6 Local Naming Parameters in the tnsnames.ora File

This chapter provides a complete listing of the tnsnames.ora file configuration parameters.

6.1 Overview of Local Naming Parameters

The tnsnames.ora file is a configuration file that contains network service names mapped to connect descriptors for the local naming method, or net service names mapped to listener protocol addresses.

A net service name is an alias mapped to a database network address contained in a connect descriptor. A connect descriptor contains the location of the listener through a protocol address and the service name of the database to which to connect. Clients and database servers (that are clients of other database servers) use the net service name when making a connection with an application.

By default, the tnsnames.ora file is located in the ORACLE_HOME/network/admin directory. Oracle Net will check the other directories for the configuration file. For example, the order checking the tnsnames.ora file is as follows:

  1. The directory specified by the TNS_ADMIN environment variable. If the file is not found in the directory specified, then it is assumed that the file does not exist.

  2. If the TNS_ADMIN environment variable is not set, then Oracle Net checks the ORACLE_HOME/network/admin directory.

Note:

On Microsoft Windows, the TNS_ADMIN environment variable is used if it is set in the environment of the process. If the TNS_ADMIN environment variable is not defined in the environment, or the process is a service which does not have an environment, then Microsoft Windows scans the registry for a TNS_ADMIN parameter.

See Also:

6.2 General Syntax of tnsnames.ora

The basic syntax for a tnsnames.ora file is shown in Example 6-1.

Example 6-1 Basic Format of tnsnames.ora File

net_service_name= 
 (DESCRIPTION= 
   (ADDRESS=(protocol_address_information))
   (CONNECT_DATA= 
     (SERVICE_NAME=service_name))) 

In the preceding example, DESCRIPTION contains the connect descriptor, ADDRESS contains the protocol address, and CONNECT_DATA contains the database service identification information.

6.3 Multiple Descriptions in tnsnames.ora

A tnsnames.ora file can contain net service names with one or more connect descriptors. Each connect descriptor can contain one or more protocol addresses. Example 6-2 shows two connect descriptors with multiple addresses. DESCRIPTION_LIST defines a list of connect descriptors.

Example 6-2 Net Service Name with Multiple Connect Descriptors in tnsnames.ora

net_service_name= 
 (DESCRIPTION_LIST=
  (DESCRIPTION= 
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521))
   (CONNECT_DATA=
     (SERVICE_NAME=sales.us.example.com)))
  (DESCRIPTION= 
   (ADDRESS=(PROTOCOL=tcp)(HOST=hr1-svr)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=hr2-svr)(PORT=1521))
   (CONNECT_DATA=
     (SERVICE_NAME=hr.us.example.com))))

Note:

Oracle Net Manager does not support the creation of multiple connect descriptors for a net service name when using Oracle Connection Manager.

6.4 Multiple Address Lists in tnsnames.ora

The tnsnames.ora file also supports connect descriptors with multiple lists of addresses, each with its own characteristics. In Example 6-3, two address lists are presented. The first address list features client load balancing and no connect-time failover, affecting only those protocol addresses within its ADDRESS_LIST. The second protocol address list features no client load loading balancing, but does have connect-time failover, affecting only those protocol addresses within its ADDRESS_LIST. The client first tries the first or second protocol address at random, then tries protocol addresses three and four sequentially.

Example 6-3 Multiple Address Lists in tnsnames.ora

net_service_name= 
 (DESCRIPTION= 
  (ADDRESS_LIST= 
   (LOAD_BALANCE=on)
   (FAILOVER=off)
   (ADDRESS=(protocol_address_information))
   (ADDRESS=(protocol_address_information)))
  (ADDRESS_LIST= 
   (LOAD_BALANCE=off)
   (FAILOVER=on)
   (ADDRESS=(protocol_address_information))
   (ADDRESS=(protocol_address_information)))
  (CONNECT_DATA=
   (SERVICE_NAME=service_name)))

Note:

  • Oracle Net Manager supports only the creation of one protocol address list for a connect descriptor.

  • Oracle Net Services supports the IFILE parameter in the tnsnames.ora file, with up to three levels of nesting. The parameter is added manually to the file. The following is an example of the syntax:

    IFILE=/tmp/listener_em.ora
    IFILE=/tmp/listener_cust1.ora
    IFILE=/tmp/listener_cust2.ora 
    

    Refer to Oracle Database Reference for additional information.

6.5 Connect-Time Failover and Client Load Balancing with Oracle Connection Managers

When a connect descriptor in a tnsnames.ora file contains at least two protocol addresses for Oracle Connection Manager, parameters for connect-time failover and load balancing can be included in the file.

Example 6-4 Multiple Oracle Connection Manager Addresses in tnsnames.ora

This example illustrates failover of multiple Oracle Connection Manager protocol addresses.

sample1=
 (DESCRIPTION= 
   (SOURCE_ROUTE=yes) 
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=host1)(PORT=1630))    # 1 
     (ADDRESS_LIST=  
       (FAILOVER=on) 
       (LOAD_BALANCE=off)                               #  2 
       (ADDRESS=(PROTOCOL=tcp)(HOST=host2a)(PORT=1630)) 
       (ADDRESS=(PROTOCOL=tcp)(HOST=host2b)(PORT=1630)))
     (ADDRESS=(PROTOCOL=tcp)(HOST=host3)(PORT=1521)))    #  3
   (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)))

Here, the syntax does the following:

  1. The client is instructed to connect to the protocol address of the first Oracle Connection Manager, as indicated by:

    (ADDRESS=(PROTOCOL=tcp)(HOST=host1)(PORT=1630))
  2. The first Oracle Connection Manager is instructed to connect to the first protocol address of another Oracle Connection Manager. If the first protocol address fails, then it tries the second protocol address. This sequence is specified with the following configuration:

    (ADDRESS_LIST=  
      (FAILOVER=on) 
      (LOAD_BALANCE=off)
      (ADDRESS=(PROTOCOL=tcp)(HOST=host2a)(PORT=1630)) 
      (ADDRESS=(PROTOCOL=tcp)(HOST=host2b)(PORT=1630))) 
    
  3. Oracle Connection Manager connects to the database service using the following protocol address:

    (ADDRESS=(PROTOCOL=tcp)(HOST=host3)(PORT=1521))

Example 6-5 Client Load Balancing in tnsnames.ora

This example illustrates client load balancing among two Oracle Connection Managers and two protocol addresses:

sample2=
 (DESCRIPTION= 
   (LOAD_BALANCE=on)                                    # 1
   (FAILOVER=on)
   (ADDRESS_LIST= 
     (SOURCE_ROUTE=yes) 
     (ADDRESS=(PROTOCOL=tcp)(HOST=host1)(PORT=1630))    # 2
     (ADDRESS=(PROTOCOL=tcp)(HOST=host2)(PORT=1521)))
  (ADDRESS_LIST= 
     (SOURCE_ROUTE=yes) 
     (ADDRESS=(PROTOCOL=tcp)(HOST=host3)(port=1630)) 
     (ADDRESS=(PROTOCOL=tcp)(HOST=host4)(port=1521)))
   (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)))  # 3

Here, the syntax does the following:

  1. The client is instructed to pick an ADDRESS_LIST at random and to fail over to the other if the chosen ADDRESS_LIST fails. This is indicated by the LOAD_BALANCE and FAILOVER parameters being set to on.

  2. When an ADDRESS_LIST is chosen, the client first connects to Oracle Connection Manager, using the Oracle Connection Manager protocol address that uses port 1630 indicated for the ADDRESS_LIST.

  3. Oracle Connection Manager then connects to the database service, using the protocol address indicated for the ADDRESS_LIST.

6.6 Connect Descriptor Descriptions

Each connect descriptor is contained within the DESCRIPTION parameter. Multiple connect descriptors are characterized by the DESCRIPTION_LIST parameter.

6.6.1 DESCRIPTION_LIST

DESCRIPTION_LIST networking parameter of the tnsnames.ora file defines a list of connect descriptors for a particular net service name.

Purpose

To define a list of connect descriptors for a particular net service name.

Example 6-6 Example

net_service_name= 
(DESCRIPTION_LIST=
 (DESCRIPTION=
  (ADDRESS=...)
  (CONNECT_DATA=(SERVICE_NAME=sales.example.com)))
 (DESCRIPTION=

6.6.2 DESCRIPTION

DESCRIPTION networking parameter of the tnsnames.ora file specifies a container for a connect descriptor.

Purpose

To specify a container for a connect descriptor.

Usage Notes

When using more than one DESCRIPTION parameter, put the parameters under the DESCRIPTION_LIST parameter.

Example 6-7 Example

net_service_name=
(DESCRIPTION=
  (ADDRESS=...)
  (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)))

6.7 Protocol Address Section

The protocol address section of the tnsnames.ora file specifies the protocol addresses of the listener. If there is only one listener protocol address, then use the ADDRESS parameter. If there is more than one address, then use the ADDRESS_LIST parameter.

6.7.1 ADDRESS

The ADDRESS networking parameter is in the tnsnames.ora file and it specifies the protocol address under the ADDRESS_LIST or the DESCRIPTION parameter for one listener.

Purpose

To specify a single listener protocol address.

Usage Notes

Put this parameter under either the ADDRESS_LIST parameter or the DESCRIPTION parameter.

Example

net_service_name=
(DESCRIPTION= 
 (ADDRESS=(PROTOCOL=tcp)(HOST=sales-svr)(PORT=1521))
 (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com))

6.7.2 HTTPS_PROXY

Purpose

To specify HTTP proxy host name for tunneling SSL client connections.

Usage Notes

The clients can tunnel secure connections over forward HTTP proxy using HTTP CONNECT method. This helps in accessing the public cloud database service as it eliminates the requirement to open an outbound port on a client side firewall. This parameter is applicable only to the connect descriptors where PROTOCOL=TCPS. This is similar to the web browser setting for intranet users who want to connect to internet hosts. Increase the forward web proxy read timeout for requests to a higher value depending on client queries. Otherwise, the forward web proxy closes the connection assuming that no requests are made from the client.

Successful connection depends on specific proxy configurations. The performance of data transfers depends on proxy capacity. Oracle recommends not to use this feature in production environments where performance is critical.

Configuring tnsnames.ora for the HTTP proxy may not be enough depending your organization’s network configuration and security policies. For example, some networks require a username and password for the HTTP proxy.

Oracle Client versions earlier than 18c does not support connections through HTTP proxy.

Contact your network administrator to open outbound connections to hosts in the oraclecloud.com domain using the relevant port, without going through an HTTP proxy. For example, port 1522.

Default

None

Values

HTTP proxy host name that can make an outbound connection to the internet hosts.

Example

HTTPS_PROXY=www-proxy.mycompany.com

6.7.3 HTTPS_PROXY_PORT

Purpose

To specify forward HTTP proxy host port for tunneling SSL client connections.

Usage Notes

It forwards the HTTP proxy host port that receives HTTP CONNECT method. This parameter should be used along with HTTPS_PROXY_PORT. This value takes effect only when SQLNET.USE_HTTPS_PROXY=1 is set in sqlnet.ora.

Default

none

Values

port number

Example

HTTPS_PROXY_PORT=80

6.7.4 ADDRESS_LIST

The ADDRESS_LIST networking parameter specifies the number of protocol addresses.

Purpose

To define a list of protocol addresses.

Usage Notes

If there is only one listener protocol address, then ADDRESS_LIST is not necessary.

Put this parameter either under the DESCRIPTION parameter or the DESCRIPTION_LIST parameter.

Example

net_service_name=
 (DESCRIPTION= 
  (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521)))
  (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)))

6.8 Optional Parameters for Address Lists

For multiple addresses, you can use the optional parameters to configure address lists.

6.8.1 ENABLE

Purpose

To allow the caller to detect a terminated remote server, typically it takes 2 hours or more to notice.

Usage Notes

The keepalive feature on the supported TCP transports can be enabled for a net service client by putting (ENABLE=broken) under the DESCRIPTION parameter in the connect string. On the client side, the default for tcp_keepalive is off. Operating system TCP configurables, which vary by platform, define the actual keepalive timing details.

Values

broken

Example

net_service_name=
 (DESCRIPTION= 
  (ENABLE=broken)
  (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
  (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521)))
  (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com))

Although the preceding example has multiple addresses, the ADDRESS_LIST parameter was not used. This is because the ADDRESS_LIST parameter is not mandatory.

6.8.2 FAILOVER

Purpose

To enable or disable connect-time failover for multiple protocol addresses.

Usage Notes

When you set the parameter to on, yes, or true, Oracle Net fails over at connect time to a different address if the first protocol address fails. When you set the parameter to off, no, or false, Oracle Net tries one protocol address.

Put this parameter under the DESCRIPTION_LIST parameter, the DESCRIPTION parameter, or the ADDRESS_LIST parameter.

Note:

Do not set the GLOBAL_DBNAME parameter in the SID_LIST_listener_name section of the listener.ora. A statically configured global database name disables connect-time failover.

Default

on for the DESCRIPTION_LIST, DESCRIPTION, and ADDRESS_LIST parameters

Values

  • yes | on | true

  • no | off | false

Example

net_service_name=
 (DESCRIPTION= 
  (FAILOVER=on)
  (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521)))
  (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)))

6.8.3 LOAD_BALANCE

Purpose

To enable or disable client load balancing for multiple protocol addresses.

Usage Notes

When you set the parameter to on, yes, or true, Oracle Net goes through the list of addresses in a random sequence, balancing the load on the various listener or Oracle Connection Manager protocol addresses. When you set the parameter to off, no, or false, Oracle Net tries the protocol addresses sequentially until one succeeds.

Put this parameter under the DESCRIPTION_LIST parameter, the DESCRIPTION parameter, or the ADDRESS_LIST parameter.

Default

on for DESCRIPTION_LIST

Values

  • yes | on | true

  • no | off | false

Example

net_service_name=
 (DESCRIPTION= 
  (LOAD_BALANCE=on)
  (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521)))
  (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com))

6.8.4 RECV_BUF_SIZE

Purpose

To specify, in bytes, the buffer space for receive operations of sessions.

Usage Notes

This parameter is supported by the TCP/IP, TCP/IP with SSL, and SDP protocols.

Put this parameter under the DESCRIPTION parameter or at the end of the protocol address.

Setting this parameter in the connect descriptor for a client overrides the RECV_BUF_SIZE parameter at the client-side sqlnet.ora file.

Note:

Additional protocols might support this parameter on certain operating systems. Refer to the operating system-specific documentation for additional information about additional protocols.

Default

The default value for this parameter is specific to the operating system. The default for the Linux 2.6 operating system is 87380 bytes.

Example

net_service_name= 
 (DESCRIPTION= 
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-server)(PORT=1521)
        (RECV_BUF_SIZE=11784))
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-server)(PORT=1521)
        (RECV_BUF_SIZE=11784))
   (CONNECT_DATA=
     (SERVICE_NAME=sales.us.example.com)))
net_service_name= 
 (DESCRIPTION= 
   (RECV_BUF_SIZE=11784)
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=hr1-server)(PORT=1521))
     (ADDRESS=(PROTOCOL=tcp)(HOST=hr2-server)(PORT=1521)))
   (CONNECT_DATA=
     (SERVICE_NAME=hr.us.example.com)))

See Also:

Oracle Database Net Services Administrator's Guide for additional information about configuring this parameter

6.8.5 SDU

Purpose

To instruct Oracle Net to optimize the transfer rate of data packets being sent across the network with a specified session data unit (SDU) size.

Usage Notes

Put this parameter under the DESCRIPTION parameter.

Setting this parameter in the connect descriptor for a client overrides the DEFAULT_SDU_SIZE parameter at client-side sqlnet.ora file.

Default

8192 bytes (8 KB)

Values

512 to 2097152 bytes.

Example

net_service_name= 
 (DESCRIPTION=
  (SDU=8192)
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-server)(PORT=1521))
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-server)(PORT=1521)))
  (CONNECT_DATA=
    (SERVICE_NAME=sales.us.example.com))

6.8.6 SEND_BUF_SIZE

Purpose

To specify, in bytes, the buffer space for send operations of sessions.

Usage Notes

This parameter is supported by the TCP/IP, TCP/IP with SSL, and SDP protocols.

Put this parameter under the DESCRIPTION parameter or at the end of the protocol address.

Setting this parameter in the connect descriptor for a client overrides the SEND_BUF_SIZE parameter at the client-side sqlnet.ora file.

Note:

Additional protocols might support this parameter on certain operating systems. Refer to the operating system-specific documentation for information about additional protocols.

Default

The default value for this parameter is operating system specific. The default for the Linux 2.6 operating system is 16 KB.

Example

net_service_name= 
 (DESCRIPTION= 
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-server)(PORT=1521)
        (SEND_BUF_SIZE=11784))
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-server)(PORT=1521)
        (SEND_BUF_SIZE=11784)))
   (CONNECT_DATA=
     (SERVICE_NAME=sales.us.example.com)))
net_service_name= 
 (DESCRIPTION= 
   (SEND_BUF_SIZE=11784)
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=hr1-server)(PORT=1521)
     (ADDRESS=(PROTOCOL=tcp)(HOST=hr2-server)(PORT=1521)))
   (CONNECT_DATA=
     (SERVICE_NAME=hr.us.example.com)))

See Also:

Oracle Database Net Services Administrator's Guide for additional information about configuring this parameter

6.8.7 SOURCE_ROUTE

Purpose

To enable routing through multiple protocol addresses.

Usage Notes

When you set this parameter to on or yes, Oracle Net uses each address in order until the destination is reached.

To use Oracle Connection Manager, an initial connection from the client to Oracle Connection Manager is required, and a second connection from Oracle Connection Manager to the listener is required.

Put this parameter under either the DESCRIPTION_LIST parameter, the DESCRIPTION parameter, or the ADDRESS_LIST parameter.

Default

off

Values

  • yes | on

  • no | off

Example

net_service_name=
 (DESCRIPTION= 
  (SOURCE_ROUTE=on)
  (ADDRESS=(PROTOCOL=tcp)(HOST=cman-pc)(PORT=1630))
  (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
  (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com))

See Also:

Oracle Database Net Services Administrator's Guide for complete configuration information

6.8.8 TYPE_OF_SERVICE

Purpose

To specify the type of service to use for an Oracle Rdb database.

Usage Notes

This parameter should only be used if the application supports both an Oracle Rdb and Oracle database service, and you want the application to load balance between the two.

Put this parameter under the DESCRIPTION parameter.

Example

net_service_name=
 (DESCRIPTION_LIST=
  (DESCRIPTION=
   (ADDRESS=...)
   (CONNECT_DATA= 
    (SERVICE_NAME=generic)
    (RDB_DATABASE=[.mf]mf_personal.rdb)
    (GLOBAL_NAME=alpha5))
   (TYPE_OF_SERVICE=rdb_database))
  (DESCRIPTION=
   (ADDRESS=...)
   (CONNECT_DATA=
    (SERVICE_NAME=sales.us.example.com))
   (TYPE_OF_SERVICE=oracle11_database)))

6.9 Connection Data Section

Learn how to configure network connections with protocol addresses.

A network object is identified by a protocol address. When a connection is made, the client and the receiver of the request (listener or Oracle Connection Manager) are configured with identical protocol addresses. The client uses this address to send the connection request to a particular network object location, and the recipient "listens" for requests on this address, and grants a connection based on its address information matching the client information.

6.9.1 CONNECT_DATA

Purpose

To define the service to which to connect, such as SERVICE_NAME.

Usage Notes

Put this parameter under the DESCRIPTION parameter.

CONNECT_DATA permits the following additional parameters:

Example

net_service_name=
 (DESCRIPTION= 
  (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521)))
  (CONNECT_DATA=
    (SERVICE_NAME=sales.us.example.com)))

6.9.2 FAILOVER_MODE

Purpose

To instruct Oracle Net to fail over to a different listener if the first listener fails during run time.

Usage Notes

Depending upon the configuration, the session or any SELECT statements which were in progress are automatically failed over.

This type of failover is called Transparent Application Failover (TAF) and should not be confused with the connect-time failover FAILOVER parameter.

Put this parameter under the CONNECT_DATA parameter.

Additional Parameters

FAILOVER_MODE supports the following parameters:

  • BACKUP: Specifies the failover node by its net service name. A separate net service name must be created for the failover node.

  • TYPE: Specifies the type of failover. Three types of Oracle Net failover functionality are available by default to Oracle Call Interface (OCI) applications:

    • SESSION: Fails over the session. For example, if a user's connection is lost, then a new session is automatically created for the user on the backup. This type of failover does not attempt to recover selects.

    • SELECT: Allows users with open cursors to continue fetching them after failure. However, this mode involves overhead on the client side in normal select operations.

    • NONE: This is the default, in which no failover functionality is used. This can also be explicitly specified to prevent failover from happening.

  • METHOD: Specifies how fast failover is to occur from the primary node to the backup node:

    • BASIC: Establishes connections at failover time. This option requires almost no work on the backup database server until failover time.

    • PRECONNECT: Pre-establishes connections. This provides faster failover but requires that the backup instance be able to support all connections from every supported instance.

  • TRANSACTION: Allows the database to complete the current database transaction following a recoverable error. This parameter is used with the COMMIT_OUTCOME=TRUE parameter.

  • RETRIES: Specifies the number of times to attempt to connect after a failover. If DELAY is specified, then RETRIES defaults to five retry attempts.

  • DELAY: Specifies the amount of time in seconds to wait between connect attempts. If RETRIES is specified, then DELAY defaults to one second.

Note:

If a callback function is registered, then RETRIES and DELAY parameters are ignored.

See Also:

Oracle Database Net Services Administrator's Guide for additional configuration information

6.9.3 GLOBAL_NAME

Purpose

To identify the Oracle Rdb database.

Usage Notes

Put this parameter under the CONNECT_DATA parameter.

Example

net_service_name= 
 (DESCRIPTION= 
   (ADDRESS_LIST=
    (ADDRESS=...)
    (ADDRESS=...))
   (CONNECT_DATA=
    (SERVICE_NAME=generic)
    (RDB_DATABASE=[.mf]mf_personal.rdb)
    (GLOBAL_NAME=alpha5)))

6.9.4 HS

Purpose

To direct Oracle Net to connect to a non-Oracle system through Heterogeneous Services.

Usage Notes

Put this parameter under the CONNECT_DATA parameter.

Default

None

Values

ok

Example

net_service_name= 
 (DESCRIPTION=
   (ADDRESS_LIST=
     (ADDRESS=...)
     (ADDRESS=...))
   (CONNECT_DATA=
    (SID=sales6)
    )
(HS=ok))

See Also:

Oracle Database Net Services Administrator's Guide for complete configuration information

6.9.5 INSTANCE_NAME

Purpose

To identify the database instance to access.

Usage Notes

Set the value to the value specified by the INSTANCE_NAME parameter in the initialization parameter file.

Put this parameter under the CONNECT_DATA parameter.

Example

net_service_name= 
 (DESCRIPTION=
   (ADDRESS_LIST=
     (ADDRESS=...)
     (ADDRESS=...))
   (CONNECT_DATA=
     (SERVICE_NAME=sales.us.example.com)
     (INSTANCE_NAME=sales1)))

See Also:

Oracle Database Net Services Administrator's Guide for additional information about the use of INSTANCE_NAME

6.9.6 RDB_DATABASE

Purpose

To specify the file name of an Oracle Rdb database.

Usage Notes

Put this parameter under the CONNECT_DATA parameter.

Example

net_service_name= 
 (DESCRIPTION= 
   (ADDRESS_LIST=
     (ADDRESS=...)
     (ADDRESS=...))
   (CONNECT_DATA=
     (SERVICE_NAME=sales.us.example.com)
     (RDB_DATABASE= [.mf]mf_personal.rdb)))

6.9.7 SHARDING_KEY

Use this parameter to route the database request to a particular shard.

Usage Notes

Put this parameter under the CONNECT_DATA parameter.

Example 6-8

net_service_name
(DESCRIPTION= 
   (ADDRESS_LIST=
     (ADDRESS=...)
     (ADDRESS=...))
   (CONNECT_DATA=
     (SERVICE_NAME=sales.us.example.com)
     ((SHARDING_KEY=40598230))))

Note:

Use the SHARDING_KEY parameter for sharding values in simplified text format. This parameter does not support special characters. Use the SHARDING_KEY_B64 parameter for base64 encoded binary representation of shard key. The indicator for base64 format is a '+' sign prepended to the shard key value.

6.9.8 SUPER_SHARDING_KEY

Use this parameter to route the database request to a collection of shards.

Usage Notes

Put this parameter under the CONNECT_DATA parameter.

Example 6-9

net_service_name=
(DESCRIPTION= 
   (ADDRESS_LIST=
     (ADDRESS=...)
     (ADDRESS=...))
   (CONNECT_DATA=
     (SERVICE_NAME=sales.us.example.com)
     ((SHARDING_KEY=40598230)(SUPER_SHARDING_KEY=gold)))

Note:

Use the SUPER_SHARDING_KEY parameter for specifying group key values in simplified text format. This parameter does not support special characters. Use the SUPER_SHARDING_KEY_B64 parameter for base64 encoded binary representation of group key. The indicator for base64 format is a '+' sign prepended to the shard key value.

6.9.9 SERVER

Purpose

To direct the listener to connect the client to a specific type of service handler.

Usage Notes

Put this parameter under the CONNECT_DATA parameter.

Values

  • dedicated to specify whether client requests be served by dedicated server.

  • shared to specify whether client requests be served by a dispatcher or shared server.

  • pooled to get a connection from the connection pool if database resident connection pooling is enabled on the server.

Note:

  • Shared server must be configured in the database initialization file in order for the client to connect to the database with a shared server process.

  • The USE_DEDICATED_SERVER parameter in the sqlnet.ora file overrides this parameter.

Example

net_service_name= 
 (DESCRIPTION=
   (ADDRESS_LIST=
     (ADDRESS=...)
     (ADDRESS=...))
   (CONNECT_DATA=
    (SERVICE_NAME=sales.us.example.com)
    (SERVER=dedicated)))

6.9.10 SERVICE_NAME

Purpose

To identify the Oracle Database database service to access.

Usage Notes

Set the value to a value specified by the SERVICE_NAMES parameter in the initialization parameter file.

Put this parameter under the CONNECT_DATA parameter.

Example

net_service_name= 
 (DESCRIPTION=
   (ADDRESS_LIST=
     (ADDRESS=...)
     (ADDRESS=...))
   (CONNECT_DATA=
     (SERVICE_NAME=sales.us.example.com)))

6.9.11 COLOCATION_TAG

Purpose

To direct the listener to route all connections with the same colocation_tag to the same database instance.

Usage Notes

Use this parameter with the CONNECT_DATA parameter.

The parameter value must be an alphanumeric string.

Example


net_service_name=
 (DESCRIPTION=
   (ADDRESS_LIST=
    (ADDRESS=...)
    (ADDRESS=...))
 (CONNECT_DATA=
    (SERVICE_NAME=sales.us.example.com)
    (COLOCATION_TAG=abc)))

Note:

Under certain conditions, such as, when maximum load of an instance is reached or when new instances are added or deleted for a service, the colocation of client connections that have the same colocation_tag to the same database instance may not be consistent.

6.9.12 KERBEROS5_PRINCIPAL

Use this parameter to specify Kerberos principals.

Purpose

When you configure Kerberos authentication for an Oracle Database client, you can specify multiple Kerberos principals with a single Oracle Database client.

This is an optional parameter. When specified, it is used to verify if the principal name in the credential cache matches the parameter value.

Usage Notes

Use this parameter with the CONNECT_DATA parameter. Alternatively, you can specify KERBEROS5_CC_NAME in the connect string along with the optional KERBEROS5_PRINCIPAL parameter to connect as a different Kerberos principal. Each Kerberos principal must have a valid credential cache.

Example

For a user krbuser1, who is externally authenticated using the Kerberos principal krbprinc1.example.com and the credential cache for this principal is located at /tmp/krbuser1/krb.cc, the connect string is:

net_service_name=
(DESCRIPTION=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-svr)(PORT=1521))
      (CONNECT_DATA=(SERVICE_NAME=sales.example.com)) 
      (SECURITY=
          (KERBEROS5_CC_NAME=/tmp/krbuser1/krb.cc)
          (KERBEROS5_PRINCIPAL=krbprinc1@example.com)))

Note:

The connection fails if the principal in the /tmp/krbuser1/krb.cc file does not contain the krbprinc1@example.com value.
Similarly, for a user krbuser2, who is externally authenticated using the Kerberos principal krbprinc2.example.com and the credential cache for this principal is located at /tmp/krbuser2/krb.cc, the connect string is:

net_service_name=
(DESCRIPTION=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-svr)(PORT=1521))
      (CONNECT_DATA=(SERVICE_NAME=sales.example.com)) 
      (SECURITY=
          (KERBEROS5_CC_NAME=/tmp/krbuser2/krb.cc)
          (KERBEROS5_PRINCIPAL=krbprinc2@example.com)))

6.10 Security Section

The security section of the tnsnames.ora file specifies the following security-related parameters for use with Oracle security features:

6.10.1 SECURITY

Purpose

To change the security properties of the connection. Put this parameter under the DESCRIPTION parameter.

Usage Notes

The parameters permitted under SECURITY are SSL_SERVER_CERT_DN and AUTHENTICATION_SERVICE.

Example

net_service_name=
 (DESCRIPTION= 
  (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521)))
  (CONNECT_DATA=
    (SERVICE_NAME=sales.us.example.com))
    (SECURITY=
      (SSL_SERVER_CERT_DN="cn=sales,cn=OracleContext,dc=us,dc=acme,dc=com")))

6.10.2 SSL_SERVER_CERT_DN

Purpose

To specify the distinguished name (DN) of the database server.

Usage Notes

The server DN must be known by the client ahead of time. Otherwise, the client cannot specify the server's DN in SSL_SERVER_CERT_DN. The client uses this information to obtain the list of DNs it expects for each of the servers, enforcing the database server DN to match its service name. This parameter must be set to the server DN (for example, SSL_SERVER_CERT_DN="finance, cn=OracleContext,c=us,o=example") to use full DN matching. For partial DN matching, do not include this parameter.

Use this parameter with the sqlnet.ora parameter SSL_SERVER_DN_MATCH to enable full DN matching.

Example

finance= 
 (DESCRIPTION=
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL = tcps) (HOST = finance)
     (PORT = 1575)))
   (CONNECT_DATA=
     (SERVICE_NAME=finance.us.example.com))
   (SECURITY=
     (SSL_SERVER_CERT_DN="cn=finance,cn=OracleContext,c=us,o=example")))

6.10.3 IGNORE_ANO_ENCRYPTION_FOR_TCPS

The IGNORE_ANO_ENCRYPTION_FOR_TCPS parameter specifies if the SQLNET.ENCRYPTION_CLIENT parameter should be ignored for this specific TNS alias.

Purpose

To specify if the SQLNET.ENCRYPTION_CLIENT parameter should be ignored for this specific TNS alias.

Usage Notes

If your requirements are that SQLNET.ENCRYPTION_SERVER be set to required, then you can set the IGNORE_ANO_ENCRYPTION_FOR_TCPS parameter in both SQLNET.ENCRYPTION_CLIENT and SQLNET.ENCRYPTION_SERVER to TRUE. This forces the client to ignore the value that is set for the SQLNET.ENCRYPTION_CLIENT parameter for all outgoing TCPS connections.

Default

FALSE

Example 6-10 Example

test_ssl=
    (DESCRIPTION =
       (ADDRESS=(PROTOCOL=tcps)(HOST=)(PORT=1750))
       (CONNECT_DATA=(SID=^ORACLE_SID^))
       (SECURITY=(IGNORE_ANO_ENCRYPTION_FOR_TCPS=TRUE))
     ) 

6.11 Timeout Parameters

The timeout section of the tnsnames.ora file provides the ability to specify timeout and retry configuration through the TNS connect string.

The following parameters can be set at the DESCRIPTION level of a connect string:

6.11.1 CONNECT_TIMEOUT

Purpose

To specify the timeout duration in ms, sec, or min for a client to establish an Oracle Net connection to an Oracle database.

Usage Notes

Put this parameter under the DESCRIPTION parameter.

The timeout interval specified by CONNECT_TIMEOUT is a superset of the TCP connect timeout interval. It includes the time to be connected to the database instance providing the requested service, not just the duration of the TCP connection. It accepts different timeouts with or without space between the value and the unit. In case, no unit is mentioned, the default unit is sec.

The timeout interval is applicable for each ADDRESS in an ADDRESS_LIST, and each IP address to which a host name is mapped.

The CONNECT_TIMEOUT parameter is equivalent to the sqlnet.ora parameter SQLNET.OUTBOUND_CONNECT_TIMEOUT, and overrides it.

Example

net_service_name=
 (DESCRIPTION= 
  (CONNECT_TIMEOUT=10 ms)(RETRY_COUNT=3)
  (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521)))
  (CONNECT_DATA=
   (SERVICE_NAME=sales.us.example.com)))

6.11.2 RETRY_COUNT

Purpose

To specify the number of times an ADDRESS list is traversed before the connection attempt is terminated.

Usage Notes

Put this parameter under the DESCRIPTION parameter.

When a DESCRIPTION_LIST is specified, each DESCRIPTION is traversed multiple times based on the specified number of retries.

Example

net_service_name= 
(DESCRIPTION_LIST=
 (DESCRIPTION=
  (CONNECT_TIMEOUT=10)(RETRY_COUNT=3)
  (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales1a-svr)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales1b-svr)(PORT=1521)))
  (CONNECT_DATA=(SERVICE_NAME=sales1.example.com)))
 (DESCRIPTION=
  (CONNECT_TIMEOUT=60)(RETRY_COUNT=1)
  (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales2a-svr)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales2b-svr)(PORT=1521)))
  (CONNECT_DATA=(SERVICE_NAME=sales2.us.example.com))))

6.11.3 RETRY_DELAY

Purpose

To specify the delay in seconds between subsequent retries for a connection. This parameter works in conjunction with RETRY_COUNT parameter.

Usage Notes

Put this parameter under the DESCRIPTION parameter.

When a DESCRIPTION_LIST is specified, each DESCRIPTION is traversed multiple times based on the specified number of retries, and the specific delay for the description.

Example

net_service_name= 
(DESCRIPTION_LIST=
 (DESCRIPTION=
  (CONNECT_TIMEOUT=10)(RETRY_COUNT=3)(RETRY_DELAY=2)
  (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales1a-svr)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales1b-svr)(PORT=1521)))
  (CONNECT_DATA=(SERVICE_NAME=sales1.example.com)))
 (DESCRIPTION=
  (CONNECT_TIMEOUT=60)(RETRY_COUNT=2)(RETRY_DELAY=1)
  (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales2a-svr)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales2b-svr)(PORT=1521)))
  (CONNECT_DATA=(SERVICE_NAME=sales2.us.example.com))))

6.11.4 TRANSPORT_CONNECT_TIMEOUT

Purpose

To specify the transport connect timeout duration in ms, sec, or min for a client to establish an Oracle Net connection to an Oracle database.

Usage Notes

This parameter is put under the DESCRIPTION parameter.

The TRANSPORT_CONNECT_TIMEOUT parameter specifies the time, in ms, sec, or min, for a client to establish a TCP connection to the database server. It accepts different timeouts with or without space between the value and the unit. The default value is 60 seconds. In case, no unit is mentioned, the default unit is sec.

The timeout interval is applicable for each ADDRESS in an ADDRESS_LIST description, and each IP address that a host name is mapped. The TRANSPORT_CONNECT_TIMEOUT parameter is equivalent to the sqlnet.ora parameter TCP.CONNECT_TIMEOUT, and overrides it.

Example

net_service_name =
  (DESCRIPTION=
    (TRANSPORT_CONNECT_TIMEOUT=10 ms)
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-svr)(PORT=1521))
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-svr)(PORT=1521)))
    (CONNECT_DATA=
      (SERVICE_NAME=sales.us.example.com)))

6.11.5 RECV_TIMEOUT

Use the tnsnames.ora parameter RECV_TIMEOUT to specify the duration of time that a database client or server should wait for data from a peer after establishing a connection.

Purpose

To specify the time, in ms, sec, or min, for a database client or server to wait for data from the peer after establishing a connection. The peer must send data within the time interval that you specify.

Usage Notes

This parameter is put under the DESCRIPTION parameter.

Setting this parameter for clients ensures that receive operations are not left in a wait state indefinitely or for a long period due to either server host being down or server busy state or network connectivity. If a client does not receive response data in the time specified, then the client logs ORA-12535: TNS:operation timed out and ORA-12609: TNS: Receive timeout occurred messages to the sqlnet.log file.

Default

None

Example

RECV_TIMEOUT=10ms

See Also:

Oracle Database Net Services Administrator's Guide for additional information about configuring these parameters

or

RECV_TIMEOUT=10 ms

6.12 Compression Parameters

The compression section of the tnsnames.ora file provides the ability to enable compression and specify compression levels. These parameters can be set at the DESCRIPTION level of a connect string.

6.12.1 COMPRESSION

The tnsnames.ora file’s compression parameter enables or disables the data compression.

Purpose

To enable or disable data compression.

Usage Notes

Put this parameter under the DESCRIPTION parameter.

Setting this parameter in the connect descriptor for a client overrides the SQLNET.COMPRESSION parameter in the client-side sqlnet.ora file.

Default

off

Values

  • on to enable data compression.

  • off to disable data compression.

Example

net_service_name=
 (DESCRIPTION=
   (COMPRESSION=on)
      (ADDRESS_LIST=
         (ADDRESS= (PROTOCOL=tcp) (HOST=sales1-server) (PORT=1521))
         (ADDRESS= (PROTOCOL=tcp) (HOST=sales2-server) (PORT=1521)))
   (CONNECT_DATA=
       (SERVICE_NAME=sales.us.example.com)))

Related Topics

6.12.2 COMPRESSION_LEVELS

The COMPRESSION_LEVELS parameter of the tnsnames.ora file specifies the compression level.

Purpose

To specify the compression level.

Usage Notes

The compression levels are used at the time of negotiation to verify which levels are used at both ends, and select one level. Put this parameter under the DESCRIPTION parameter.

This parameter is used with the COMPRESSION parameter. Setting this parameter in the connect descriptor for a client overrides the SQLNET.COMPRESSION_LEVELS parameter in the client-side sqlnet.ora file.

Default

low

Values

  • low for low CPU usage and a low compression ratio.

  • high for high CPU usage and a high compression ratio.

Example

net_service_name=
 (DESCRIPTION=
  (COMPRESSION=on)
  (COMPRESSION_LEVELS=(LEVEL=low)(LEVEL=high))
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales1-server)(PORT=1521))
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales2-server)(PORT=1521)))
  (CONNECT_DATA=
    (SERVICE_NAME=sales.us.example.com)))

Related Topics