OCI String Manipulation Functions

Lists and describes OCI string manipulation functions.

Two types of data structures are supported for string manipulation:

Multibyte strings
Wide-character strings

Multibyte strings are encoded in native Oracle character sets. Functions that operate on multibyte strings take the string as a whole unit with the length of the string calculated in bytes. Wide-character (wchar) string functions provide more flexibility in string manipulation. They support character-based and string-based operations with the length of the string calculated in characters.

The wide-character data type is Oracle-specific and should not be confused with the wchar_t data type defined by the ANSI/ISO C standard. The Oracle wide-character data type is always 4 bytes in all operating systems, whereas the size of wchar_t depends on the implementation and the operating system. The Oracle wide-character data type normalizes multibyte characters so that they have a fixed width for easy processing. This guarantees no data loss for round-trip conversion between the Oracle wide-character set and the native character set.

String manipulation can be classified into the following categories:

Conversion of strings between multibyte and wide character
Character classifications
Case conversion
Calculations of display length
General string manipulation, such as comparison, concatenation, and searching

Table 31-4 summarizes the OCI string manipulation functions, which are described in this section.

Table 31-4 OCI String Manipulation Functions

Function	Purpose
OCIMultiByteInSizeToWideChar()	Convert part of a multibyte string into the wide-character string
OCIMultiByteStrCaseConversion()	Convert a multibyte string into the specified case and copies the result into the destination array
OCIMultiByteStrcat()	Append a multibyte string to the destination string
OCIMultiByteStrcmp()	Compare two multibyte strings by binary, linguistic, or case-insensitive comparison methods
OCIMultiByteStrcpy()	Copy a multibyte string into the destination array. It returns the number of bytes copied.
OCIMultiByteStrlen()	Return the number of bytes in a multibyte string
OCIMultiByteStrncat()	Append, at most, n bytes from a multibyte string to the destination string
OCIMultiByteStrncmp()	Compare two multibyte strings by binary, linguistic, or case-insensitive comparison methods. Each string is in the specified length
OCIMultiByteStrncpy()	Copy a specified number of bytes of a multibyte string into the destination array
OCIMultiByteStrnDisplayLength()	Return the number of display positions occupied by the multibyte string within the range of n bytes
OCIMultiByteToWideChar()	Convert a `NULL`-terminated multibyte string into wide-character format
"OCIWideCharInSizeToMultiByte()"	Convert part of a wide-character string to the multibyte string
OCIWideCharMultiByteLength()	Determine the number of bytes required for a wide character in multibyte encoding
OCIWideCharStrCaseConversion()	Convert a wide-character string into the specified case and copies the result into the destination array
OCIWideCharStrcat()	Append a wide-character string to the destination string
OCIWideCharStrchr()	Search for the first occurrence of a wide character in a string. Return a point to the wide character if the search is successful.
OCIWideCharStrcmp()	Compare two wide-character strings by binary, linguistic, or case-insensitive comparison methods
OCIWideCharStrcpy()	Copy a wide-character string into a destination array. Return the number of characters copied.
OCIWideCharStrlen()	Return the number of characters in a wide-character string
OCIWideCharStrncat()	Append, at most, n characters from a wide-character string to the destination string
OCIWideCharStrncmp()	Compare two wide-character strings by binary, linguistic, or case-insensitive methods. Each string is a specified length.
OCIWideCharStrncpy()	Copy, at most, n characters of a wide-character string into the destination array
OCIWideCharStrrchr()	Search for the last occurrence of a character in a wide-character string
OCIWideCharToLower()	Convert a specified wide character into the corresponding lowercase character
OCIWideCharToMultiByte()	Convert a `NULL`-terminated wide-character string into a multibyte string
OCIWideCharToUpper()	Convert a specified wide character into the corresponding uppercase character

OCIMultiByteInSizeToWideChar()

Converts part of a multibyte string into the wide-character string.

Purpose

Converts part of a multibyte string into the wide-character string.

Syntax

sword OCIMultiByteInSizeToWideChar ( void          *hndl,
                                     OCIWchar      *dst,
                                     size_t         dstsz,
                                     const OraText *src,
                                     size_t         srcsz,
                                     size_t        *rsize );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set of the string.
dst (OUT): Pointer to a destination buffer for wchar. It can be a NULL pointer when dstsz is zero.
dstsz (IN): Destination buffer size in number of characters. If it is zero, then this function returns the number of characters needed for the conversion.
src (IN): Source string to be converted.
srcsz (IN): Length of source string in bytes.
rsize (OUT): Number of characters written into the destination buffer, or number of characters for the converted string if dstsz is zero. If it is a NULL pointer, then nothing is returned.

Comments

This routine converts part of a multibyte string into the wide-character string. It converts as many complete characters as it can until it reaches the output buffer size limit or input buffer size limit or it reaches a NULL terminator in a source string. The output buffer is NULL-terminated if space permits. If dstsz is zero, then this function returns only the number of characters not including the ending NULL terminator needed for a converted string. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

OCI_SUCCESS; OCI_INVALID_HANDLE; or OCI_ERROR.

Related Topics

OCIMultiByteStrCaseConversion()

Converts a multibyte string into the specified case and copies the result into the destination array.

Purpose

Converts the multibyte string pointed to by srcstr into uppercase or lowercase as specified by the flag and copies the result into the array pointed to by dststr.

Syntax

size_t OCIMultiByteStrCaseConversion ( void           *hndl, 
                                       OraText        *dststr, 
                                       const OraText  *srcstr, 
                                       ub4             flag );

Parameters

hndl (IN/OUT): OCI environment or user session handle.
dststr (OUT): Pointer to destination array. The result string is NULL-terminated.
srcstr (IN): Pointer to source string.
flag (IN): Specify the case to which to convert:

OCI_NLS_UPPERCASE: Convert to uppercase.
OCI_NLS_LOWERCASE: Convert to lowercase.

This flag can be used with OCI_NLS_LINGUISTIC to specify that the linguistic setting in the locale is used for case conversion.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of bytes in the result string, not including the NULL terminator.

OCIMultiByteStrcat()

Appends a multibyte string to the destination string.

Purpose

Appends a copy of the multibyte string pointed to by srcstr to the end of the string pointed to by dststr.

Syntax

size_t OCIMultiByteStrcat ( void            *hndl, 
                            OraText         *dststr, 
                            const OraText   *srcstr );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
dststr (IN/OUT): Pointer to the destination multibyte string for appending. The output buffer is NULL-terminated.
srcstr (IN): Pointer to the source string to append.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of bytes in the result string, not including the NULL terminator.

Related Topics

OCIMultiByteStrcmp()

Compares two multibyte strings by binary, linguistic, or case-insensitive comparison methods.

Purpose

Compares two multibyte strings by binary, linguistic, or case-insensitive comparison methods.

Syntax

int OCIMultiByteStrcmp ( void            *hndl, 
                         const OraText   *str1, 
                         const OraText   *str2, 
                         int              flag );

Parameters

hndl (IN/OUT): OCI environment or user session handle.
str1 (IN): Pointer to a NULL-terminated string.
str2 (IN): Pointer to a NULL-terminated string.
flag (IN): It is used to decide the comparison method. It can take one of these values:

OCI_NLS_BINARY: Binary comparison This is the default value.
OCI_NLS_LINGUISTIC: Linguistic comparison specified in the locale.

This flag can be used with OCI_NLS_CASE_INSENSITIVE for case-insensitive comparison. For example, use OCI_NLS_LINGUISTIC|OCI_NLS_CASE_INSENSITIVE to compare strings linguistically without regard to case.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The return values for the function are:

0, if str1 = str2
Positive, if str1 > str2
Negative, if str1 < str2

Related Topics

OCIMultiByteStrcpy()

Copies a multibyte string into the destination array. It returns the number of bytes copied.

Purpose

Copies the multibyte string pointed to by srcstr into the array pointed to by dststr.

Syntax

size_t OCIMultiByteStrcpy ( void            *hndl, 
                            OraText         *dststr, 
                            const OraText   *srcstr );

Parameters

hndl (IN/OUT): Pointer to the OCI environment or user session handle.
dststr (OUT): Pointer to the destination buffer. The output buffer is NULL-terminated.
srcstr (IN): Pointer to the source multibyte string.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of bytes copied, not including the NULL terminator.

Related Topics

OCIMultiByteStrlen()

Returns the number of bytes in a multibyte string.

Purpose

Returns the number of bytes in the multibyte string pointed to by str, not including the NULL terminator.

Syntax

size_t OCIMultiByteStrlen ( void           *hndl, 
                            const OraText  *str );

Parameters

hndl (IN/OUT): Pointer to the OCI environment or user session handle.
str (IN): Pointer to the source multibyte string.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of bytes, not including the NULL terminator.

Related Topics

OCIMultiByteStrncat()

Appends, at most, n bytes from a multibyte string to the destination string.

Purpose

Appends a specified number of bytes from a multibyte string to a destination string.

Syntax

size_t OCIMultiByteStrncat ( void            *hndl, 
                             OraText         *dststr, 
                             const OraText   *srcstr, 
                             size_t           n );

Parameters

hndl (IN/OUT): Pointer to OCI environment or user session handle.
dststr (IN/OUT): Pointer to the destination multibyte string for appending.
srcstr (IN): Pointer to the source multibyte string to append.
n (IN): The number of bytes from srcstr to append.

Comments

This function is similar to OCIMultiByteStrcat(). At most, n bytes from srcstr are appended to dststr. Note that the NULL terminator in srcstr stops appending, and the function appends as many character as possible within n bytes. The dststr parameter is NULL-terminated. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of bytes in the result string, not including the NULL terminator.

Related Topics

OCIMultiByteStrncmp()

Compares two multibyte strings by binary, linguistic, or case-insensitive comparison methods. Each string is in the specified length.

Purpose

Compares two multibyte strings by binary, linguistic, or case-insensitive comparison methods. A length is specified for each string.

Syntax

int OCIMultiByteStrncmp ( void           *hndl,
                          const OraText  *str1,
                          size_t          len1,
                          OraText        *str2,
                          size_t          len2,
                          int             flag );

Parameters

hndl (IN/OUT): OCI environment or user session handle.
str1 (IN): Pointer to the first string.
len1 (IN): The length of the first string to compare.
str2 (IN): Pointer to the second string.
len2 (IN): The length of the second string to compare.
flag (IN): It is used to decide the comparison method. It can take one of these values:

OCI_NLS_BINARY: Binary comparison. This is the default value.
OCI_NLS_LINGUISTIC: Linguistic comparison specified in the locale.

Comments

This function is similar to OCIMultiByteStrcmp(), except that, at most, len1 bytes from str1 and len2 bytes from str2 are compared. The NULL terminator is used in the comparison. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The return values for the function are:

0, if str1 = str2
Positive, if str1 > str2
Negative, if str1 < str2

Related Topics

OCIMultiByteStrncpy()

Copies a specified number of bytes of a multibyte string into the destination array.

Purpose

Copies a multibyte string into an array.

Syntax

size_t OCIMultiByteStrncpy ( void            *hndl, 
                             OraText         *dststr, 
                             const OraText   *srcstr, 
                             size_t           n );

Parameters

hndl (IN/OUT): Pointer to OCI environment or user session handle.
dststr (IN): Pointer to the source multibyte string.
srcstr (OUT): Pointer to the destination buffer.
n (IN): The number of bytes from srcstr to copy.

Comments

This function is similar to OCIMultiByteStrcpy(). At most, n bytes are copied from the array pointed to by srcstr to the array pointed to by dststr. Note that the NULL terminator in srcstr stops copying, and the function copies as many characters as possible within n bytes. The result string is NULL-terminated. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of bytes in the resulting string, not including the NULL terminator.

Related Topics

OCIMultiByteStrnDisplayLength()

Returns the number of display positions occupied by the multibyte string within the range of n bytes.

Purpose

Returns the number of display positions occupied by the multibyte string within the range of n bytes.

Syntax

size_t OCIMultiByteStrnDisplayLength ( void            *hndl, 
                                       const OraText   *str1, 
                                       size_t           n );

Parameters

hndl (IN/OUT): OCI environment or user session handle.
str1 (IN): Pointer to a multibyte string.
n (IN): The number of bytes to examine.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of display positions.

Related Topics

OCIEnvNlsCreate()

OCIMultiByteToWideChar()

Converts a NULL-terminated multibyte string into wide-character format.

Purpose

Converts an entire NULL-terminated string into the wide-character string.

Syntax

sword OCIMultiByteToWideChar ( void            *hndl, 
                               OCIWchar        *dst, 
                               const OraText   *src, 
                               size_t          *rsize );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set of the string.
dst (OUT): Destination buffer for wchar.
src (IN): Source string to be converted.
rsize (OUT): Number of characters converted, including NULL terminator. If it is a NULL pointer, then nothing is returned.

Comments

The wchar output buffer is NULL-terminated. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

OCI_SUCCESS; OCI_INVALID_HANDLE; or OCI_ERROR.

Related Topics

OCIWideCharInSizeToMultiByte()

Converts part of a wide-character string to the multibyte string.

Purpose

Converts part of a wide-character string to multibyte format.

Syntax

sword OCIWideCharInSizeToMultiByte ( void             *hndl, 
                                     OraText          *dst, 
                                     size_t            dstsz, 
                                     const OCIWchar   *src, 
                                     size_t            srcsz, 
                                     size_t           *rsize );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set of string.
dst (OUT): Destination buffer for multibyte. It can be a NULL pointer if dstsz is zero.
dstsz (IN): Destination buffer size in bytes. If it is zero, then the function returns the size in bytes need for converted string.
src (IN): Source wchar string to be converted.
srcsz (IN): Length of source string in characters.
rsize (OUT): Number of bytes written into destination buffer, or number of bytes needed to store the converted string if dstsz is zero. If it is a NULL pointer, then nothing is returned.

Comments

Converts part of a wide-character string into the multibyte format. It converts as many complete characters as it can until it reaches the output buffer size or the input buffer size or until it reaches a NULL terminator in the source string. The output buffer is NULL-terminated if space permits. If dstsz is zero, then the function returns the size in bytes, not including the NULL terminator needed to store the converted string. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

OCI_SUCCESS; OCI_INVALID_HANDLE; or OCI_ERROR.

Related Topics

OCIEnvNlsCreate()

OCIWideCharMultiByteLength()

Determines the number of bytes required for a wide character in multibyte encoding.

Purpose

Determines the number of bytes required for a wide character in multibyte encoding.

Syntax

size_t OCIWideCharMultiByteLength ( void      *hndl, 
                                    OCIWchar   wc );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wc (IN): The wchar character.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in function, then this function produces an error.

Returns

The number of bytes required for the wide character.

Related Topics

OCIEnvNlsCreate()

OCIWideCharStrCaseConversion()

Converts a wide-character string into the specified case and copies the result into the destination array.

Purpose

Converts a wide-character string into a specified case and copies the result into the destination array.

Syntax

size_t OCIWideCharStrCaseConversion ( void              *hndl, 
                                      OraText           *dststr, 
                                      const OraText     *srcstr, 
                                      ub4                flag );

Parameters

hndl (IN/OUT): OCI environment or user session handle.
dststr (OUT): Pointer to destination array. The result string is NULL-terminated.
srcstr (IN): Pointer to source string.
flag (IN): Specify the case to which to convert:

OCI_NLS_UPPERCASE: Convert to uppercase.
OCI_NLS_LOWERCASE: Convert to lowercase.

This flag can be used with OCI_NLS_LINGUISTIC to specify that the linguistic setting in the locale is used for case conversion.

Comments

Converts the wide-character string pointed to by srcstr into uppercase or lowercase as specified by the flag and copies the result into the array pointed to by dststr. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of bytes in the result string, not including the NULL terminator.

Related Topics

OCIEnvNlsCreate()

OCIWideCharStrcat()

Appends a wide-character string to the destination string.

Purpose

Appends the wide-character string pointed to by wsrcstr to the wide-character string pointed to by wdststr.

Syntax

size_t OCIWideCharStrcat ( void             *hndl, 
                           OCIWchar         *wdststr, 
                           const OCIWchar   *wsrcstr );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wdststr (IN/OUT): Pointer to the destination wchar string. The output buffer is NULL-terminated.
wsrcstr (IN): Pointer to the source wide-character string to append.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of characters in the result string, not including the NULL terminator.

Related Topics

OCIWideCharStrchr()

Searches for the first occurrence of a wide character in a string. Returns a point to the wide character if the search is successful.

Purpose

Searches for the first occurrence of a specified character in a wide-character string.

Syntax

OCIWchar *OCIWideCharStrchr ( void             *hndl, 
                              const OCIWchar   *wstr, 
                              OCIWchar          wc );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wstr (IN): Pointer to the wchar string to search.
wc (IN): The wchar to search for.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

A wchar pointer if successful; otherwise, a NULL pointer.

Related Topics

OCIWideCharStrcmp()

Compares two wide-character strings by binary, linguistic, or case-insensitive comparison methods.

Purpose

Compares two wide-character strings by binary (based on wchar encoding value), linguistic, or case-insensitive comparison methods.

Syntax

int OCIWideCharStrcmp ( void             *hndl, 
                        const OCIWchar   *wstr1, 
                        const OCIWchar   *wstr2, 
                        int               flag );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wstr1 (IN): Pointer to a NULL-terminated wchar string.
wstr2 (IN): Pointer to a NULL-terminated wchar string.
flag (IN): Used to decide the comparison method. It can take one of these values:

OCI_NLS_BINARY: Binary comparison. This is the default value.
OCI_NLS_LINGUISTIC: Linguistic comparison specified in the locale definition.

The UNICODE_BINARY sort method cannot be used with OCIWideCharStrcmp() to perform a linguistic comparison of supplied wide-character arguments.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The return values for the function are:

0, if wstr1 = wstr2
Positive, if wstr1 > wstr2
Negative, if wstr1 < wstr2

Related Topics

OCIWideCharStrcpy()

Copies a wide-character string into a destination array. Returns the number of characters copied.

Purpose

Copies a wide-character string into an array.

Syntax

size_t OCIWideCharStrcpy ( void             *hndl, 
                           OCIWchar         *wdststr, 
                           const OCIWchar   *wsrcstr );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wdststr (OUT): Pointer to the destination wchar buffer. The result string is NULL-terminated.
wsrcstr (IN): Pointer to the source wchar string.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of characters copied, not including the NULL terminator.

Related Topics

OCIWideCharStrlen()

Return the number of characters in a wide-character string.

Purpose

Returns the number of characters in a wide-character string.

Syntax

size_t OCIWideCharStrlen ( void             *hndl, 
                           const OCIWchar   *wstr );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wstr (IN): Pointer to the source wchar string.

Comments

Returns the number of characters in the wchar string pointed to by wstr, not including the NULL terminator. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of characters, not including the NULL terminator.

Related Topics

OCIEnvNlsCreate()

OCIWideCharStrncat()

Appends, at most, n characters from a wide-character string to the destination string.

Purpose

Appends, at most, n characters from a wide-character string to the destination.

Syntax

size_t OCIWideCharStrncat ( void             *hndl, 
                            OCIWchar         *wdststr, 
                            const OCIWchar   *wsrcstr, 
                            size_t            n );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wdststr (IN/OUT): Pointer to the destination wchar string.
wsrcstr (IN): Pointer to the source wchar string.
n (IN): Number of characters from wsrcstr to append.

Comments

This function is similar to OCIWideCharStrcat(). At most, n characters from wsrcstr are appended to wdststr. Note that the NULL terminator in wsrcstr stops appending. The wdststr parameter is NULL-terminated. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of characters in the result string, not including the NULL terminator.

Related Topics

OCIWideCharStrncmp()

Compares two wide-character strings by binary, linguistic, or case-insensitive methods. Each string is a specified length.

Purpose

Compares two wide-character strings by binary, linguistic, or case-sensitive methods. Each string has a specified length.

Syntax

int OCIWideCharStrncmp ( void                *hndl, 
                         const OCIWchar      *wstr1, 
                         size_t               len1, 
                         const OCIWchar      *wstr2, 
                         size_t               len2, 
                         int                  flag );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wstr1 (IN): Pointer to the first wchar string.
len1 (IN): The length from the first string for comparison.
wstr2 (IN): Pointer to the second wchar string.
len2 (IN): The length from the second string for comparison.
flag (IN): It is used to decide the comparison method. It can take one of these values:

OCI_NLS_BINARY: For the binary comparison, this is default value.
OCI_NLS_LINGUISTIC: For the linguistic comparison specified in the locale.

This flag can be used with OCI_NLS_CASE_INSENSITIVE for case-insensitive comparison. For example, use OCI_NLS_LINGUISTIC|OCI_NLS_CASE_INSENSITIVE to compare strings linguistically without regard to case.

Comments

This function is similar to OCIWideCharStrcmp(). It compares two wide-character strings by binary, linguistic, or case-insensitive comparison methods. At most, len1 bytes from wstr1 and len2 bytes from wstr2 are compared. The NULL terminator is used in the comparison. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

The UNICODE_BINARY sort method cannot be used with OCIWideCharStrncmp() to perform a linguistic comparison of supplied wide-character arguments.

Returns

The return values for the function are:

0, if wstr1 = wstr2
Positive, if wstr1 > wstr2
Negative, if wstr1 < wstr2

Related Topics

OCIWideCharStrncpy()

Copies, at most, n characters of a wide-character string into the destination array.

Purpose

Copies, at most, n characters from a wide-character string into a destination.

Syntax

size_t OCIWideCharStrncpy ( void             *hndl, 
                            OCIWchar         *wdststr, 
                            const OCIWchar   *wsrcstr, 
                            size_t            n );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wdststr (OUT): Pointer to the destination wchar buffer.
wsrcstr (IN): Pointer to the source wchar string.
n (IN): Number of characters from wsrcstr to copy.

Comments

This function is similar to OCIWideCharStrcpy(), except that, at most, n characters are copied from the array pointed to by wsrcstr to the array pointed to by wdststr. Note that the NULL terminator in wdststr stops copying, and the result string is NULL-terminated. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The number of characters copied, not including the NULL terminator.

Related Topics

OCIWideCharStrrchr()

Searches for the last occurrence of a character in a wide-character string.

Purpose

Searches for the last occurrence of a character in a wide-character string.

Syntax

OCIWchar *OCIWideCharStrrchr ( void              *hndl, 
                               const OCIWchar    *wstr, 
                               OCIWchar           wc );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wstr (IN): Pointer to the wchar string to search in.
wc (IN): The wchar to search for.

Comments

Searches for the last occurrence of wc in the wchar string pointed to by wstr. If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

The wchar pointer if successful; otherwise, a NULL pointer.

Related Topics

OCIWideCharToLower()

Converts a specified wide character into the corresponding lowercase character.

Purpose

Converts the wide-character string specified by wc into the corresponding lowercase character, if it exists, in the specified locale. If no corresponding lowercase character exists, then it returns wc itself.

Syntax

OCIWchar OCIWideCharToLower ( void        *hndl, 
                              OCIWchar     wc );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wc (IN): The wchar for lowercase conversion.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

A wchar.

Related Topics

OCIWideCharToMultiByte()

Converts a NULL-terminated wide-character string into a multibyte string.

Purpose

Converts an entire NULL-terminated wide-character string into a multibyte string.

Syntax

sword OCIWideCharToMultiByte ( void             *hndl, 
                               OraText          *dst, 
                               const OCIWchar   *src, 
                               size_t           *rsize );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set of the string.
dst (OUT): Destination buffer for a multibyte string. The output buffer is NULL-terminated.
src (IN): Source wchar string to be converted.
rsize (OUT): Number of bytes written into destination buffer. If it is a NULL pointer, then nothing is returned.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

OCI_SUCCESS; OCI_INVALID_HANDLE; or OCI_ERROR.

Related Topics

OCIWideCharToUpper()

Converts a specified wide character into the corresponding uppercase character.

Purpose

Converts the wide-character string specified by wc into the corresponding uppercase character, if it exists, in the specified locale. If no corresponding uppercase character exists, then it returns wc itself.

Syntax

OCIWchar OCIWideCharToUpper ( void      *hndl, 
                              OCIWchar   wc );

Parameters

hndl (IN/OUT): OCI environment or user session handle to determine the character set.
wc (IN): The wchar for uppercase conversion.

Comments

If OCI_UTF16ID is specified for SQL CHAR data in the OCIEnvNlsCreate() function, then this function produces an error.

Returns

A wchar.

Related Topics