Replaying a Database Workload

12 Replaying a Database Workload

After a captured workload is preprocessed, it can be replayed repeatedly on a replay system that is running the same version of Oracle Database. Typically, the replay system where the preprocessed workload will be replayed should be a test system that is separate from the production system.

This chapter describes how to replay a database workload on the test system and contains the following sections:

Tip:

Before you can replay a database workload, you must first:

Capture the workload on the production system, as described in Capturing a Database Workload
Preprocess the captured workload, as described in Preprocessing a Database Workload

12.1 Steps for Replaying a Database Workload

Proper preparation of the replay system and planning of the workload replay ensures that the replay will be accurate. Before replaying a database workload, complete the following steps to prepare the replay system and the workload replay:

12.1.1 Setting Up the Replay Directory

The captured workload must have been preprocessed and copied to the replay system. A directory object for the directory to which the preprocessed workload is copied must exist in the replay system.

12.1.2 Restoring the Database

Before a workload can be replayed, the application data state on the replay system should be logically equivalent to that of the capture system at the start time of workload capture. This minimizes replay divergence during replay. The method for restoring the database depends on the backup method that was used before capturing the workload. For example, if RMAN was used to back up the capture system, you can use RMAN DUPLICATE capabilities to create the test database. For more information, see "Prerequisites for Capturing a Database Workload".

After the database is created with the appropriate application data on the replay system, perform the system change you want to test, such as a database or operating system upgrade. The primary purpose of Database Replay is to test the effect of system changes on a captured workload. Therefore, the system changes you make should define the test you are conducting with the captured workload.

12.1.3 Resolving References to External Systems

A captured workload may contain references to external systems, such as database links or external tables. Typically, you should reconfigure these external interactions to avoid impacting other production systems during replay. External references that need to be resolved before replaying a workload include:

Database links

It is typically not desirable for the replay system to interact with other databases. Therefore, you should reconfigure all database links to point to an appropriate database that contains the data needed for replay.
External tables

All external files specified using directory objects referenced by external tables need to be available to the database during replay. The content of these files should be the same as during capture, and the filenames and directory objects used to define the external tables should also be valid.
Directory objects

You should reconfigure any references to directories on the production system by appropriately redefining the directory objects present in the replay system after restoring the database.
URLs

URLs/URIs that are stored in the database need to be configured so that Web services accessed during the workload capture will point to the proper URLs during replay. If the workload refers to URLs that are stored in the production system, you should isolate the test system network during replay.
E-mails

To avoid resending E-mail notifications during replay, any E-mail server accessible to the replay system should be configured to ignore requests for outgoing E-mails.

Tip:

To avoid impacting other production systems during replay, Oracle strongly recommends running the replay within an isolated private network that does not have access to the production environment hosts.

12.1.4 Connection Remapping

During workload capture, connection strings used to connect to the production system are captured. In order for the replay to succeed, you need to remap these connection strings to the replay system. The replay clients can then connect to the replay system using the remapped connections.

For Oracle Real Application Clusters (Oracle RAC) databases, you can map all connection strings to a load balancing connection string. This is especially useful if the number of nodes on the replay system is different from the capture system. Alternatively, if you want to direct workload to specific instances, you can use services or explicitly specify the instance identifier in the remapped connection strings.

12.1.5 User Remapping

During workload capture, the username of the database user or schema used to connect to the production system is captured. You can choose to remap the captured username to that of a new user or schema.

12.1.6 Specifying Replay Options

After the database is restored, and connections and users are remapped, you can set the appropriate replay options. For example:

12.1.6.1 Specifying the Synchronization Method

The synchronization parameter controls the synchronization method used for database replay.

If the parameter is set to TIME, the replay will use the same wall-clock timing as the capture. All database session login times will be replayed exactly as the capture. Likewise, all timing between transactions within database sessions will be preserved and replayed as captured. This synchronization method will produce good replays for most workloads.

If this parameter is set to SCN, the COMMIT order in the captured workload will be observed during replay and all replay actions will be executed only after all dependent COMMIT actions have completed. This synchronization method may introduce significant delays for some workloads. If this is the case, it is recommended to use TIME as the synchronization parameter.

If this parameter is set to OBJECT_ID, all replay actions will be executed only after all relevant COMMIT actions have completed. Relevant COMMIT actions must meet the following criteria:

Issued before the given action in the workload capture
Modified at least one of the database objects for which the given action is referencing, either implicitly or explicitly

Setting this parameter to OBJECT_ID allows for more concurrency during workload replays for COMMIT actions that do not reference the same database objects during workload capture.

12.1.6.2 Controlling Session Connection Rate

The connect_time_scale parameter enables you to scale the elapsed time between the time when the workload capture began and each session connects. You can use this option to manipulate the session connect time during replay with a given percentage value. The default value is 100, which will attempt to connect all sessions as captured. Setting this parameter to 0 will attempt to connect all sessions immediately.

12.1.6.3 Controlling Request Rate Within a Session

User think time is the elapsed time while the replayed user waits between issuing calls within a single session. To control replay speed, use the think_time_scale parameter to scale user think time during replay.

If user calls are being executed slower during replay than during capture, you can make the database replay attempt to catch up by setting the think_time_auto_correct parameter to TRUE. This will make the replay client shorten the think time between calls, so that the overall elapsed time of the replay will more closely match the captured elapsed time.

If user calls are being executed faster during replay than during capture, setting the think_time_auto_correct parameter to TRUE will not change the think time. The replay client will not increase the think time between calls to match the captured elapsed time.

12.1.7 Using Filters with Workload Replay

By default, all captured database calls are replayed during workload replay. You can use workload filters to specify which database calls to include in or exclude from the workload during workload replay.

Workload replay filters are first defined and then added to a replay filter set so they can be used in a workload replay. There are two types of workload filters: inclusion filters and exclusion filters. Inclusion filters enable you to specify database calls that will be replayed. Exclusion filters enable you to specify database calls that will not be replayed. You can use either inclusion filters or exclusion filters in a workload replay, but not both. The workload filter is determined as an inclusion or exclusion filter when the replay filter set is created.

12.1.8 Setting Up Replay Clients

The replay client is a multithreaded program (an executable named wrc located in the $ORACLE_HOME/bin directory) where each thread submits a workload from a captured session. Before replay begins, the database will wait for replay clients to connect. At this point, you need to set up and start the replay clients, which will connect to the replay system and send requests based on what has been captured in the workload.

Before starting replay clients, ensure that the:

Replay client software is installed on the hosts where it will run
Replay clients have access to the replay directory
Replay directory contains the preprocessed workload capture
Replay user has the correct user ID, password, and privileges (the replay user needs the DBA role and cannot be the SYS user)
Replay clients are not started on a system that is running the database
Replay clients read the capture directory on a file system that is different from the one on which the database files reside

To do this, copy the capture directory to the system where the replay client will run. After the replay is completed, you can delete the capture directory.

After these prerequisites are met, you can proceed to set up and start the replay clients using the wrc executable. The wrc executable uses the following syntax:

wrc [user/password[@server]] MODE=[value] [keyword=[value]]

The parameters user, password and server specify the username, password and connection string used to connect to the replay database. The parameter mode specifies the mode in which to run the wrc executable. Possible values include replay (the default), calibrate, and list_hosts. The parameter keyword specifies the options to use for the execution and is dependent on the mode selected. To display the possible keywords and their corresponding values, run the wrc executable without any arguments.

The following sections describe the modes that you can select when running the wrc executable:

12.1.8.1 Calibrating Replay Clients

Since one replay client can initiate multiple sessions with the database, it is not necessary to start a replay client for each session that was captured. The number of replay clients that need to be started depends on the number of workload streams, the number of hosts, and the number of replay clients for each host.

To estimate the number of replay clients and hosts that are required to replay a particular workload, run the wrc executable in calibrate mode.

In calibrate mode, the wrc executable accepts the following keywords:

replaydir specifies the directory that contains the preprocessed workload capture you want to replay. If unspecified, it defaults to the current directory.
process_per_cpu specifies the maximum number of client processes that can run per CPU. The default value is 4.
threads_per_process specifies the maximum number of threads that can run within a client process. The default value is 50.

The following example shows how to run the wrc executable in calibrate mode:

%> wrc mode=calibrate replaydir=./replay

In this example, the wrc executable is executed to estimate the number of replay clients and hosts that are required to replay the workload capture stored in a subdirectory named replay under the current directory. In the following sample output, the recommendation is to use at least 21 replay clients divided among 6 CPUs:

Workload Replay Client: Release 12.1.0.0.1 - Production on Fri Sept 30
13:06:33 2011
 
Copyright (c) 1982, 2011, Oracle.  All rights reserved.
 
Report for Workload in: /oracle/replay/
-----------------------
 
Recommendation:
Consider using at least 21 clients divided among 6 CPU(s).
 
Workload Characteristics:
- max concurrency: 1004 sessions
- total number of sessions: 1013
 
Assumptions:
- 1 client process per 50 concurrent sessions
- 4 client process per CPU
- think time scale = 100
- connect time scale = 100
- synchronization = TRUE

12.1.8.2 Starting Replay Clients

After determining the number of replay clients that are needed to replay the workload, you need to start the replay clients by running the wrc executable in replay mode on the hosts where they are installed. Once started, each replay client will initiate one or more sessions with the database to drive the workload replay.

In replay mode, the wrc executable accepts the following keywords:

userid and password specify the user ID and password of a replay user for the replay client. If unspecified, these values default to the system user.
server specifies the connection string that is used to connect to the replay system. If unspecified, the value defaults to an empty string.
replaydir specifies the directory that contains the preprocessed workload capture you want to replay. If unspecified, it defaults to the current directory.
workdir specifies the directory where the client logs will be written. This parameter is only used with the debug parameter for debugging purposes.
debug specifies whether debug data will be created. Possible values include:
- on
  
  Debug data will be written to files in the working directory
- off
  
  No debug data will be written (the default value)
Note:

Before running the wrc executable in debug mode, contact Oracle Support for more information.
connection_override specifies whether to override the connection mappings stored in the DBA_WORKLOAD_CONNECTION_MAP view. If set to TRUE, connection remappings stored in the DBA_WORKLOAD_CONNECTION_MAP view will be ignored and the connection string specified using the server parameter will be used. If set to FALSE, all replay threads will connect using the connection remappings stored in the DBA_WORKLOAD_CONNECTION_MAP view. This is the default setting.
walletdir points to the location of the auto-login software keystore directory. The default value is an empty string. walletdir is mandatory during the replay of an encrypted workload capture. For a non-encrypted capture, walletdir must not be set and it defaults to an empty string.

Note:

For an encrypted workload capture, you must set the password using the oracle.rat.database_replay.encryption (case-sensitive) identifier. The password is stored in the auto-login software keystore.
During replay of encrypted workload capture, you must set up a separate client-side software keystore. For example:
```
rm -rf keystore_location 
mkdir keystore_location 
mkstore -wrl keystore_location -create 
mkstore -wrl keystore_location -createEntry 'oracle.rat.database_replay.encryption' secret_key 
mkstore -wrl keystore_location -createSSO 
```
secret_key must match the secret_key that was used in the server-side software keystore which was created during the encryption of the workload capture.

After all replay clients have connected, the database will automatically distribute workload capture streams among all available replay clients and workload replay can begin. You can monitor the status of the replay clients using the V$WORKLOAD_REPLAY_THREAD view. After the replay finishes, all replay clients will disconnect automatically.

Example: Running wrc executable in replay mode for a non-encrypted capture

The following example shows how to run the wrc executable in replay mode:

%> wrc system/password@test mode=replay replaydir=./replay

In this example, the wrc executable starts the replay client to replay the workload capture stored in a subdirectory named replay under the current directory.

Example: Running wrc executable in replay mode for an encrypted capture

The following example shows how to run the wrc executable in replay mode for an encrypted workload capture:

%> wrc system/password@test mode=replay replaydir=./replay walletdir=/tmp/replay_encrypt_cwallet

In this example, the wrc executable starts the replay client to replay the workload capture stored in a subdirectory named replay under the current directory. walletdir points to the location of the auto-login software keystore directory.

12.1.8.3 Displaying Host Information

You can display the hosts that participated in a workload capture and workload replay by running the wrc executable in list_hosts mode.

In list_hosts mode, the wrc executable accepts the keyword replaydir, which specifies the directory that contains the preprocessed workload capture you want to replay. If unspecified, it defaults to the current directory.

The following example shows how to run the wrc executable in list_hosts mode:

%> wrc mode=list_hosts replaydir=./replay

In this example, the wrc executable is executed to list all hosts that participated in capturing or replaying the workload capture stored in a subdirectory named replay under the current directory. In the following sample output, the hosts that participated in the workload capture and three subsequent replays are shown:

Workload Replay Client: Release 12.1.0.0.1 - Production on Fri Sept 30
13:44:48 2011
 
Copyright (c) 1982, 2011, Oracle.  All rights reserved.
 
Hosts found:
Capture:
        prod1
        prod2
Replay 1:
        test1
Replay 2:
        test1
        test2
Replay 3:
        testwin

12.2 Replaying a Database Workload Using Enterprise Manager

This section describes how to replay a database workload using Enterprise Manager.

Before proceeding, you must already have created a replay task and created a replay from the replay task. To do this, see "Preparing a Single Database Workload Using Enterprise Manager".

The primary tool for replaying database workloads is Oracle Enterprise Manager. If Oracle Enterprise Manager is unavailable, you can also replay database workloads using APIs, as described in "Replaying a Database Workload Using APIs".

To replay a database workload using Enterprise Manager:

From the Enterprise menu of the Enterprise Manager Cloud Control console, select Quality Management, then Database Replay.

If the Database Login page appears, log in as a user with administrator privileges.

The Database Replay page appears.

Description of the illustration dbr.gif
Select the Replay Tasks tab, then click the link for the desired replay task in the table.

The Replay Task page for the replay appears.

Description of the illustration dbr_replay_tasks.gif
Click Create in the Replays section to create the replay.

The Create Replay pop-up appears.
Provide a required Name and optional description, then click the Target Database icon.

The Search and Select: Targets pop-up appears.
Choose the appropriate database, then click Select.
Click OK in the Create Replay pop-up.

The Database Replay page for your replay appears, which includes a Task List with a link to perform the replay.

Description of the illustration dbr_replay_workload.gif
Click the link for the Replay Workload task.

The Replay Workload: Locate Workload page appears.

Description of the illustration dbr_replay_loc_wkload.gif
Select the desired workload location option.

If you have not previously copied the workload from its storage location to the replay location where the replay clients can access it, select the option to copy the workload. Otherwise, select the option to use the existing replay directory that contains the workload to be replayed.

Click Next to display the Replay Workload: Copy Workload page.

Description of the illustration dbr_replay_copy_wkload.gif
Provide the required credentials and the new location of the workload directory to which you want to copy the workload, then click Next.
- There are multiple source workloads for a consolidated replay, so multiple source credentials might be needed for the current location of the workload directory. For more information on consolidated replays, see "Using Consolidated Database Replay with Enterprise Manager."
The system responds by displaying a progress bar graph during processing, then displays the Replay Workload: Select Directory page after the copy operation concludes.

Description of the illustration dbr_replay_select_dir.gif
Specify the Directory Object, or create a new Directory Object that points to the location that contains the workload. If you chose to copy from the workload location to a new location in the previous step, make sure that the directory object points to the exact location you specified in the New Location of the Workload Directory section.

The system responds by displaying a Capture Summary. You can expand the Capture Details section to see the workload profile and workload filters. You can also generate a Workload Capture Analyzer Report and Database Capture Report. The Capture Summary does not appear for consolidated replays.

Click Next to display the Replay Workload: Initialize Options page.

Description of the illustration dbr_replay_init_options.gif
In the SQL Performance Analyzer section, retain or disable the Capture SQL Statements option, which is enabled by default and recommended. You can disable this option if you do not want to compare SQL tuning sets at the end of the replay.
- The SQL Performance Analyzer can initiate an impact analysis of environmental changes on the performance of SQL statements within a SQL Tuning Set. You can create and analyze SQL Performance Analyzer tasks to test the effects of a database upgrade, initialization parameter change, Exadata simulation, or custom experiments. A task compares the effects of before-trial changes with after-trial changes.
  
  Although Database Replay provides an analysis of how a change affects your entire system, you can use a SQL tuning set in conjunction with the SQL Performance Analyzer to gain a more SQL-centric analysis of how the change affects SQL statements and execution plans.
  
  By capturing a SQL tuning set during workload replay, you can use SQL Performance Analyzer to compare this SQL tuning set to another SQL tuning set captured during workload capture, without having to re-execute the SQL statements. This enables you to obtain a SQL Performance Analyzer report and compare the SQL performance, before and after change, while running Database Replay.
- In the Identify Source section, initial replay options refer to the connection mappings and parameters on the Customize Options page. Connections are captured along with the workload.
  
  Note:
  
  This section does not appear for consolidated replays or Oracle RAC.
Click Next to display the Replay Workload: Customize Options page.

Description of the illustration dbr_replay_cust_options.gif
Remap captured connection strings to connection strings that point to the replay system. Note that you need to remap each capture connection. For example, in the illustration above, you would need to remap the connection for both capture12_1 and capture12_adc.

(You can remap connections per workload for consolidated replay. There is a Capture Name drop-down to choose the workload.)

Click the Connection Mappings tab. There are several methods you can use to remap captured connection strings. You can choose to:
- Use a single connect descriptor for all client connections by selecting this option and entering the connect descriptor you want to use. The connect descriptor should point to the replay system.
  
  To test the connection, click Test Connection. If the connect descriptor is valid, an Information message is displayed to inform you that the connection was successful.
- Use a single TNS net service name for all client connections by selecting this option and entering the net service name you want to use. All replay clients must be able to resolve the net service name, which can be done using a local tnsnames.ora file.
- Use a separate connect descriptor or net service name for each client connect descriptor captured in the workload by selecting this option and, for each capture system value, entering a corresponding replay system value that the replay client will be use. If you selected the "Use replay options from a previous replay" option in the Initialize Options step, the "Use a separate connect descriptor" option is selected, and the previous replay system values appear in the text field below.
  
  Note:
  
  This option does not apply to consolidated replays.
Specify the replay options using the replay parameters, which control some aspects of the replay.

To modify the replay behavior, click the Replay Parameters tab and enter the desired values for each replay parameter. Using the default values is recommended. For information about setting the replay parameters, see .

After setting the replay parameters, click Next.

The Replay Workload: Prepare Replay Clients page appears.

Description of the illustration dbr_replay_prep_clients.gif
Ensure that the replay clients are prepared for replay:

Before proceeding, the replay clients must be set up.
1. Click Estimate to determine how many replay clients and CPUs are required for the replay.
2. Click Add Replay Client Hosts to add a host or hosts for the replay clients. (If you do not want to add any replay client hosts, you can still continue and start the replay clients from the command line outside of Enterprise Manager).
  
  The Search and Select: Replay Client Host pop-up appears.
  - Specify a Target Name and then click Go, or just click Go to display the entire list of available hosts.
  - Choose a host and then click Select.
3. When the host name appears in the Target column of the Replay Client Hosts table, specify the number of replay clients recommended from the estimate results, then make sure that the number of CPUs listed for the host satisfies the minimum recommendation in the estimate results. You should start at least one replay client per captured workload.
4. In the Configured column, click the No link to configure the replay client host in the pop-up that appears.
5. Click Apply after you have finished providing input in the pop-up. The Configured column now displays Yes in the Replay Client Hosts table.
Click Next to start the replay clients and display the Replay Workload: Wait for Client Connections page.

Description of the illustration dbr_replay_client.gif

Note:

If you have reached this step in the process from the Enterprise menu, you also need to enter credentials for the replay job and for the replay result storage host.
- As replay clients are started, the replay client connections are displayed in the Client Connections table.
- The text below the clock changes if a replay client is connected.
- The Client Connections table is populated when at least one replay client is connected.
When all replay clients have connected, enter host credentials at the bottom of the page to start the replay job, then click Next to display the Replay Workload: Review page.
Review the options and parameters that have been defined for the workload replay.
- The value for Connected Replay Clients must be at least 1 in order to successfully submit the Replay Workload job.
- The Submit button is enabled only if at least one replay client is connected.
If everything appears as you have intended, click Submit to submit the replay job.

After the replay starts, the Home tab of the Database Replay page for this replay reappears with a system message that states "The workload replay has started."

See Also:

12.3 Setting Up the Replay Schedule and Parameters Using Enterprise Manager

The replay schedule feature enables you to scale up the instances of captured workloads to be included in a consolidated replay, and then control the relative playback scheduling of the instances within the replay. The relative scheduling of the captured workload instances is visually displayed by updating the alignment of the active session chart for each instance.

This feature is available for Cloud Control Database plug-in 12.1.0.5 and later releases.

This feature enables you to accomplish the following tasks:

Offset instances so that they execute at different time intervals

You can adjust the relative replay start time of each workload instance to align the average active sessions peak times for scheduled instances of Capture workloads. This alignment of the workload peaks potentially maximizes the load on the system, so that you can experiment with how the test system responds under different workload conditions.
Scale up the replay workload by adding instances of the captured workload

Each added instance is replayed independently of the other instances.

When you scale up a workload by specifying multiple instances of it, the default and recommended configuration is to replay the DML statements in one of the instances. All of the additional instances will only replay the query (ready-only) statements.

For example, if a workload has a SQL Insert to an employee database, you normally would want to have only one instance that executes the Insert, and the others would bypass user calls that modify the database with this Insert. However, you can override the default setting of an instance by unchecking the Replay Query-only check box to replay all statements in the workload.

To access the Plan Replay Schedule page:

From the Database Replay home page, click on the Replay Tasks tab.
Click on the name of an existing replay task with more than one workload to navigate to the Replay Task page.
Click Create to create a new replay.
Provide the requisite information in the Create Replay pop-up, then click OK.

The new replay appears in the Replays table.
Click the name of your new replay in the Replays table.

A Task List now appears in the Replay page.
Click the Plan Replay Schedule link.

The Plan Replay Schedule page appears.

To scale up a replay:

In the drop-down next to the Add Workload Instance button, select the Capture workload for which you want to add an instance.
Click Add Workload Instance to add the instance.

To schedule the time intervals:

From the Replay Delay column, either leave the default value of 0 for the first capture instance, or adjust the number of minutes desired before the instance starts to execute.
Repeat the step above for each capture instance until you have set all of the values to represent how you want the performance spikes to execute for your testing needs.

To auto-align workload peaks:

Click the Auto-align button.

To specify query-only instances:

For each instance that you want to be query-only, enable the Replay Query-only check box.

To review the updated schedule:

From the Replay Task tab of the Database Replay page, click the Replay task link containing your scheduled replay.

The Replay Task page appears.
Click the scheduled replay in the Replays table.
Select the Review tab in the Replay page.

12.4 Monitoring Workload Replay Using Enterprise Manager

This section describes how to monitor workload replay using Enterprise Manager. The primary tool for monitoring workload replay is Oracle Enterprise Manager. Using Enterprise Manager, you can:

Monitor or stop an active workload replay
View a completed workload replay

If Oracle Enterprise Manager is unavailable, you can monitor workload replay using APIs and views, as described in "Monitoring Workload Replay Using APIs".

This section contains the following topics:

12.4.1 Monitoring an Active Workload Replay

This section describes how to monitor an active workload replay using Enterprise Manager.

To monitor an active workload replay:

From the Database Replay page, click the Replay Tasks tab.
Click the name of the replay task that contains the replay for which you want to monitor replay progress.
From the Replays section of the Replay Task page, click the name of the replay you have submitted for processing in the Create Replay wizard. (The Status column for this replay should show In Progress.)
The Home tab of the Database Replay page appears, and the Replay Summary shows a Status of Running.
- The replay line in the Replay Progress chart updates dynamically while the replay is in progress. You can update the chart by clicking the Refresh button.
- The user calls line in the Replay Progress chart indicates how much of the workload the database has serviced relative to the capture at the same time.
- Data for the Replay Divergence Summary is not available until the replay completes.

12.4.2 Viewing a Completed Workload Replay

This section describes how to view a completed workload replay using Enterprise Manager.

To view a completed workload replay:

From the Database Replay page, click the Replay Tasks tab.
Click the name of the replay task that contains the completed replay you want to view.
From the Replays section of the Replay Task page, click the name of the replay you have submitted for processing in the Create Replay wizard. (The Status column for this replay should show Completed.)
The Home tab of the Database Replay page appears, and the Replay Summary shows a Status of Completed.

Description of the illustration dbr_replay_completed.gif
- The replay line in the User Calls chart graphically represents the replay progress during the course of the entire replay from initiation to conclusion.
  
  The chart shows how much time it has taken to replay the same workload compared to the elapsed time during the workload capture in terms of user calls. If the Replay line is above or to the left of the Capture line, the replay system is processing the workload faster than the capture system.
- Under the Replay Divergence Summary, any errors and data discrepancies between the replay system and the capture system are displayed as diverged database calls during replay. You can use the percentage of total calls that diverged as a measure of the replay quality.
  
  To view details about the diverged calls, click the link that corresponds to the type of diverged call in the Count column to access the Diverged Calls During Replay page. The Diverged Calls During Replay page shows the most relevant set of replayed calls that diverged from the workload captured by grouping them based on common attribute values and specified filter conditions. To view details about a particular diverged call—such as the call attributes, SQL text, and bind variables—click the corresponding link in the SQL ID column to bring up the Replay Diverged Statement page.
To return to the Database Replay page, click the Database Replay breadcrumb.

See Also:

"Analyzing Captured and Replayed Workloads" for information about accessing workload replay reports

12.5 Importing a Replay External to Enterprise Manager

As with importing workloads external to Enterprise Manager, you can import replays into Enterprise Manager to manage them. To import a replay, you import it from a replay task, which can contain one or more workloads and one or more replays. The replay task is at the top of the database replay hierarchy, and serves as the container for these other subordinate components.

A replay to be imported can be running in the test database, or the replay can be completed and the replay directory stored on a file system.

This feature is available for Cloud Control Database plug-in 12.1.0.5 and later releases.

To import a replay external to Enterprise Manager:

From the Database Replay page, click the Replay Tasks tab, then select the desired replay task.

The Replay Task page appears.
Click Import in the Replays section.

The Import Replay: Source page appears
Select one of the three choices available to import a replay, then click Next.
- Import one or more completed Replays from a directory in the file system
  
  This option typically applies for a replay created using an API, in which you now want to import it to Enterprise Manager for subsequent processing. In this case, Enterprise Manager may not be necessarily managing the replay database.
- Import one or more completed Replays from a database target
  
  In this case, Enterprise Manager is probably already managing the replay database. The replay could have been done on this database, or it could have been loaded in as would be the case for the option above.
- Attach to a Replay of this Replay task running in a database target
  
  This option is similar to the option above, except this replay is still in progress, rather than one that has already completed.
The Import Replay: Database page appears.
Click the search icon next to the Database Target field and select a database from the pop-up that appears.

Note:

The target version of the database reading the replay must be at least as high as the one you used in the replay task. For instance, if the replay task used Oracle Database 12x, the database you select to read the replay must be at least version 12x.
- The system now requests database and host credentials.
- In the previous step, if you chose to import one or more completed replays from a directory in the file system, the system also requires a workload location.
- The replay task can determine if this is a consolidated replay based on the number of workloads contained in the replay task. If this is a consolidated replay, this step asks you to enter a consolidated replay directory for the workload location.
Provide the requisite input for the step above, then click Next.

The Import Replay: Replay page appears.
- If you chose "Import one or more completed Replays from a directory in the file system" in step 3, this page provides a Load Replay button.
- If you chose “Import one or more completed Replays from a database target" or “Attach to a Replay of this Replay task running in a database target" in step 3, this page provides a Discover Replay button.
Click either Load Replay or Discover Replay, depending on which button is available in accordance with your selection in step 3.

The system displays one or more replays, if found, in the Discovered Replays table.
Either click Next to load the replay, or select one or more replays, then click Next to continue importing the replays.

The Import Replay: Review page appears.
If everything appears as you have intended, click Submit.

The Database Replay page reappears and displays a message stating that the job was submitted successfully. The Status column in the table for your imported replay will show In Progress.

Tip:

You can check on the job's progress by clicking on the replay name that you just submitted in the Review step. A Replay Summary page appears, and you can click the Database Replay Import Job link to see the progress of the job execution steps.

12.6 Replaying a Database Workload Using APIs

This section describes how to replay a database workload using the DBMS_WORKLOAD_REPLAY package. You can also use Oracle Enterprise Manager to replay a database workload, as described in "Replaying a Database Workload Using Enterprise Manager".

Replaying a database workload using the DBMS_WORKLOAD_REPLAY package is a multi-step process that involves:

See Also:

Oracle Database PL/SQL Packages and Types Reference for information about the DBMS_WORKLOAD_REPLAY package

12.6.1 Initializing Replay Data

After the workload capture is preprocessed and the test system is properly prepared, the replay data can be initialized. Initializing replay data loads the necessary metadata into tables required by workload replay. For example, captured connection strings are loaded into a table where they can be remapped for replay.

To initialize replay data:

Use the INITIALIZE_REPLAY procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.INITIALIZE_REPLAY (replay_name => 'dec06_102',
                           replay_dir => 'dec06',
                           plsql_mode => 'top_level');
END;
/
```
In this example, the INITIALIZE_REPLAY procedure loads preprocessed workload data from the dec06 directory into the database.

The INITIALIZE_REPLAY procedure in this example uses the following parameters:
- The replay_name required parameter specifies a replay name that can be used with other APIs to retrieve settings and filters of previous replays.
- The replay_dir required parameter specifies the directory that contains the workload capture that will be replayed.
- The optional plsql_mode parameter specifies the PL/SQL replay mode.
  
  These two values can be set for the plsql_mode parameter:
  - top_level: Only top-level PL/SQL calls. This is the default value.
  - extended: SQL executed inside PL/SQL or top-level PL/SQL if there is no SQL recorded inside. Non-PL/SQL calls will be replayed in the usual manner.

Note:

To run INITIALIZE_REPLAY on an encrypted workload capture, you need to set the password using the oracle.rat.database_replay.encryption (case-sensitive) identifier. The password is stored in a software keystore. You can find whether a workload capture is encrypted or not from DBA_WORKLOAD_CAPTURES view.

See Also:

"Preprocessing a Database Workload Using APIs" for information about preprocessing a workload capture
"Steps for Replaying a Database Workload" for information preparing the test system

12.6.2 Remapping Connections

After the replay data is initialized, connection strings used in the workload capture need to be remapped so that user sessions can connect to the appropriate databases and perform external interactions as captured during replay. To view connection mappings, use the DBA_WORKLOAD_CONNECTION_MAP view.

To remap connections:

Use the REMAP_CONNECTION procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.REMAP_CONNECTION (connection_id => 101,
                           replay_connection => 'dlsun244:3434/bjava21');
END;
/
```
In this example, the connection that corresponds to the connection ID 101 will use the new connection string defined by the replay_connection parameter.

The REMAP_CONNECTION procedure in this example uses the following parameters:
- The connection_id required parameter is generated when initializing replay data and corresponds to a connection from the workload capture.
- The replay_connection required parameter specifies the new connection string that will be used during workload replay.

See Also:

"Connection Remapping"

12.6.3 Remapping Users

Aside from remapping connection strings, you can also use a new schema or user instead of the user captured in the workload capture. To view captured users, use the DBA_WORKLOAD_USER_MAP view.

To remap users:

Use the SET_USER_MAPPING procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.SET_USER_MAPPING (capture_user => 'PROD',
                           replay_user => 'TEST');
END;
/
```
In this example, the PROD user used during capture is remapped to the TEST user during replay.

The SET_USER_MAPPING procedure in this example uses the following parameters:
- The capture_user required parameter specifies the username captured during the time of the workload capture.
- The replay_user required parameter specifies the username to which the captured user is remapped during replay. If this parameter is set to NULL, then the mapping is disabled.

See Also:

"User Remapping"

12.6.4 Setting Workload Replay Options

After the replay data is initialized, and connections and users are remapped, you need to prepare the database for workload replay.

To prepare workload replay on the replay system:

Use the PREPARE_REPLAY procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.PREPARE_REPLAY (synchronization => 'OBJECT_ID',
                           capture_sts => TRUE,
                           sts_cap_interval => 300);
END;
/
```
In this example, the PREPARE_REPLAY procedure prepares a replay that has been previously initialized. A SQL tuning set will also be captured in parallel with the workload replay.

The PREPARE_REPLAY procedure uses the following parameters:
- The synchronization required parameter controls the type of synchronization used during workload replay.
  
  If the parameter is set to TIME, the replay will use the same wall-clock timing as the capture. All database session login times will be replayed exactly as the capture. Likewise, all timing between transactions within database sessions will be preserved and replayed as captured. This synchronization method will produce good replays for most workloads.
  
  If this parameter is set to SCN (the default value), the COMMIT order in the captured workload will be observed during replay and all replay actions will be executed only after all dependent COMMIT actions have completed. This synchronization method may introduce significant delays for some workloads. If this is the case, it is recommended to use TIME as the synchronization parameter.
  
  If this parameter is set to OBJECT_ID, all replay actions will be executed only after all relevant COMMIT actions have completed. Relevant COMMIT actions must meet the following criteria:
  - Issued before the given action in the workload capture
  - Modified at least one of the database objects for which the given action is referencing, either implicitly or explicitly
  Setting this parameter to OBJECT_ID can allow for more concurrency during workload replays for COMMIT actions that do not reference the same database objects during workload capture.
- The connect_time_scale parameter scales the elapsed time from when the workload capture started to when the session connects with the specified value and is interpreted as a % value. Use this parameter to increase or decrease the number of concurrent users during replay. The default value is 100.
- The think_time_scale parameter scales the elapsed time between two successive user calls from the same session and is interpreted as a % value. Setting this parameter to 0 will send user calls to the database as fast as possible during replay. The default value is 100.
- The think_time_auto_correct parameter corrects the think time (based on the think_time_scale parameter) between calls when user calls take longer to complete during replay than during capture. This parameter can be set to either TRUE or FALSE. Setting this parameter to TRUE reduces the think time if the workload replay is taking longer than the workload capture. The default value is TRUE.
- The scale_up_multiplier parameter defines the number of times the workload is scaled up during replay. Each captured session will be replayed concurrently for as many times as specified by this parameter. However, only one session in each set of identical replay sessions will execute both queries and updates. The rest of the sessions will only execute queries.
- The capture_sts parameter specifies whether to capture a SQL tuning set in parallel with the workload replay. If this parameter is set to TRUE, you can capture a SQL tuning set during workload replay and use SQL Performance Analyzer to compare it to another SQL tuning set without having to re-execute the SQL statements. This enables you to obtain a SQL Performance Analyzer report and compare the SQL performance—before and after the change—while running Database Replay. You can also export the resulting SQL tuning set with its AWR data using the EXPORT_AWR procedure, as described in "Exporting AWR Data for Workload Replay".
  
  This feature is not supported for Oracle RAC. Workload replay filters that are defined using DBMS_WORKLOAD_REPLAY do not apply to the SQL tuning set capture. The default value for this parameter is FALSE.
- The sts_cap_interval parameter specifies the duration of the SQL tuning set capture from the cursor cache in seconds. The default value is 300. Setting the value of this parameter below the default value may cause additional overhead with some workloads and is not recommended.

For more information about setting these parameters, see "Specifying Replay Options".

12.6.5 Defining Workload Replay Filters and Replay Filter Sets

This section describes how to add and remove workload replay filters, and how to create and use replay filter sets.

This section contains the following topics:

See Also:

"Using Filters with Workload Replay"

12.6.5.1 Adding Workload Replay Filters

This section describes how to add a new filter to be used in a replay filter set.

To add a new filter:

Use the ADD_FILTER procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.ADD_FILTER (
                           fname => 'user_ichan',
                           fattribute => 'USER',
                           fvalue => 'ICHAN');
END;
/
```
In this example, the ADD_FILTER procedure adds a filter named user_ichan, which can be used to filter out all sessions belonging to the user name ICHAN.

The ADD_FILTER procedure in this example uses the following parameters:
- The fname required parameter specifies the name of the filter that will be added.
- The fattribute required parameter specifies the attribute on which the filter will be applied. Valid values include PROGRAM, MODULE, ACTION, SERVICE, USER, and CONNECTION_STRING. You must specify a valid captured connection string that will be used during replay as the CONNECTION_STRING attribute.
- The fvalue required parameter specifies the value for the corresponding attribute on which the filter will be applied. It is possible to use wildcards such as % with some of the attributes, such as modules and actions.
Once all workload replay filters are added, you can create a replay filter set that can be used when replaying the workload.

12.6.5.2 Deleting Workload Replay Filters

This section describes how to delete workload replay filters.

To delete workload replay filters:

Use the DELETE_FILTER procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.DELETE_FILTER (fname => 'user_ichan');
END;
/
```
In this example, the DELETE_FILTER procedure removes the filter named user_ichan.

The DELETE_FILTER procedure uses the fname required parameter, which specifies the name of the filter to be removed.

12.6.5.3 Creating a Replay Filter Set

After the workload replay filters are added, you can create a set of replay filters to use with workload replay. When creating a replay filter set, all workload replay filters that were added since the previous replay filter set was created will be used.

To create a replay filter set:

Use the CREATE_FILTER_SET procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.CREATE_FILTER_SET (
                           replay_dir => 'apr09',
                           filter_set => 'replayfilters',
                           default_action => 'INCLUDE');
END;
/
```
In this example, the CREATE_FILTER_SET procedure creates a replay filter set named replayfilters, which will replay all captured calls for the replay stored in the apr09 directory, except for the part of the workload defined by the replay filters.

The CREATE_FILTER_SET procedure in this example uses the following parameters:
- The replay_dir parameter specifies the directory where the replay to be filtered is stored
- The filter_set parameter specifies the name of the filter set to create
- The default_action parameter determines if every captured database call should be replayed and whether the workload replay filters should be considered as inclusion or exclusion filters.
  
  If this parameter is set to INCLUDE, all captured database calls will be replayed, except for the part of the workload defined by the replay filters. In this case, all replay filters will be treated as exclusion filters, since they will define the part of the workload that will not be replayed. This is the default behavior.
  
  If this parameter is set to EXCLUDE, none of the captured database calls will be replayed, except for the part of the workload defined by the replay filters. In this case, all replay filters will be treated as inclusion filters, since they will define the part of the workload that will be replayed.

12.6.5.4 Using a Replay Filter Set

Once the replay filter set is created and the replay is initialized, you can use the replay filter set to filter the replay in the replay_dir directory.

To use a replay filter set:

Use the USE_FILTER_SET procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.USE_FILTER_SET (filter_set => 'replayfilters');
END;
/
```
In this example, the USE_FILTER_SET procedure uses the filter set named replayfilters.

The USE_FILTER_SET procedure in this example uses the filter_set required parameter, which specifies the name of the filter set to be used in the replay.

12.6.6 Setting the Replay Timeout Action

This section describes how to set a timeout action for the workload replay. You can set a replay timeout action to abort user calls that are significantly slower during replay or cause a replay to hang. For example, you may want to set a replay timeout action to abort runaway queries caused by sub-optimal execution plans following a database upgrade.

When a replay timeout action is enabled, a user call will exit with an ORA-15569 error if it is delayed beyond the conditions specified by the replay timeout action. The aborted call and its error are reported as error divergence.

To set a replay timeout:

Use the SET_REPLAY_TIMEOUT procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.SET_REPLAY_TIMEOUT (
                           enabled => TRUE,
                           min_delay => 20,
                           max_delay => 60,
                           delay_factor => 10);
END;
/
```
In this example, the SET_REPLAY_TIMEOUT procedure defines a replay timeout action that will abort a user call if the delay during replay is more than 60 minutes, or if the delay during replay is over 20 minutes and the elapsed time is 10 times greater than the capture elapsed time.

The SET_REPLAY_TIMEOUT procedure in this example uses the following parameters:
- The enabled parameter specifies if the replay timeout action is enabled or disabled. The default value is TRUE.
- The min_delay parameter defines the lower bound value of call delay in minutes. The replay timeout action is only activated when the delay is over this value. The default value is 10.
- The max_delay parameter defines the upper bound value of call delay in minutes. The replay timeout action is activated and issues an error when the delay is over this value. The default value is 120.
- The delay_factor parameter defines a factor for the call delays that are between the values of min_delay and max_delay. The replay timeout action issues an error when the current replay elapsed time is higher than the multiplication of the capture elapsed time and this value. The default value is 8.

To retrieve the replay timeout action setting:

Use the GET_REPLAY_TIMEOUT procedure:
```
DECLARE
  enabled        BOOLEAN;
  min_delay      NUMBER;
  max_delay      NUMBER;
  delay_factor   NUMBER;
BEGIN
  DBMS_WORKLOAD_REPLAY.GET_REPLAY_TIMEOUT(enabled, min_delay, max_delay,
                           delay_factor);
END;
/
```
The GET_REPLAY_TIMEOUT procedure in this example returns the following parameters:
- The enabled parameter returns whether the replay timeout action is enabled or disabled.
- The min_delay parameter returns the lower bound value of call delay in minutes.
- The max_delay parameter returns the upper bound value of call delay in minutes.
- The delay_factor parameter returns the delay factor.

12.6.7 Starting a Workload Replay

There are tasks to perform before starting a workload replay. For example:

Preprocess the captured workload, as described in "Preprocessing a Database Workload Using APIs"
Initialize the replay data, as described in "Initializing Replay Data"
Specify the replay options, as described in "Setting Workload Replay Options"
Start the replay clients, as described in "Starting Replay Clients"

Note:

Once a workload replay is started, new replay clients will not be able to connect to the database. Only replay clients that were started before the START_REPLAY procedure is executed will be used to replay the captured workload.

To start a workload replay:

Use the START_REPLAY procedure:

BEGIN
  DBMS_WORKLOAD_REPLAY.START_REPLAY ();
END;
/

Note:

Starting with Oracle Database Release 19c, the DBA_RAT_CAPTURE_SCHEMA_INFO view provides login_schema and current_schema information for SQL statements. During a replay in the extended mode, if you encounter the ORA-00942: table or view does not exist error, then use the DBA_RAT_CAPTURE_SCHEMA_INFO and DBA_WORKLOAD_CAPTURE_SQLTEXT views to find the tables on which the error happened. Then grant the necessary privileges on the tables to the users who hit the error and retry the replay; this may fix the problem.

12.6.8 Pausing a Workload Replay

Pausing a workload replay will halt all subsequent user calls issued by the replay clients until the workload replay is either resumed or cancelled. User calls that are already in progress will be allowed to complete. This option enables you to temporarily stop the replay to perform a change and observe its impact for the remainder of the replay.

To pause a workload replay:

Use the PAUSE_REPLAY procedure:

BEGIN
  DBMS_WORKLOAD_REPLAY.PAUSE_REPLAY ();
END;
/

12.6.9 Resuming a Workload Replay

This section describes how to resume a workload replay that is paused.

To resume a workload replay:

Use the RESUME_REPLAY procedure:

BEGIN
  DBMS_WORKLOAD_REPLAY.RESUME_REPLAY ();
END;
/

12.6.10 Cancelling a Workload Replay

This section describes how to cancel a workload replay.

To cancel a workload replay:

Use the CANCEL_REPLAY procedure:

BEGIN
  DBMS_WORKLOAD_REPLAY.CANCEL_REPLAY ();
END;
/

12.6.11 Retrieving Information About Workload Replays

You can retrieve all information about the workload captures in a replay directory object and the history of the workload replay attempts from the directory. By default, the workload replay divergence data is not loaded, but you can selectively choose to load this data.

To retrieve information about workload replays:

Call the DBMS_WORKLOAD_REPLAY.GET_REPLAY_INFO function.

The GET_REPLAY_INFO function first imports a row into the DBA_WORKLOAD_CAPTURES view, which contains information about the workload capture. By default, it then only imports information for replays that have not been previously loaded into the DBA_WORKLOAD_REPLAYS view. This function returns the cap_id of the capture directory (for a consolidated capture directory, the cap_id returned is 0), which can be associated with the CAPTURE_ID column in the DBA_WORKLOAD_REPLAYS view to access the information retrieved.

The GET_REPLAY_INFO function uses the following parameters:
- The replay_dir required parameter, which specifies the name of the workload replay directory object.
- The load_divergence optional parameter, which specifies if divergence data is loaded. The default value for this parameter is FALSE. To load divergence data, which imports rows for every replay attempt retrieved from the replay directory into the DBA_WORKLOAD_REPLAY_DIVERGENCE view, set this parameter to TRUE. Alternatively, you can use the LOAD_DIVERGENCE procedure to selectively load divergence data for a single replay or all replays in a directory object after the replay information is retrieved, as described in "Loading Divergence Data for Workload Replay".

Example 12-1 Retrieving information about workload replay

The following example shows how to retrieve information about the workload captures and the history of the workload replay attempts for the replay directory object named jul14, and to validate that the information is retrieved.

DECLARE
  cap_id         NUMBER;
BEGIN
  cap_id := DBMS_WORKLOAD_REPLAY.GET_REPLAY_INFO(replay_dir => 'jul14');
  SELECT capture_id
    FROM dba_workload_replays
   WHERE capture_id = cap_id;
END;
/

12.6.12 Loading Divergence Data for Workload Replay

Loading divergence data for workload replay imports rows for every replay attempt retrieved from the replay directory into the DBA_WORKLOAD_REPLAY_DIVERGENCE view, which displays information about diverged calls and errors during replay attempts. You can choose to load divergence data for either a single workload replay or all workload replays in a given directory object.

To load divergence data for workload replay:

Call the WORKLOAD_REPLAY.LOAD_DIVERGENCE procedure using one of the following parameters:
- The replay_id parameter specifies the ID of the workload replay for which you want to load divergence data. Use this parameter if you only want to load divergence data for a single workload replay.
- The replay_dir parameter specifies the name of the directory object (the value is case-sensitive). Use this parameter if you want to load divergence data for all workload replays in a given directory object.
To check the loading status of divergence data, query the DIVERGENCE_LOAD_STATUS column in the DBA_WORKLOAD_REPLAYS view.

A value of TRUE indicates that the divergence data is loaded, and a value of FALSE indicates that it has not been loaded.

Example 12-2 Loading divergence data for a single workload replay

The following example shows how to load divergence data for the workload replay with a replay_id value of 12, and to validate that the divergence data is loaded.

DECLARE
  rep_id         NUMBER;
BEGIN
  rep_id := DBMS_WORKLOAD_REPLAY.LOAD_DIVERGENCE (replay_id => 12);
  SELECT divergence_load_status
    FROM dba_workload_replays
   WHERE capture_id = rep_id;
END;
/

12.6.13 Deleting Information About Workload Replays

You can delete information retrieved for either a single workload replay or all workload replays in a replay directory. Deleted information can be retrieved using the GET_REPLAY_INFO function, as described in "Retrieving Information About Workload Replays".

To delete information about workload replays:

Call the DBMS_WORKLOAD_REPLAY.DELETE_REPLAY_INFO procedure using the replay_id parameter.
- The replay_id parameter specifies the ID of the workload replay for which you want to delete replay information. Use this parameter if you only want to delete information for a single workload replay.
By default, deleting information about workload replays does not remove the data from disk.

Example 12-3 Deleting information about workload replay

The following example deletes information retrieved about the workload captures and the history of the workload replay attempts for the workload replay with an ID of 2. The replay data is not deleted from disk, and thus can be retrieved by calling the GET_REPLAY_INFO function, as described in "Retrieving Information About Workload Replays".

BEGIN
  DBMS_WORKLOAD_REPLAY.DELETE_REPLAY_INFO (replay_id => 2);
END;
/

12.6.14 Exporting AWR Data for Workload Replay

Exporting AWR data enables detailed analysis of the workload. This data is also required if you plan to run the AWR Compare Period report on a pair of workload captures or replays.

To export AWR data:

Use the EXPORT_AWR procedure:
```
BEGIN
  DBMS_WORKLOAD_REPLAY.EXPORT_AWR (replay_id => 1);
END;
/
```
In this example, the AWR snapshots that correspond to the workload replay with a replay ID of 1 are exported, along with any SQL tuning set that may have been captured during workload replay.

The EXPORT_AWR procedure uses the replay_id required parameter, which specifies the ID of the replay whose AWR snapshots will be exported.

Note:

This procedure works only if the corresponding workload replay was performed in the current database and the AWR snapshots that correspond to the original replay time period are still available.

12.6.15 Importing AWR Data for Workload Replay

After AWR data is exported from the replay system, you can import the AWR data into another system. Importing AWR data enables detailed analysis of the workload. This data is also required if you plan to run the AWR Compare Period report on a pair of workload captures or replays.

To import AWR data:

Use the IMPORT_AWR function:
```
CREATE USER capture_awr
SELECT DBMS_WORKLOAD_REPLAY.IMPORT_AWR (replay_id => 1,
                                        staging_schema => 'capture_awr')
  FROM DUAL;
```
In this example, the AWR snapshots that correspond to the workload replay with a capture ID of 1 are imported using a staging schema named capture_awr.

The IMPORT_AWR procedure in this example uses the following parameters:
- The replay_id required parameter specifies the ID of the replay whose AWR snapshots will be import.
- The staging_schema required parameter specifies the name of an existing schema in the current database which will be used as a staging area while importing the AWR snapshots from the replay directory to the SYS AWR schema.

Note:

This function fails if the schema specified by the staging_schema parameter contains any tables with the same name as any of the AWR tables.

12.7 Monitoring Workload Replay Using APIs

This section describes how to monitor workload replay using APIs and views. You can also use Oracle Enterprise Manager to monitor workload replay, as described in "Monitoring Workload Replay Using Enterprise Manager".

This section contains the following topics:

12.7.1 Retrieving Information About Diverged Calls

During replay, any error and data discrepancies between the replay system and the capture system are recorded as diverged calls.

To retrieve information about a diverged call—including its SQL identifier, SQL text, and bind values—call the GET_DIVERGING_STATEMENT function using the following parameters:

Set the replay_id parameter to the ID of the replay in which the call diverged
Set the stream_id parameter to the stream ID of the diverged call
Set the call_counter parameter to the call counter of the diverged call

To view these information about a diverged call, use the DBA_WORKLOAD_REPLAY_DIVERGENCE view. The following example illustrates a function call:

DECLARE
  r                   CLOB;
  ls_stream_id        NUMBER;
  ls_call_counter     NUMBER;
  ls_sql_cd           VARCHAR2(20);
  ls_sql_err          VARCHAR2(512);
  CURSOR c IS
  SELECT stream_id, call_counter
  FROM DBA_WORKLOAD_REPLAY_DIVERGENCE
  WHERE replay_id = 72;
BEGIN
  OPEN c;
  LOOP
  FETCH c INTO ls_stream_id, ls_call_counter;
  EXIT when c%notfound;
  DBMS_OUTPUT.PUT_LINE (ls_stream_id||''||ls_call_counter);
  r:=DBMS_WORKLOAD_REPLAY.GET_DIVERGING_STATEMENT(replay_id => 72,
  stream_id => ls_stream_id, call_counter => ls_call_counter);
  DBMS_OUTPUT.PUT_LINE (r);
  END LOOP;
END;
/

See Also:

Oracle Database PL/SQL Packages and Types Reference for information about the DBMS_WORKLOAD_REPLAY package

12.7.2 Monitoring Workload Replay Using Views

This section summarizes the views that you can display to monitor workload replay. You need DBA privileges to access these views.

The DBA_WORKLOAD_CAPTURES view lists all the workload captures that have been captured in the current database.
The DBA_WORKLOAD_FILTERS view lists all workload filters for workload captures defined in the current database.
The DBA_WORKLOAD_REPLAYS view lists all the workload replays that have been replayed in the current database.
The DBA_WORKLOAD_REPLAY_DIVERGENCE view enables you to view information about diverged calls, such as the replay identifier, stream identifier, and call counter.
The DBA_WORKLOAD_DIV_SUMMARY view displays a summary of the replay divergence information in the DBA_WORKLOAD_REPLAY_DIVERGENCE view.
The DBA_WORKLOAD_REPLAY_FILTER_SET view lists all workload filters for workload replays defined in the current database.
The DBA_WORKLOAD_CONNECTION_MAP view lists the connection mapping information for workload replay.
The V$WORKLOAD_REPLAY_THREAD view lists information about all sessions from the replay clients.

See Also:

Oracle Database Reference for information about these views