Datatype Support and Conversion in Oracle Database Provider for DRDA

7 Datatype Support and Conversion in Oracle Database Provider for DRDA

Consider datatype support in Oracle, and conversion between Oracle and DRDA datatypes.

7.1 Overview of Datatype Conversion

DRDA utilizes Formatted Data Object Content Architecture (FD:OCA) for datatype encoding. Several types do not have a direct analog to Oracle native types, and require conversion. Also, some Oracle datatypes have no direct encoding support in FD:OCA.For example, consider Oracle NUMBER, which may contain a wide range of values, both integers and floating point. This duality prevents it from being mapped to a specific DRDA type, to mitigate loss of value of the number. Any choice of type will have some loss of either precision or scale at extreme ranges of value.

There are two datatype conversions used by Oracle Database Provider for DRDA: conversion of DRDA MetaData Descriptors to Oracle OCI interface types, and conversion of Oracle column types to DRDA MetaData Descriptors. For application programmers, these are described through the SQL Type of the bind variable or described column type. See sections “Conversion between DRDA Datatypes to Oracle Datatypes” and “Conversion of Oracle Datatype to DRDA.”

A general mechanism for mapping Oracle NUMBER is covered in section “Datatype Equivalence and Remapping”.

Related Topics

7.2 Numerical Range Considerations; General

When converting between Oracle NUMBER, IEEE floating point, IBM Hexadecimal floating point (HEX floating point, S390 or System390 floating point), and Decimal floating point (DECFLOAT) datatypes, note that they have different ranges and capabilities. For example, all values of IBM HEX FLOAT bind variables in a client-side program fit in an Oracle NUMBER, but not all values of Oracle NUMBER may be returned correctly in an IBM HEX FLOAT; DECFLOAT34 is a better choice.

Some other considerations include the following:

Infinities. Some floating point types support positive and negative infinities.

When infinities are used for datatypes that don't support them, the highest possible number for positive infinities and its negative for negative infinities is used.
Floating Point. IEEE FLOAT columns may be defined in Oracle with types of BINARY_FLOAT and BINARY_DOUBLE. In DB2 z/OS the floating point types (REAL, FLOAT, DOUBLE and DOUBLE PRECISION) are IBM HEX floating point. In DB2/400 and DB2 LUW, the floating point types (REAL, FLOAT, DOUBLE and DOUBLE PRECISION) are IEEE floating point.
Not a Number. Some datatypes support Not A Number (NAN), a special value to indicate either that no value was assigned, or the result of a computation is invalid or undefined.

7.2.1 Oracle NUMBER

Oracle NUMBER has the following characteristics:

Lower Range

1E-130

Upper Range

9.999 999 999 999 999 999 999 999 999 999 999 999 9E+125

Infinity

Supported for both negative and positive infinity

Not A Number

Not supported

7.2.2 FLOAT (IBM HEX or S390)

The following characteristics apply to FLOAT, DOUBLE and LONG DOUBLE sub datatypes.

Lower Range

5.397605 x 10^-79

Upper Range

7.237005 x 10⁺⁷⁵

Infinity

Not supported

Not A Number

Not supported

7.2.3 FLOAT (IEEE)

The following characteristics apply to FLOAT (Oracle BINARY_FLOAT), DOUBLE (Oracle BINARY_DOUBLE), and LONG DOUBLE sub datatypes.

Infinity

Supported for both positive and negative infinity

Not A Number

Supported

The bounds for the subtypes follow:

Lower Range

FLOAT (Oracle BINARY_FLOAT): 1.175 494 x 10^-38

DOUBLE (Oracle BINARY_DOUBLE): 2.225 074 x 10^-308

LONG DOUBLE: 3.362 103 x 10^-4932

Upper Range

FLOAT (Oracle BINARY_FLOAT): 3.402 823 x 10⁺³⁸

DOUBLE (Oracle BINARY_DOUBLE): 1.797 693 x 10⁺³⁰⁸

LONG DOUBLE: 1.189 731 x 10⁺⁴⁹³²

7.2.4 DECFLOAT

The following characteristics apply to DECFLOAT7, DECFLOAT16, and DECFLOAT34 sub datatypes.

Infinity

Supported for both positive and negative infinity

Not A Number

Supported

The bounds for the subtypes follow:

Lower Range

DECFLOAT7: 0.000 001 x 10^-95

DECFLOAT16: 0.000 000 000 000 001 x 10^-383

DECFLOAT34: 0.000 000 000 000 000 000 000 000 000 000 001 x 10^-6143

Upper Range

DECFLOAT7: 9.999 999 x 10⁺⁹⁶

DECFLOAT16: 9.999 999 999 999 999 x 10⁺³⁸⁴

DECFLOAT34: 9.999 999 999 999 999 999 999 999 999 999 999 x 10⁺⁶¹⁴⁴

7.3 Numerical Range Considerations, for COBOL Users

DRDA databases offer three options for integer types: SMALLINT (2 binary bytes), INTEGER (4 binary bytes), and BIGINT (8 binary bytes). During conversion, Oracle columns that hold equivalent values must be defined based on usage rather than on the type used in the DB2 CREATE TABLE definition.

The actual range of DRDA SMALLINT, INTEGER and BIGINT follows:

SMALLINT has a lower bound of -32,768 and an upper bound of 32,767
INTEGER has a lower bound of -2,147,483,648 and an upper bound of 2,147,483,647
BIGINT has a lower bound of -9,223,372,036,854,775,808 and an upper bound of 9,223,372,036,854,775,807

However, at the level of the application, the COBOL variables that hold these DRDA column values may be declared either with a fixed number of decimal digits, or with the full binary precision of the corresponding DRDA integer datatypes.

In COBOL, the equivalent binary integer datatypes are defined as follows:

USAGE of BINARY, COMPUTATIONAL, COMP, COMPUTATIONAL-4, and COMP-4; these are equivalent
PICTURE of S9(1-4) for a 2-byte integer, S9(5-9) for a 4-byte integer, and S9(10-18) for an 8-byte integer.

The value is normally limited to the number of digits in the picture.

For example PICTURE S9(4) COMP is a 2-byte integer that normally ranges from -32,768 to +32,767. However, the generated COBOL code only allows the value to range from -9,999 to +9,999. When using these types of bind variables exclusively to access and update DRDA SMALLINT, INTEGER, and BIGINT columns, define the columns in Oracle as NUMBER(n), where n matches the above PICTURE S9(n) definition.

When using BINARY, COMPUTATIONAL, COMP, COMPUTATIONAL-4, and COMP-4 COBOL variables with the TRUNC(BIN) COBOL compiler option, the binary integers may range to the full bounds of the datatype. Using COMPUTATIONAL-5 or COMP-5 has the same effect, regardless whether the TRUNC compiler option is in effect. When programming in COBOL, C, PL/I, or Assembler with a full range of the binary integers, define the Oracle column as NUMBER(n+1), where n matches the above PICTURE S9(n) definition.

Based on datatype and usage in DRDA, here are the recommended substitute Oracle datatypes:

Used with COBOL COMP:

SMALLINT should be converted to Oracle NUMBER(4)
INTEGER should be converted to Oracle NUMBER(9)
BIGINT should be converted to Oracle NUMBER(18)

Used with COBOL COMP, TRUNC(BIN), COMP-5, C, PL/I, or Assembler binary integer variables:

SMALLINT should be converted to Oracle NUMBER(5)
INTEGER should be converted to Oracle NUMBER(10)
BIGINT should be converted to Oracle NUMBER(19)

7.3.1 Constraining Oracle NUMBER

When using the full range of binary integer values, it is advisable to implement Oracle constraints and limit the value to the range of the corresponding datatype.

For example, a DRDA SMALLINT gets an equivalent Oracle NUMBER column that supports a full range of SMALLINT values, only, as demonstrated in Example 7-1.

Note however that there is a performance penalty for specifying this type of check constraint, Oracle verifies all constraints every time the column is updated.

Example 7-1 Constraining Oracle NUMBER to Exactly Match DRDA SMALLINT

CREATE TABLE smint_tab
  (smint NUMBER(5) 
         CONSTRAINT check_smallint CHECK (smint BETWEEN -32768 AND 32767)
  )

7.4 Conversion between DRDA Datatypes to Oracle Datatypes

Consider the mappings between DRDA and Oracle datatypes.

Note the following abbreviations:

In a Single Byte Character Set (SBCS), the column can only contain single byte data.
In a Multi-Byte Character Set (MBCS), the column may contain a combination of single-byte and multi-byte characters.

7.4.1 INTEGER

4-byte binary number

SQL Type

496, 497

Size

4 bytes

Oracle Type

NUMBER(10)

7.4.2 SMALLINT

2-byte binary number

SQL Type

500, 501

Size

2 bytes

Oracle Type

NUMBER(5)

7.4.3 BIGINT

8-byte binary number

SQL Type

492, 493

Size

8 bytes

Oracle Type

NUMBER(19)

7.4.4 float

long double-precision (16 bytes)

SQL Type

480, 481

Range

54≤ b≤126

Oracle Type

NUMBER

7.4.5 DOUBLE PRECISION or FLOAT(b)

double-precision (8 bytes)

SQL Type

480, 481

Range

22≤ b≤ 53

Oracle Type

BINARY_DOUBLE

7.4.6 REAL or FLOAT(b)

Single-precision (4 bytes)

SQL Type

480, 481

Range

1≤b≤21

Oracle Type

BINARY_FLOAT

7.4.7 DECIMAL(p,s)

precision and scale packed decimal

SQL Type

484, 485

Range

1≤p≤31, 1≤s≤31

Oracle Type

NUMBER(p,s)

7.4.8 DECIMAL(p,s) zoned

precision and scale zoned decimal

SQL Type

488, 489

Range

1≤p≤31, 1≤s≤31

Oracle Type

NUMBER(p,s)

7.4.9 NUMERIC(p,s)

precision and scale character decimal

SQL Type

504, 505

Range

1≤p≤31, 1≤s≤31

Oracle Type

NUMBER(p,s)

7.4.10 DECFLOAT(n=34)

precision and scale, with exponent; subject to loss

SQL Type

996, 997

Range

n=34

Oracle Type

NUMBER

7.4.11 DECFLOAT(n=16)

precision and scale, with exponent; subject to loss

SQL Type

996, 997

Range

n=16

Oracle Type

NUMBER

7.4.12 CHAR(n)

sbcs and mixed

SQL Type

452,453

Range

1≤ n≤255

Oracle Type

CHAR

7.4.13 CHAR(n) for Bit Data

byte

SQL Type

452,453

Range

1≤ n≤255

Oracle Type

RAW

7.4.14 VARCHAR(n)

sbcs

SQL Type

448,449

Oracle Type

Fixed-length binary string

SQL Type

Mixed long variable-length character string; Oracle LONG supports up to 2^31-1 bytes, but only the first 32,767 bytes are currently returned.

SQL Type

448, 449

SQL Type Name

VARCHAR(32767) FOR MIXED DATA

7.5.5 LONG RAW

Binary long variable length character string; Oracle LONG RAW supports up to 2^31-1 bytes, but only the first 32,767 bytes are currently returned.

SQL Type

448, 449

SQL Type Name

VARCHAR(32767) FOR BIT DATA

7.5.6 NVARCHAR2(n)

National variable length character string

SQL Type

464, 465

National fixed length character string; there are two possibilities, determined by the range necessary for the datatype: converts to CHAR(n) for n under 256, and to VARCHAR(n) for longer character strings.

7.5.8.1 Shorter version

SQL Type

468, 469

Range

1 ≤ n ≤ 255

SQL Type Name

GRAPHIC(n)

7.5.8.2 Longer Version

SQL Type

VARCHAR(n) FOR MIXED DATA

n=148 for TIMESTAMP(0) WITH TIME ZONE; otherwise, 149+p for TIMESTAMP(p) WITH TIME ZONE

7.5.14 RAW(n)

Binary variable length string

SQL Type

908, 909

Range

1 ≤ n ≤ 2000

SQL Type Name

VARBINARY(n)

7.5.15 NUMBER and FLOAT

Oracle NUMBER and FLOAT may be used to represent several numeric types:

simple integer types with only a decimal precision
fixed-point decimal types with a specific precision and scale
floating point types with up to 38 decimal digits of precision and an exponent

Additionally, NUMBER may be defined with a scale that is greater than precision, with negative scale, and as a FLOAT with binary precision. See Table 7-1 and Table 7-2 for details.

Note that the general form of this datatype is NUMBER(p,s), where p is the variable for precision and s is the variable for scale.

Table 7-1 Converting Oracle NUMBER Variants to DRDA Datatypes

Oracle Variant of NUMBER(p,s)	DRDA Datatype	Notes
`NUMBER(1)`	`DECIMAL(1)`
`NUMBER(2-4)`	`SMALLINT`
`NUMBER(5-9`)	`INTEGER`
`NUMBER(10-18)`	`BIGINT`	Whenever the client does not support `BIGINT`, the mapping is made to `DECIMAL(n)`
`NUMBER(19-31)`	`DECIMAL(p)`
`NUMBER(1-31, 1-31)`	`DECIMAL(p,s)`	For both datatypes, `scale <= precision`
`NUMBER(32-38)`	`DECFLOAT34`	Whenever the client does not support `DECFLOAT`, the mapping is made to `DOUBLE.` Oracle `NUMBER(35-38)` is rounded to `34` digits during conversion.
`NUMBER(1-38, -s)` where scale is negative	`DECFLOAT34`	Whenever the client does not support `DECFLOAT`, the mapping is made to `DOUBLE`. Oracle `NUMBER(35-38)` is rounded to `34` digits during conversion.
`NUMBER(1-38, s)` where scale > precision	`DECFLOAT34`	Whenever the client does not support `DECFLOAT`, the mapping is made to `DOUBLE`. Oracle `NUMBER(35-38)` is rounded to `34` digits during conversion.
`NUMBER(32-38, s)` with any scale	`DECFLOAT34`	Whenever the client does not support `DECFLOAT`, the mapping is made to `DOUBLE`. Oracle `NUMBER(35-38)` is rounded to `34` digits during conversion.
`NUMBER`	`DECFLOAT34`	Whenever the client does not support `DECFLOAT`, the mapping is made to `DOUBLE`

Table 7-2 Converting Oracle FLOAT Variants to DRDA Datatypes

Oracle Variant of FLOAT(n) DRDA Datatype Notes

Oracle Variant of FLOAT(n)	DRDA Datatype	Notes
`FLOAT(1-53)`	`DECFLOAT16`	Whenever the client does not support `DECFLOAT`, the mapping is made to `DOUBLE`
`FLOAT(n)` where `n > 53`	`DECFLOAT34`	Whenever the client does not support `DECFLOAT`, the mapping is made to `DOUBLE`
`FLOAT`	`DECFLOAT34`	Whenever the client does not support `DECFLOAT`, the mapping is made to `DOUBLE`

FLOAT(1-53)

DECFLOAT16

Whenever the client does not support DECFLOAT, the mapping is made to DOUBLE

FLOAT(n)

where n > 53

DECFLOAT34

Whenever the client does not support DECFLOAT, the mapping is made to DOUBLE

FLOAT

DECFLOAT34

Whenever the client does not support DECFLOAT, the mapping is made to DOUBLE

7.6 Datatype Equivalence and Remapping

Oracle does not provide discrete database datatypes such as SMALLINT, INTEGER or BIGINT DRDA datatypes. In some cases, often to limit the column's range of values, it may become necessary to define a numeric column with specific precision or scale. Oracle therefore supplies a more flexible numeric database datatype, Oracle NUMBER, which may be defined by specified precision and scale. Oracle NUMBER may contain both integral and fractional values in the same column, if no specific range limitations have been defined for the column.

Consideration, therefore, must be made for appropriate database datatypes when migrating data from a non-Oracle database. This is particularly important when migrating applications that expect to handle data of a limited range or form.

For example, if the application accepts a data range specific to NUMBER(5), but the column is defined by datatype NUMBER, it is likely that an inappropriate or invalid values may be inserted into the column and causing data issues when using or retrieving that value.

If the table definition is mapped to a close approximation of the original non-Oracle data, there should be no datatype compatibility issues. However, in cases where data that was not modeled accurately must be accessed, or if a query uses an expression that yields a non-range limited datatype, it may become necessary to apply an alternate datatype that is more compatible.

Consider that the COUNT(*) expression results in a non-range limited Oracle NUMBER datatype. If the application expects the result of the query that uses COUNT to be represented as a DRDA INTEGER datatype, it becomes necessary perform one of the following steps to avoid a type mis-match:

change the application to use the Oracle NUMBER
change the query expression to CAST the result to the appropriate form
remap the resulting datatype form

Often, it is neither practical nor feasible to modify the application, and remapping the datatype is the only workable solution.

The Application Server has a limited facility to convert Oracle NUMBER datatype results to more discrete equivalent DRDA datatypes, on a per table or per column basis. This mechanism may also be used when the client AR is unable to properly convert the default mappings of Oracle NUMBER to DRDA datatype. See “Conversion of Oracle Datatype to DRDA” for all supported conversions.

Related Topics

Conversion of Oracle Datatype to DRDA

7.6.1 Applying Datatype Mapping

To apply datatype mappings, you must invoke the PL/SQL function. Refer the section on “SET_TYPEMAP.” The procedure SET_TYPEMAP implements a specified type conversion map for a specified table and column expression. The syntax for the type map object name is table_name:column_expression. The wildcard character, *, may be used in place of table name to include all tables with the specified column expression. It may also be used to indicate that all column expressions for a specified table that evaluate to an Oracle NUMBER be type mapped.

The syntax for converting from Oracle NUMBER to another datatype is NUMBER=datatype. See Oracle NUMBER TYPEMAP Datatype Names for available datatype names.

The default mapping of Oracle NUMBER is to DRDA DECFLOAT(34). “Using TYPEMAP in Queries that Use the Column Directly” shows that queries that use a column directly may use re-mapping on the retrieved column as a DRDA type INTEGER. When using a column in a function it may be necessary to apply a typemap for the expression, as described in “Using TYPEMAP in a function”.

Related Topics

Using TYPEMAP in Queries

7.6.2 Using TYPEMAP in Queries

Assume that an application expects an EMPLOYEE_ID value to be in a format of DRDA type INTEGER.

Example 7-2 Using TYPEMAP in Queries that Use the Column Directly

CREATE TABLE employees(employee_id NUMBER(6), first_name VARCHAR2(20), ...);

This mapping enforces range limitations. To facilitate this mapping, apply the following typemap entry for the applications package ORACLE.MYPACKAGE:

begin
   dbms_drdaas.set_typemap (
      'ORACLE', 'MYPACKAGE', 'EMPLOYEES:EMPLOYEE_ID',
      'NUMBER=INTEGER');
end;

7.6.3 Using TYPEMAP in Functions

When using the COUNT function against the column, as in

Example 7-3 Using TYPEMAP in a Function

SELECT COUNT(employee_id) FROM employees;

apply the following typemap expression:

begin
  dbms_drdaas.set_typemap (
    'ORACLE', 'MYPACKAGE', 'EMPLOYEES:COUNT(EMPLOYEE_ID)', 
    'NUMBER=INTEGER' );
end;

7.6.4 Oracle NUMBER TYPEMAP

Table 7-3 lists available typemap names and their conversion to DRDA datatypes.

Table 7-3 Oracle NUMBER TYPEMAP Datatype Names

Datatype Name	SQL Type	Datatype Size	Notes
`SMALLINT`	500, 501	`2` bytes	small integer
`INTEGER`	496, 497	`4` bytes	integer
`BIGINT`	492, 493	`8` bytes	large integer
`FLOAT`	480. 481	`4` bytes	single-precision floating point
`DOUBLE`	480, 481	`8` bytes	double-precision floating point