocrconfig -replace +olddg -replacement +newdg

ocrconfig -restore

Restores OCR from an automatically created OCR backup file.

Prerequisites

  • Before running this command, ensure that the original OCR or OLR files exist. If the original file does not exist, then you must create an empty file.

    Note:

    You cannot use a file generated by the ocrconfig -export command to restore OCR. The file must be a manual or automatic backup.

  • If OCR is located on an Oracle ASM disk group, then ensure that the disk group exists and is mounted.

Syntax

ocrconfig [-local] -restore file_name

Usage Notes

  • You must run this command as root.

  • If the OCR backup file is located in an Oracle ASM disk group, then ensure that the disk group exists and is mounted.

  • The name of an Oracle ASM disk group must be preceded by a plus sign (+).

  • Use the -local option to restore a backup of OLR.

  • Example file names are:

    • /oradbocfs/crs/BACKUP00.ocr

    • d:\oracle\BACKUP01.ocr

    • +bkupdg:/aimev1/ocrbackup/day.ocr.260.739756845

Example

To restore OCR from a file:
# ocrconfig -restore /oradbocfs/crs/BACKUP00.ocr

ocrconfig -showbackup

Displays all available backups.

Syntax

ocrconfig [-local] -showbackup [auto | manual]

Usage Notes

  • Use the -local option to show manual OLR backup information. The -local flag functions only with the manual option.

  • You can optionally specify auto or manual to display information about only automatic backups or only manual backups, respectively:

    • auto: Displays information about automatic backups that Oracle Clusterware created in the past 4 hours, 8 hours, 12 hours, and in the last day and week.

    • manual: Displays information for, at most, the last five manual backups that you invoke using the ocrconfig -manualbackup command.

Example

This command displays manual backup information for OLR, similar to the following:
$ ocrconfig -local -showbackup manual
cc40524 2020/05/08 15:06:57 /gridbase/crsdata/dglnx6/olr/backup_20200508_150657.olr 0

ocrconfig -showbackuploc

Displays the backup location of the OCR and OLR backup files.

Syntax

ocrconfig [-local] -showbackuploc

Usage Notes

  • You must run this command as root

  • Use the -local option to display the OLR backup location

Example

This command returns output similar to the following:
# ocrconfig -showbackuploc

The Oracle Cluster Registry backup location is [+bkupdg]

# ocrconfig -local -showbackuploc
The Oracle Local Registry backup location is [/gridbase/crsdata/dglnx6/olr]

ocrconfig -upgrade

Upgrades OCR from a previous version.

Syntax

ocrconfig -upgrade

Usage Notes

This command has no options.

Troubleshooting Oracle Cluster Registry and Diagnostic Output

This section describes various methods for troubleshooting problems with OCR, and obtaining diagnostic information from the utilities used to manage OCR. You can use these utilities to troubleshoot OLR.

This section contains the following topics:

Troubleshooting Oracle Cluster Registry

Table J-1 describes common OCR problems with corresponding resolution suggestions.

Table J-1 Common Oracle Cluster Registry Problems and Solutions

Problem Solution

Not currently using OCR mirroring and would like to enable it.

Run the ocrconfig command with the -replace option.

OCR failed and you must replace it. Error messages in Oracle Enterprise Manager or OCR log file.

Run the ocrconfig command with the -replace option.

OCR has a misconfiguration.

Run the ocrconfig command with the -repair option as described.

You are experiencing a severe performance effect from OCR processing or you want to remove OCR for other reasons.

Run the ocrconfig command with the -replace option as described.

OCR has failed and before you can fix it, the node must be rebooted with only one OCR.

Run the ocrconfig with the -repair option to remove the bad OCR location. Oracle Clusterware cannot start if it cannot find all OCRs defined.

Using the OCRCHECK Utility

The OCRCHECK utility displays the version of the OCR's block format, total space available and used space, OCRID, and the OCR locations that you have configured.

OCRCHECK performs a block-by-block checksum operation for all of the blocks in all of the OCRs that you have configured. It also returns an individual status for each file and a result for the overall OCR integrity check.

Note:

Oracle supports using the ocrcheck command when, at a minimum, the Oracle Cluster Ready Services stack is OFFLINE on all nodes in the cluster because the command will run even if the stack is ONLINE but it can falsely indicate that the OCR is corrupt if the check happens while an update to OCR is underway.

See Also:

"The Oracle Clusterware Technology Stack" for more information about the Oracle Cluster Ready Services stack

Syntax
ocrcheck [-local] [-config | -backupfile <backup_file_name>] [-details] [-help] 

You can run the ocrcheck -help command to display usage information about this utility.

The -details option displays detailed OCR configuration information, including names for Oracle ASM disk groups.

Examples

The following examples show sample OCRCHECK command output and command usage.

Example J-1 OCRCHECK Utility Sample Output

# ocrcheck

Status of Oracle Cluster Registry is as follows :
        Version                  :          4
        Total space (kbytes)     :     409568
        Used space (kbytes)      :      17012
        Available space (kbytes) :     392556
        ID                       :  467263828
        Device/File Name         : +ocrdg1
                                   Device/File integrity check succeeded
        Device/File Name         : +ocrdg2
                                   Device/File integrity check succeeded
                                   Device/File not configured
                                   Device/File not configured
                                   Device/File not configured
        Cluster registry integrity check succeeded 
        Logical corruption check succeeded

Note:

The logical corruption check is only performed if you run the ocrcheck command as root.

Example J-2 shows using ocrcheck -local -config command to obtain OLR information.

Note:

Oracle supports using the ocrcheck -local command when both the Oracle Cluster Ready Services and Oracle High Availability Services stacks are OFFLINE on the local node.

See Also:

"The Oracle Clusterware Technology Stack" for more information about the Oracle Cluster Ready Services and Oracle High Availability Services stacks

Example J-2 Using OCRCHECK to Obtain OLR Information

$ ocrcheck -local -config

Oracle Local Registry configuration is :
        Device/File Name         : /oraclebase/crsdata/dglnx6/olr/dglnx6_19.olr

Example J-3 shows using the ocrcheck -config -details command to obtain the location of OCR in an Oracle ASM disk group.

Example J-3 Using OCRCHECK to Obtain OCR Information

$ ocrcheck -config -details

Oracle Cluster Registry configuration is :
        Device/File Name         : +ocrvd11/mjk_1/OCRFILE/registry.255.842574113
        Device/File Name         : +ocrdv2/mjk_1/OCRFILE/registry.255.842574125

Example J-4 shows using the ocrcheck -details command to obtain a greater level of detail for the OCR configuration.

Example J-4 Using OCRCHECK to Obtain More OCR Information

$ ocrcheck -details

Status of Oracle Cluster Registry is as follows :
        Version                  :          4
        Total space (kbytes)     :     409568
        Used space (kbytes)      :      17012
        Available space (kbytes) :     392556
        ID                       :  467263828
        Device/File Name         : +OCRVD11/mycluster/OCRFILE/registry.255.842574113
                                   Device/File integrity check succeeded
        Device/File Name         : +OCRVD2/mycluster/OCRFILE/registry.255.842574125
                                   Device/File integrity check succeeded
                                   Device/File not configured
                                   Device/File not configured
                                   Device/File not configured
        Cluster registry integrity check succeeded 
        Logical corruption check succeeded

Example J-5 shows using the ocrcheck -details command to obtain backup file information.

Example J-5 Using OCRCHECK to Obtain Backup File Information

% ocrcheck -backupfile +bkupdg:/sbezawadhtest/OCRBACKUP/backup00.ocr.258.919047805

Status of backup file is as follows:
Version : 4
Used space (kbytes) : 17012
Device/File Name : +bkupdg:/sbezawadhtest/OCRBACKUP/backup00.ocr.258.919047805
Device/File integrity check succeeded
Backup file integrity check succeeded
Logical corruption check succeeded
Consistency check of entities managed by Cluster Ready Services succeeded.

OCRCHECK creates a log file in the ORACLE_BASE/diag/crs/host_name/crs directory. To change the log level, edit the ORACLE_BASE/crsdata/host_name/crsdiag/ocrcheck.ini file. The ORACLE_BASE, in this case, is for the Oracle Grid Infrastructure software home.

Using the OCRDUMP Utility to View Oracle Cluster Registry Content

The OCRDUMP utility enables you to view OCR and OLR contents by writing the content to a file or stdout in a readable format.

This section explains how to use the OCRDUMP utility to view OCR and Oracle Local Registry (OLR) content for troubleshooting.

You can use several options for OCRDUMP. For example, you can limit the output to a key and its descendents. You can also write the contents to an XML file that you can view using a browser. OCRDUMP writes the OCR keys as ASCII strings and values in a data type format. OCRDUMP retrieves header information based on a best effort basis.

OCRDUMP creates a log file in ORACLE_BASE/diag/crs/host_name/crs. To change the log level, edit the ORACLE_BASE/crsdata/host_name/crsdiag/ocrlog.ini file.

To change the logging component, edit the entry containing the comploglvl= entry. For example, to change the log level of the OCRAPI component to 3 and to change the log level of the OCRRAW component to 5, make the following entry in the ocrlog.ini file:

comploglvl="OCRAPI:3;OCRRAW:5"

Note:

Make sure that you have file creation privileges in the Grid_home directory before using the OCRDUMP utility.

This section includes the following topics:

OCRDUMP Utility Syntax and Options

This section describes the OCRDUMP utility command syntax and usage. Run the ocrdump command with the following syntax where file_name is the name of a target file to which you want Oracle Database to write the Oracle Cluster Registry output and where key_name is the name of a key from which you want Oracle Database to write Oracle Cluster Registry subtree content:

$ ocrdump [file_name | -stdout] [-local] [-backupfile backup_file_name
[-keyname key_name] [-xml] [-noheader]
]

Table J-2 describes the OCRDUMP utility options and option descriptions.

Table J-2 OCRDUMP Options and Option Descriptions

Options Description

file_name

The name of a file to which you want OCRDUMP to write output.

By default, OCRDUMP writes output to a predefined output file named OCRDUMPFILE. The file_name option redirects OCRDUMP output to a file that you specify.

-stdout

Use this option to redirect the OCRDUMP output to the text terminal that initiated the program.

If you do not redirect the output, OCRDUMP writes output to a predefined output file named OCRDUMPFILE.

-local

Use this option to dump the contents of OLR.

-backupfile

Use this option to view the contents of an OCR backup file. Use the -local option with this option to view the contents of an OLR backup file.

backup_file_name

The name of the backup file with the content you want to view. You can query the backups using the ocrconfig -showbackup command. If the backup file is located in an Oracle ASM disk group, then ensure that the disk group exists and is mounted.

-keyname key_name

The name of an Oracle Cluster Registry key whose subtree is to be dumped.

-xml

Use this option to write the output in XML format.

-noheader

Does not print the time at which you ran the command and when the Oracle Cluster Registry configuration occurred.

OCRDUMP Utility Examples

The following ocrdump utility examples extract various types of OCR information and write it to various targets:

ocrdump

Writes OCR content to a file called OCRDUMPFILE in the current directory.

ocrdump MYFILE

Writes OCR content to a file called MYFILE in the current directory.

ocrdump -stdout -keyname SYSTEM

Displays OCR content from the subtree of the key SYSTEM in the terminal window.

ocrdump -stdout -xml

Displays OCR content in the terminal window in XML format.

ocrdump -stdout -backupfile Grid_home/cdata/cluster_name/file_name

Displays the content of the in the Grid_home/cdata/cluster_name/file_name directory. You must run this command as root to be able to view all of the keys. Be sure to name the file appropriately so that it can be recognized by anyone as an OCR backup file, such as BACKUPOO.ocr.

Sample OCRDUMP Utility Output

The following OCRDUMP examples show the KEYNAME, VALUE TYPE, VALUE, permission set (user, group, world) and access rights for two sample runs of the ocrdump command. The following shows the output for the SYSTEM.language key that has a text value of AMERICAN_AMERICA.WE8ASCII37.

[SYSTEM.language]
ORATEXT : AMERICAN_AMERICA.WE8ASCII37
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ,
OTHER_PERMISSION : PROCR_READ, USER_NAME : user, GROUP_NAME : group}

The following shows the output for the SYSTEM.version key that has integer value of 3:

[SYSTEM.version]
UB4 (10) : 3
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ,
OTHER_PERMISSION : PROCR_READ, USER_NAME : user, GROUP_NAME : group}