Purpose

Appends an element to the end of a collection.

Syntax

sword OCICollAppend ( OCIEnv              *env,
                      OCIError            *err,
                      const void          *elem, 
                      const void          *elemind,
                      OCIColl             *coll );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

elem (IN)

Pointer to the element to be appended to the end of the given collection.

elemind (IN) [optional]

Pointer to the element's NULL indicator information. If (elemind == NULL) then the NULL indicator information of the appended element is set to non-NULL.

coll (IN/OUT)

Updated collection.

Comments

Appending an element is equivalent to increasing the size of the collection by one element and updating (deep copying) the last element's data with the given element's data. Note that the pointer to the given element elem is not saved by this function, which means that elem is strictly an input parameter.

OCICollAppend() creates an element at index 0 if no elements exist. The method (array bind) for binding PL/SQL index-by tables assumes a start index of 1.

Returns

This function returns an error if the current size of the collection equals the maximum size (upper bound) of the collection before appending the element. This function also returns an error if any of the input parameters is NULL.

Purpose

Assigns (deep copies) one collection to another.

Syntax

sword OCICollAssign ( OCIEnv              *env, 
                      OCIError            *err, 
                      const OCIColl       *rhs, 
                      OCIColl             *lhs );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

rhs (IN)

Right-hand side (source) collection to be assigned from.

lhs (OUT)

Left-hand side (target) collection to be assigned to.

Comments

Assigns rhs (source) to lhs (target). The lhs collection may be decreased or increased depending upon the size of rhs. If the lhs collection contains any elements, then the elements are deleted before the assignment. This function performs a deep copy. The memory for the elements comes from the object cache.

Returns

An error is returned if the element types of the lhs and rhs collections do not match. Also, an error is returned if the upper bound of the lhs collection is less than the current number of elements in the rhs collection. An error is also returned if:

• Any of the input parameters is NULL

• There is a type mismatch between the lhs and rhs collections

• The upper bound of the lhs collection is less than the current number of elements in the rhs collection

Purpose

Assigns the given element value elem to the element at coll[index].

Syntax

sword OCICollAssignElem ( OCIEnv           *env, 
                          OCIError         *err, 
                          sb4               index, 
                          const void       *elem, 
                          const void       *elemind, 
                          OCIColl          *coll );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

index (IN)

Index of the element to which the element is assigned.

elem (IN)

Source element from which the element is assigned. See Table 24-1 that lists the type of data and what C data type can be found in parameter elem.

elemind (IN) [optional]

Pointer to the element's NULL indicator information; if (elemind == NULL), then the NULL indicator information of the assigned element is set to non-NULL.

coll (IN/OUT)

Collection to be updated.

Comments

If the collection is of type nested table, the element at the given index might not exist, as when an element has been deleted. In this case, the given element is inserted at index. Otherwise, the element at index is updated with the value of elem.

Note that the given element is deep copied, and elem is strictly an input parameter.

Returns

This function returns an error if any input parameter is NULL or if the given index is beyond the bounds of the given collection.

Purpose

Gets a pointer to the element at the given index.

Syntax

sword OCICollGetElem ( OCIEnv           *env, 
                       OCIError         *err, 
                       const OCIColl    *coll, 
                       sb4               index, 
                       boolean          *exists, 
                       void            **elem, 
                       void            **elemind );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

coll (IN)

Pointer to the element in this collection to be returned.

index (IN)

Index of the element whose pointer is returned.

exists (OUT)

Set to FALSE if the element at the specified index does not exist; otherwise, set to TRUE.

elem (OUT)

Address of the element to be returned.

elemind (OUT) [optional]

Address of the NULL indicator information is returned. If (elemind == NULL), then the NULL indicator information is not returned.

Comments

Gets the address of the element at the given position. Optionally, this function also returns the address of the element's NULL indicator information.

Table 28-3 describes for each OCI type code value, the element pointer type, and what the corresponding collection element type is. The element pointer is returned with the elem parameter of OCICollGetElem(). See the table for object data type mappings for object type attributes in About Mapping Object Data Types to Cfor a more complete list of the OCITypeCode values.

The element pointer returned by OCICollGetElem() is in a form that can be used not only to access the element data but also to serve as the target (left-hand side) of an assignment statement.

For example, assume the user is iterating over the elements of a collection whose element type is object reference (OCIRef*). A call to OCICollGetElem() returns the pointer to a reference handle (OCIRef**). After getting the pointer to the collection element, you may want to modify it by assigning a new reference.

The following code example shows how this can be accomplished with the OCIRefAssign() function.

Assigning a New Reference to the Pointer to the Collection Element

sword OCIRefAssign( OCIEnv       *env, 
                    OCIError     *err, 
                    const OCIRef *source, 
                    OCIRef       **target );

Note that the target parameter of OCIRefAssign() is of type OCIRef**. Hence OCICollGetElem() returns OCIRef**. If *target equals NULL, a new REF is allocated by OCIRefAssign() and returned in the target parameter.

Similarly, if the collection element was of type string (OCIString*), OCICollGetElem() returns the pointer to the string handle (that is, OCIString**). If a new string is assigned, through OCIStringAssign() or OCIStringAssignText(), the type of the target must be OCIString **.

If the collection element is of type Oracle NUMBER, OCICollGetElem() returns OCINumber*. The following code example shows the prototype of the OCINumberAssign() call.

Prototype of OCINumberAssign() Call

sword OCINumberAssign(OCIError        *err, 
                      const OCINumber *from,
                      OCINumber       *to);

Returns

The OCICollGetElem() function returns an error if any of the input parameters is NULL.

Purpose

Gets an array of elements from a collection when given a starting index.

Syntax

sword OCICollGetElemArray ( OCIEnv              *env,
                            OCIError            *err,
                            const OCIColl       *coll, 
                            sb4                  index,
                            boolean             *exists,
                            void               **elem,
                            void               **elemind,
                            uword               *nelems );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

coll (IN)

Pointers to the elements in this collection to be returned.

index (IN)

Starting index of the elements.

exists (OUT)

Is set to FALSE if the element at the specified index does not exist; otherwise, it is set to TRUE.

elem (OUT)

Address of the desired elements to be returned.

elemind (OUT) [optional]

Address of the NULL indicator information to be returned. If (elemind == NULL), then the NULL indicator information is not returned.

nelems (IN)

Maximum number of pointers to both elem and elemind.

Comments

Gets the address of the elements from the given position.

For index by integer collections, OCICollGetElemArray() gets the elements beginning at the given index, but loses the index information for each element in the process. Users are able to get the element data beginning at that index as an array, but cannot get the index for each element in the array. This behavior is similar to what happens for the OCIIterCreate(), OCIIterDelete(), OCIIterGetCurrent(), OCIIterInit(), OCIIterNext(), and OCIIterPrev() functions.

Returns

Optionally, this function also returns the address of the element's NULL indicator information.

Purpose

Indicates whether a collection is locator-based or not.

Syntax

sword OCICollIsLocator ( OCIEnv           *env, 
                         OCIError         *err,
                         const OCIColl    *coll, 
                         boolean          *result ); 

Parameters

env (IN)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

coll (IN)

A collection item.

result (OUT)

Returns TRUE if the collection item is locator-based, FALSE otherwise.

Comments

This function tests to see whether a collection is locator-based.

Returns

Returns TRUE in the result parameter if the collection item is locator-based; otherwise, it returns FALSE.

Purpose

Gets the maximum size in number of elements of the given collection.

Syntax

sb4 OCICollMax ( OCIEnv           *env,
                 const OCIColl    *coll );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

coll (IN)

Collection whose number of elements is returned. The coll parameter must point to a valid collection descriptor.

Comments

Returns the maximum number of elements that the given collection can hold. A value of zero indicates that the collection has no upper bound.

For collections that do not support negative indexes, the largest index number is also the maximum size of the collection. However, this is not true for index-by integer collections because some of the elements can have negative indexes, so the largest index numbered element is not the same as the maximum collection size.

Returns

The upper bound of the given collection.

The return value is always 0 (no upper bound) for index-by integer collections.

Purpose

Gets the current size in number of elements of the given collection.

Syntax

sword OCICollSize ( OCIEnv           *env,
                    OCIError         *err,
                    const OCIColl    *coll 
                    sb4              *size );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

coll (IN)

Collection whose number of elements is returned. Must point to a valid collection descriptor.

size (OUT)

Current number of elements in the collection.

Comments

Returns the current number of elements in the given collection. For a nested table, this count is not decremented when elements are deleted. So, this count includes any holes created by deleting elements. A trim operation (OCICollTrim()) decrements the count by the number of trimmed elements. To get the count minus the deleted elements use OCITableSize().

The following pseudocode shows some examples:

OCICollSize(...); 
// assume 'size' returned is equal to 5
OCITableDelete(...); // delete one element
OCICollSize(...);
// 'size' returned is still 5

To get the count minus the deleted elements use OCITableSize(). Continuing the earlier example:

OCITableSize(...)
// 'size' returned is equal to 4

A trim operation OCICollTrim()) decrements the count by the number of trimmed elements. Continuing the earlier example:

OCICollTrim(..,1..); // trim one element
OCICollSize(...);
// 'size' returned is equal to 4

Returns

The OCICollSize() function returns an error if an error occurs during the loading of the collection into the object cache or if any of the input parameters is NULL.

Purpose

Trims the given number of elements from the end of the collection.

Syntax

sword OCICollTrim ( OCIEnv         *env, 
                    OCIError       *err, 
                    sb4             trim_num, 
                    OCIColl        *coll );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

trim_num (IN)

Number of elements to trim.

coll (IN/OUT)

Removes (frees) trim_num of elements from the end of the collection coll.

Comments

The elements are removed from the end of the collection.

Returns

An error is returned if trim_num is greater than the current size of the collection.

Purpose

Creates an iterator to scan the elements or the collection.

Syntax

sword OCIIterCreate ( OCIEnv               *env, 
                      OCIError             *err, 
                      const OCIColl        *coll, 
                      OCIIter             **itr );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

coll (IN)

Collection that is scanned. For Oracle8i or later, valid collection types include varrays and nested tables.

itr (OUT)

Address to the allocated collection iterator to be returned by this function.

Comments

The iterator is created in the object cache. The iterator is initialized to point to the beginning of the collection.

If OCIIterNext() is called immediately after creating the iterator, then the first element of the collection is returned. If OCIIterPrev() is called immediately after creating the iterator, then an "at beginning of collection" error is returned.

For index-by integer collections, the OCIIterCreate(), OCIIterDelete(), OCIIterGetCurrent(), OCIIterInit(), OCIIterNext(), and OCIIterPrev() functions all ignore the index for each element in the collection. That is, OCIIterGetCurrent() returns only the element value and not the index of the element.

Returns

This function returns an error if any of the input parameters is NULL.

Purpose

Deletes a collection iterator.

Syntax

sword OCIIterDelete ( OCIEnv           *env, 
                      OCIError         *err, 
                      OCIIter         **itr );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

itr (IN/OUT)

The allocated collection iterator that is destroyed and set to NULL before returning.

Comments

Deletes an iterator that was previously created by a call to OCIIterCreate().

For index-by integer collections, the OCIIterCreate(), OCIIterDelete(), OCIIterGetCurrent(), OCIIterInit(), OCIIterNext(), and OCIIterPrev() functions all ignore the index for each element in the collection. That is, OCIIterGetCurrent() returns only the element value and not the index of the element.

Returns

This function returns an error if any of the input parameters is NULL.

Purpose

Gets a pointer to the current iterator collection element.

Syntax

sword OCIIterGetCurrent ( OCIEnv             *env, 
                          OCIError           *err, 
                          const OCIIter      *itr, 
                          void              **elem, 
                          void              **elemind );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

itr (IN)

Iterator that points to the current element.

elem (OUT)

Address of the element pointed to by the iterator to be returned. See Table 24-1 that lists the type of data and what C data type can be found in parameter elem.

elemind (OUT) [optional]

Address of the element's NULL indicator information to be returned; if (elem_ind == NULL) then the NULL indicator information is not returned.

Comments

Returns the pointer to the current iterator collection element and its corresponding NULL information.

For index-by integer collections, the OCIIterCreate(), OCIIterGetCurrent(), OCIIterInit(), OCIIterNext(), and OCIIterPrev() functions all ignore the index for each element in the collection. That is, OCIIterGetCurrent() returns only the element value and not the index of the element.

Returns

This function returns an error if any input parameter is NULL.

Purpose

Initializes an iterator to scan a collection.

Syntax

sword OCIIterInit ( OCIEnv              *env, 
                    OCIError            *err, 
                    const OCIColl       *coll, 
                    OCIIter             *itr );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

coll (IN)

Collection that is scanned. For Oracle8i or later, valid collection types include varrays and nested tables.

itr (IN/OUT)

Pointer to an allocated collection iterator.

Comments

Initializes at the given iterator to point to the beginning of the given collection. You can use this function to perform either of the following tasks:

• Reset an iterator to point back to the beginning of the collection.

• Reuse an allocated iterator to scan a different collection.

For index-by integer collections, the OCIIterCreate(), OCIIterDelete(), OCIIterGetCurrent(), OCIIterInit(), OCIIterNext(), and OCIIterPrev() functions all ignore the index for each element in the collection. That is, OCIIterGetCurrent() returns only the element value and not the index of the element.

Returns

Returns an error if any input parameter is NULL.

Purpose

Gets a pointer to the next iterator collection element.

Syntax

sword OCIIterNext ( OCIEnv            *env,
                    OCIError          *err, 
                    OCIIter           *itr, 
                    void             **elem,
                    void             **elemind,
                    boolean           *eoc);

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet()..

itr (IN/OUT)

Iterator that is updated to point to the next element.

elem (OUT)

Address of the next element; returned after the iterator is updated to point to it. See Table 24-1 that lists the type of data and what C data type can be found in parameter elem.

elemind (OUT) [optional]

Address of the element's NULL indicator information; if (elem_ind == NULL), then the NULL indicator information is not returned.

eoc (OUT)

TRUE if the iterator is at the end of the collection (that is, the next element does not exist); otherwise, FALSE.

Comments

This function returns a pointer to the next iterator collection element and its corresponding NULL information. It also updates the iterator to point to the next element.

If the iterator is pointing to the last element of the collection before you execute this function, then calling this function sets the eoc flag to TRUE. The iterator is left unchanged in that case.

For index-by integer collections, the OCIIterCreate(), OCIIterDelete(), OCIIterGetCurrent(), OCIIterInit(), OCIIterNext(), and OCIIterPrev() functions all ignore the index for each element in the collection. That is, OCIIterGetCurrent() returns only the element value and not the index of the element.

Returns

This function returns an error if any input parameter is NULL.

Purpose

Gets a pointer to the previous iterator collection element.

Syntax

sword OCIIterPrev ( OCIEnv            *env, 
                    OCIError          *err, 
                    OCIIter           *itr, 
                    void             **elem, 
                    void             **elemind,
                    boolean           *boc );

Parameters

env (IN/OUT)

The OCI environment handle initialized in object mode. See the descriptions of OCIEnvCreate(), OCIEnvNlsCreate(), and OCIInitialize() (deprecated) for more information.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

itr (IN/OUT)

Iterator that is updated to point to the previous element.

elem (OUT)

Address of the previous element; returned after the iterator is updated to point to it. See Table 24-1 that lists the type of data and what C data type can be found in parameter elem.

elemind (OUT) [optional]

Address of the element's NULL indicator information; if (elemind == NULL), then the NULL indicator information is not returned.

boc (OUT)

TRUE if iterator is at the beginning of the collection (that is, the previous element does not exist); otherwise, FALSE.

Comments

This function returns a pointer to the previous iterator collection element and its corresponding NULL information. The iterator is updated to point to the previous element.

If the iterator is pointing to the first element of the collection before you execute this function, then calling this function sets boc to TRUE. The iterator is left unchanged in that case.

For index-by integer collections, the OCIIterCreate(), OCIIterDelete(), OCIIterGetCurrent(), OCIIterInit(), OCIIterNext(), and OCIIterPrev() functions all ignore the index for each element in the collection. That is, OCIIterGetCurrent() returns only the element value and not the index of the element.

Returns

This function returns an error if any input parameter is NULL.