You can configure an XStream administrator by granting a user the appropriate privileges. You must configure an XStream administrator in each Oracle database included in the XStream configuration.

Prerequisites

Before configuring an XStream administrator, ensure that the following prerequisites are met:

• Ensure that you can log in to each database in the XStream configuration as an administrative user who can create users, grant privileges, and create tablespaces.

• Decide between the trusted user model and untrusted user model for security. See "XStream Security Models" for more information.

• Identify a user who will be the XStream administrator. Either create a new user with the appropriate privileges or grant these privileges to an existing user.

  Do not use the SYS or SYSTEM user as an XStream administrator, and ensure that the XStream administrator does not use the SYSTEM tablespace as its default tablespace.

• If a new tablespace is required for the XStream administrator, then ensure that there is enough disk space on each computer system in the XStream configuration for the tablespace. The recommended size of the tablespace is 25 MB.

• The user executing the subprograms in the DBMS_XSTREAM_AUTH package must have SYSDBA administrative privilege, and the user must exercise the privilege using AS SYSDBA at connect time.

Assumptions

This section makes the following assumptions:

• The user name of the XStream administrator is xstrmadmin for a non-CDB. The user name of the XStream administrator is c##xstrmadmin for a multitenant container database (CDB).

• The tablespace used by the XStream administrator is xstream_tbs.

To configure an XStream administrator:

1. In SQL*Plus, connect as an administrative user who can create users, grant privileges, and create tablespaces. Remain connected as this administrative user for all subsequent steps.

   If you are configuring an XStream administrator for XStream Out in a CDB, then connect to the root and configure the XStream administrator in the CDB root.

   See Also:

   • Oracle Database Administrator’s Guide for information about connecting to a database in SQL*Plus

   • "XStream Out and a Multitenant Environment" for more information about XStream Out and CDBs

2. Either create a tablespace for the XStream administrator or use an existing tablespace.

   This tablespace stores any objects created in the XStream administrator's schema.

   For example, the following statement creates a new tablespace for the XStream administrator:

   CREATE TABLESPACE xstream_tbs DATAFILE '/usr/oracle/dbs/xstream_tbs.dbf' 
     SIZE 25M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;
   

   If you are creating an XStream administrator in a CDB, then you must create the tablespace in all of the containers in the CDB, including the CDB root, all pluggable databases (PDBs), all application roots, and all application containers. The tablespace is required in all containers because the XStream administrator must be a common user and so must have access to the tablespace in any container.

3. Create a new user to act as the XStream administrator or identify an existing user.

   For example, to create a user named xstrmadmin and specify that this user uses the xstream_tbs tablespace, run the following statement:

   CREATE USER xstrmadmin IDENTIFIED BY password 
     DEFAULT TABLESPACE xstream_tbs
     QUOTA UNLIMITED ON xstream_tbs;
   

   If you are creating an XStream administrator in a CDB, then the XStream administrator must be a common user. Therefore, include the CONTAINER=ALL clause in the CREATE USER statement:

   CREATE USER c##xstrmadmin IDENTIFIED BY password 
     DEFAULT TABLESPACE xstream_tbs
     QUOTA UNLIMITED ON xstream_tbs
     CONTAINER=ALL;
   

   Note:

   Enter an appropriate password for the administrative user.

   See Also:

   Oracle Database Security Guide for guidelines about choosing passwords

4. Grant CREATE SESSION privilege to the XStream administrator.

   If you created a new user to act as the XStream administrator, then grant this user CREATE SESSION privilege.

   For example, to grant CREATE SESSION privilege to user xstrmadmin, run the following statement:

   GRANT CREATE SESSION TO xstrmadmin;
   

   If you are creating an XStream administrator in a CDB, then grant CREATE SESSION privilege and SET CONTAINER privilege to the XStream administrator, and include the CONTAINER=ALL clause in the statement.

   For example, to grant these privileges to user c##xstrmadmin in a CDB, run the following statement:

   GRANT CREATE SESSION, SET CONTAINER TO c##xstrmadmin CONTAINER=ALL;
   

5. Run the GRANT_ADMIN_PRIVILEGE procedure in the DBMS_XSTREAM_AUTH package.

   A user must have been explicitly granted EXECUTE privilege on a package to execute a subprogram in the package inside of a user-created subprogram, and a user must have explicit READ or SELECT privilege on a data dictionary view to query the view inside of a user-created subprogram. These privileges cannot be granted through a role. You can run the GRANT_ADMIN_PRIVILEGE procedure to grant such privileges to the XStream administrator, or you can grant them directly.

   Depending on the parameter settings for the GRANT_ADMIN_PRIVILEGE procedure, it can grant the appropriate privileges for a trusted or untrusted XStream administrator, and it can grant privileges in a non-CDB or a CDB. Table 4-1 describes key parameter settings for each case.

   Table 4-1 Key Parameter Settings for GRANT_ADMIN_PRIVILEGE

   Type of XStream Administrator	grant_select_privileges Parameter Setting	container Parameter Setting
   Trusted in a non-CDB	TRUE	CURRENT (default)
   Untrusted in a non-CDB	FALSE (default)	CURRENT (default)
   Trusted in a CDB	TRUE	ALL
   Untrusted in a CDB	FALSE (default)	ALL

   Note:

   • For any scenario, when the XStream administrator must manage both an XStream Out and an XStream In configuration on the database, specify * for the privilege_type parameter.

   • In a CDB, when ALL is specified for the container parameter, the current container must be the CDB root (CDB$ROOT).

   See Also:

   Oracle Database PL/SQL Packages and Types Reference

6. If necessary, grant additional privileges to the XStream administrator.

   See "Granting Additional Privileges to the XStream Administrator".

7. Repeat all of the previous steps at each Oracle database in the environment that will use XStream.

Grant any of the following additional privileges to the XStream administrator if necessary:

• If you plan to use Oracle Enterprise Manager Cloud Control to manage databases with XStream components, then the XStream administrator must be a trusted user and must be granted DBA role. You must also configure the XStream administrator to be an Oracle Enterprise Manager administrative user. Doing so grants additional privileges required by Oracle Enterprise Manager Cloud Control, such as the privileges required to run Oracle Enterprise Manager Cloud Control jobs. See the Oracle Enterprise Manager Cloud Control online help for information about creating Oracle Enterprise Manager administrative users.

• Grant the privileges for a remote XStream administrator to perform actions in the local database. Grant these privileges using the GRANT_REMOTE_ADMIN_ACCESS procedure in the DBMS_XSTREAM_AUTH package. Grant this privilege if a remote XStream administrator will use a database link that connects to the local XStream administrator to perform administrative actions. Specifically, grant these privileges if either of the following conditions is true:

  • You plan to configure a downstream capture process at a remote downstream database that captures changes originating at the local source database, and the downstream capture process will use a database link to perform administrative actions at the source database.

  • You plan to use a remote XStream administrator to set the instantiation system change number (SCN) values for replicated database objects at the local database.

• Grant the XStream administrator EXECUTE privilege on any PL/SQL function owned by another user that is specified in a custom rule-based transformation for a rule used by a capture process, propagation, or outbound server. For a capture process, if a capture user is specified, then the capture user must have these privileges. These privileges must be granted directly. They cannot be granted through a role.

• Grant the XStream administrator privileges to alter database objects where appropriate. For example, if the XStream administrator must create a supplemental log group for a table in another schema, then the XStream administrator must have the necessary privileges to alter the table. These privileges can be granted directly or through a role.

• If the XStream administrator does not own the queue used by a capture process, propagation, or outbound server, and is not specified as the queue user for the queue when the queue is created, then the XStream administrator must be configured as a secure queue user of the queue if you want the XStream administrator to be able to enqueue LCRs into or dequeue LCRs from the queue. The XStream administrator might also need ENQUEUE or DEQUEUE privileges on the queue, or both.

• Grant the XStream administrator EXECUTE privilege on any object types that the XStream administrator might need to access. These privileges can be granted directly or through a role.

• If you are using Oracle Database Vault, then the XStream administrator must be granted the DV_XSTREAM_ADMIN role to perform the following tasks: create a capture process, create an outbound server, and modify the capture user for a capture process. When the XStream administrator is not performing these tasks, you can revoke DV_XSTREAM_ADMIN role from the XStream administrator.

  In addition, the user who performs the following actions must be granted the BECOME USER system privilege:

  • Creates or alters a capture process

  • Creates or alters an outbound server

  Granting the BECOME USER system privilege to the user who performs these actions is not required if Oracle Database Vault is not installed. You can revoke the BECOME USER system privilege from the user after the completing one of these actions, if necessary.

  See Oracle Database Vault Administrator’s Guide.

Network connectivity and database links are not required when all of the components run on the same database. These components include the capture process, queue, and outbound server.

You must configure network connectivity and database links if you decided to configure XStream in either of the following ways:

• The capture process and the outbound server will run on different databases.

• Downstream capture will be used.

See "Decide How to Configure XStream Out" for more information about these decisions.

If network connectivity is required, then configure your network and Oracle Net so that the databases can communicate with each other.

The following database links are required:

• When the capture process runs on a different database from the outbound server, create a database link from the capture database to the outbound server database. A propagation uses this database link to send changes from the capture database to the outbound server database.

• When you use downstream capture, create a database link from the capture database to the source database. The source database is the database that generates the redo data that the capture process uses to capture changes. The capture process uses this database link to perform administrative tasks at the source database.

The name of each database link must match the global name of the destination database, and each database link should be created in the XStream administrator's schema.

For example, assume that you want to create a database link in a configuration with the following characteristics:

• The global name of the source database is dbs1.example.com.

• The global name of the destination database is dbs2.example.com.

• The XStream administrator is xstrmadmin at each database.

Given these assumptions, the following statement creates a database link from dbs1.example.com to dbs2.example.com:

CONNECT xstrmadmin@dbs1.example.com
Enter password: password

CREATE DATABASE LINK dbs2.example.com CONNECT TO xstrmadmin 
   IDENTIFIED BY password USING 'dbs2.example.com';

For downstream capture processes, the downstream database also must be in ARCHIVELOG mode if you plan to configure a real-time downstream capture process. The downstream database does not need to be in ARCHIVELOG mode if you plan to run only archived-log downstream capture processes on it.

If you are configuring XStream in an Oracle Real Application Clusters (Oracle RAC) environment, then the archived redo log files of all threads from all instances must be available to any instance running a capture process. This requirement pertains to both local and downstream capture processes.

The following requirements apply to XStream outbound servers:

• Ensure that the PROCESSES initialization parameter is set to a value large enough to accommodate the outbound server background processes and all of the other Oracle Database background processes.

• Ensure that the SESSIONS initialization parameter is set to a value large enough to accommodate the sessions used by the outbound server background processes and all of the other Oracle Database sessions.

The Streams pool stores buffered queue LCRs in memory, and it provides memory for capture processes and outbound servers.

The following are considerations for configuring the Streams pool:

• At least 300 MB of memory is required for the Streams pool.

• After XStream Out is configured, you can use the max_sga_size capture process parameter to control the amount of system global area (SGA) memory allocated specifically to a capture process.

  The sum of system global area (SGA) memory allocated for all components on a database must be less than the value set for the STREAMS_POOL_SIZE initialization parameter.

• After XStream Out is configured, you can use the max_sga_size apply parameter to control the amount of SGA memory allocated specifically to an outbound server.

• Ensure that there is enough space in the Streams pool at each database to run XStream components and to store LCRs and run the components properly.

• The Streams pool is initialized the first time an outbound server is started.

• The best practice is to set the STREAMS_POOL_SIZE initialization parameter explicitly to the desired Streams pool size.

The Automatic Shared Memory Management feature automatically manages the size of the Streams pool when the following conditions are met:

• The MEMORY_TARGET and MEMORY_MAX_TARGET initialization parameters are both set to 0 (zero).

• The SGA_TARGET initialization parameter is set to a nonzero value.

The Streams pool size is the value specified by the STREAMS_POOL_SIZE parameter, in bytes, if the following conditions are met:

• The MEMORY_TARGET, MEMORY_MAX_TARGET, and SGA_TARGET initialization parameters are all set to 0 (zero).

• The STREAMS_POOL_SIZE initialization parameter is set to a nonzero value.

If you are using Automatic Shared Memory Management, and if the STREAMS_POOL_SIZE initialization parameter also is set to a nonzero value, then Automatic Shared Memory Management uses this value as a minimum for the Oracle Replication pool. If your environment needs a minimum amount of memory in the Oracle Replication pool to function properly, then you can set a minimum size. To view the current memory allocated to Oracle Replication pool by Automatic Shared Memory Management, query the V$SGA_DYNAMIC_COMPONENTS view. In addition, you can query the V$STREAMS_POOL_STATISTICS view to view the current usage of the Oracle Replication pool.

See "Decide How to Configure XStream Out" for information about this decision.

The steps in this section configure the source database to transfer its redo log files to the capture database and configure the capture database to accept these redo log files.

To configure log file transfer to a downstream database:

1. Configure Oracle Net so that the source database can communicate with the downstream database.

   See Also:

   Oracle Database Net Services Administrator's Guide

2. Configure authentication at both databases to support the transfer of redo data.

   Redo transport sessions are authenticated using either the Secure Sockets Layer (SSL) protocol or a remote login password file. If the source database has a remote login password file, then copy it to the appropriate directory on the downstream capture database system. The password file must be the same at the source database and the downstream capture database.

   See Also:

   Oracle Data Guard Concepts and Administration for detailed information about authentication requirements for redo transport

3. At the source database, set the following initialization parameters to configure redo transport services to transmit redo data from the source database to the downstream database:

   • LOG_ARCHIVE_DEST_n - Configure at least one LOG_ARCHIVE_DEST_n initialization parameter to transmit redo data to the downstream database. Set the following attributes of this parameter in the following way:

     • SERVICE - Specify the network service name of the downstream database.

     • ASYNC or SYNC - Specify a redo transport mode.

       The advantage of specifying ASYNC is that it results in little or no effect on the performance of the source database. ASYNC is recommended to avoid affecting source database performance if the downstream database or network is performing poorly.

       The advantage of specifying SYNC is that redo data is sent to the downstream database faster than when ASYNC is specified. Also, specifying SYNC AFFIRM results in behavior that is similar to MAXIMUM AVAILABILITY standby protection mode. Note that specifying an ALTER DATABASE STANDBY DATABASE TO MAXIMIZE AVAILABILITY SQL statement has no effect on an XStream capture process.

     • NOREGISTER - Specify this attribute so that the location of the archived redo log files is not recorded in the downstream database control file.

     • VALID_FOR - Specify either (ONLINE_LOGFILE,PRIMARY_ROLE) or (ONLINE_LOGFILE,ALL_ROLES).

     • TEMPLATE - If you are configuring an archived-log downstream capture process, then specify a directory and format template for archived redo logs at the downstream database. The TEMPLATE attribute overrides the LOG_ARCHIVE_FORMAT initialization parameter settings at the downstream database. The TEMPLATE attribute is valid only with remote destinations. Ensure that the format uses all of the following variables at each source database: %t, %s, and %r.

       Do not specify the TEMPLATE attribute if you are configuring a real-time downstream capture process.

     • DB_UNIQUE_NAME - The unique name of the downstream database. Use the name specified for the DB_UNIQUE_NAME initialization parameter at the downstream database.

     The following example is a LOG_ARCHIVE_DEST_n setting that specifies the downstream database dbs2 for a real-time downstream capture process:

     LOG_ARCHIVE_DEST_2='SERVICE=DBS2.EXAMPLE.COM ASYNC NOREGISTER
        VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
        DB_UNIQUE_NAME=dbs2'
     

     The following example is a LOG_ARCHIVE_DEST_n setting that specifies the downstream database dbs2 for an archived-log downstream capture process:

     LOG_ARCHIVE_DEST_2='SERVICE=DBS2.EXAMPLE.COM ASYNC NOREGISTER
        VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
        TEMPLATE=/usr/oracle/log_for_dbs1/dbs1_arch_%t_%s_%r.log
        DB_UNIQUE_NAME=dbs2'
     

     See "Decide How to Configure XStream Out" for information about the differences between real-time and archived-log downstream capture.

     Tip:

     If you are configuring an archived-log downstream capture process, then specify a value for the TEMPLATE attribute that keeps log files from a remote source database separate from local database log files. In addition, if the downstream database contains log files from multiple source databases, then the log files from each source database should be kept separate from each other.

   • LOG_ARCHIVE_DEST_STATE_n - Set this initialization parameter that corresponds with the LOG_ARCHIVE_DEST_n parameter for the downstream database to ENABLE.

     For example, if the LOG_ARCHIVE_DEST_2 initialization parameter is set for the downstream database, then set the LOG_ARCHIVE_DEST_STATE_2 parameter in the following way:

     LOG_ARCHIVE_DEST_STATE_2=ENABLE 
     

   • LOG_ARCHIVE_CONFIG - Set the DB_CONFIG attribute in this initialization parameter to include the DB_UNIQUE_NAME of the source database and the downstream database.

     For example, if the DB_UNIQUE_NAME of the source database is dbs1, and the DB_UNIQUE_NAME of the downstream database is dbs2, then specify the following parameter:

     LOG_ARCHIVE_CONFIG='DG_CONFIG=(dbs1,dbs2)'
     

     By default, the LOG_ARCHIVE_CONFIG parameter enables a database to both send and receive redo.

   See Also:

   Oracle Database Reference and Oracle Data Guard Concepts and Administration for more information about these initialization parameters

4. At the downstream database, set the DB_CONFIG attribute in the LOG_ARCHIVE_CONFIG initialization parameter to include the DB_UNIQUE_NAME of the source database and the downstream database.

   For example, if the DB_UNIQUE_NAME of the source database is dbs1, and the DB_UNIQUE_NAME of the downstream database is dbs2, then specify the following parameter:

   LOG_ARCHIVE_CONFIG='DG_CONFIG=(dbs1,dbs2)'
   

   By default, the LOG_ARCHIVE_CONFIG parameter enables a database to both send and receive redo.

5. If you reset any initialization parameters while the instance was running at a database in Step 3 or Step 4, then you might want to reset them in the initialization parameter file as well, so that the new values are retained when the database is restarted.

   If you did not reset the initialization parameters while the instance was running, but instead reset them in the initialization parameter file in Step 3 or Step 4, then restart the database. The source database must be open when it sends redo log files to the downstream database, because the global name of the source database is sent to the downstream database only if the source database is open.

When these steps are complete, you can add standby redo logs files at the downstream database if you want to configure a real-time downstream capture process. In this case, see the instructions in "If Required, Add Standby Redo Logs for Real-Time Downstream Capture".

See "Decide How to Configure XStream Out" for information about this decision.

The example in this section adds standby redo logs at a downstream database. Standby redo logs are required to configure a real-time downstream capture process. In the example, the source database is dbs1.example.com and the downstream database is dbs2.example.com

The steps in this section are required only if you are configuring real-time downstream capture. If you are configuring archived-log downstream capture, then do not complete the steps in this section.

To add standby redo logs for real-time downstream capture:

1. Complete the steps in "If Required, Configure Log File Transfer to a Downstream Database".

2. At the downstream database, set the following initialization parameters to configure archiving of the redo data generated locally:

   • Set at least one archive log destination in the LOG_ARCHIVE_DEST_n initialization parameter either to a directory or to the fast recovery area on the computer system running the downstream database. Set the following attributes of this parameter in the following way:

     • LOCATION - Specify either a valid path name for a disk directory or, to use a fast recovery area, specify USE_DB_RECOVERY_FILE_DEST. This location is the local destination for archived redo log files written from the standby redo logs. Log files from a remote source database should be kept separate from local database log files. See Oracle Database Backup and Recovery User’s Guide for information about configuring a fast recovery area.

     • VALID_FOR - Specify either (ONLINE_LOGFILE,PRIMARY_ROLE) or (ONLINE_LOGFILE,ALL_ROLES).

     The following example is a LOG_ARCHIVE_DEST_n setting for the locally generated redo data at the real-time downstream capture database:

     LOG_ARCHIVE_DEST_1='LOCATION=/home/arc_dest/local_rl_dbs2
        VALID_FOR=(ONLINE_LOGFILE,PRIMARY_ROLE)'
     

     A real-time downstream capture configuration should keep archived standby redo log files separate from archived online redo log files generated by the downstream database. Specify ONLINE_LOGFILE instead of ALL_LOGFILES for the redo log type in the VALID_FOR attribute to accomplish this.

     You can specify other attributes in the LOG_ARCHIVE_DEST_n initialization parameter if necessary.

   • Set the LOG_ARCHIVE_DEST_STATE_n initialization parameter that corresponds with the LOG_ARCHIVE_DEST_n parameter previously set in this step to ENABLE.

     For example, if the LOG_ARCHIVE_DEST_1 initialization parameter is set, then set the LOG_ARCHIVE_DEST_STATE_1 parameter in the following way:

     LOG_ARCHIVE_DEST_STATE_1=ENABLE 
     

3. At the downstream database, set the following initialization parameters to configure the downstream database to receive redo data from the source database and write the redo data to the standby redo log at the downstream database:

   • Set at least one archive log destination in the LOG_ARCHIVE_DEST_n initialization parameter either to a directory or to the fast recovery area on the computer system running the downstream database. Set the following attributes of this parameter in the following way:

     • LOCATION - Specify either a valid path name for a disk directory or, to use a fast recovery area, specify USE_DB_RECOVERY_FILE_DEST. This location is the local destination for archived redo log files written from the standby redo logs. Log files from a remote source database should be kept separate from local database log files. See Oracle Database Backup and Recovery User’s Guide for information about configuring a fast recovery area.

     • VALID_FOR - Specify either (STANDBY_LOGFILE,PRIMARY_ROLE) or (STANDBY_LOGFILE,ALL_ROLES).

     The following example is a LOG_ARCHIVE_DEST_n setting for the redo data received from the source database at the real-time downstream capture database:

     LOG_ARCHIVE_DEST_2='LOCATION=/home/arc_dest/srl_dbs1
        VALID_FOR=(STANDBY_LOGFILE,PRIMARY_ROLE)'
     

     You can specify other attributes in the LOG_ARCHIVE_DEST_n initialization parameter if necessary.

   • Set the LOG_ARCHIVE_DEST_STATE_n initialization parameter that corresponds with the LOG_ARCHIVE_DEST_n parameter previously set in this step to ENABLE.

     For example, if the LOG_ARCHIVE_DEST_2 initialization parameter is set for the downstream database, then set the LOG_ARCHIVE_DEST_STATE_2 parameter in the following way:

     LOG_ARCHIVE_DEST_STATE_2=ENABLE 
     

   See Also:

   Oracle Database ReferenceandOracle Data Guard Concepts and Administrationfor more information about these initialization parameters

4. If you reset any initialization parameters while an instance was running at a database in Step 2 or Step 3, then you might want to reset them in the relevant initialization parameter file as well, so that the new values are retained when the database is restarted.

   If you did not reset the initialization parameters while an instance was running, but instead reset them in the initialization parameter file in Step 2 or Step 3, then restart the database. The source database must be open when it sends redo data to the downstream database, because the global name of the source database is sent to the downstream database only if the source database is open.

5. Create the standby redo log files.

   Note:

   The following steps outline the general procedure for adding standby redo log files to the downstream database. The specific steps and SQL statements used to add standby redo log files depend on your environment. For example, in an Oracle Real Application Clusters (Oracle RAC) environment, the steps are different. See Oracle Data Guard Concepts and Administration for detailed instructions about adding standby redo log files to a database.

   1. In SQL*Plus, connect to the source database dbs1.example.com as an administrative user.

      See Oracle Database Administrator’s Guide for information about connecting to a database in SQL*Plus.

   2. Determine the log file size used on the source database. The standby log file size must exactly match (or be larger than) the source database log file size. For example, if the source database log file size is 500 MB, then the standby log file size must be 500 MB or larger. You can determine the size of the redo log files at the source database (in bytes) by querying the V$LOG view at the source database.

      For example, query the V$LOG view:

      SELECT BYTES FROM V$LOG;
      

   3. Determine the number of standby log file groups required on the downstream database.

      The number of standby log file groups must be at least one more than the number of online log file groups on the source database. For example, if the source database has two online log file groups, then the downstream database must have at least three standby log file groups.

      You can determine the number of source database online log file groups by querying the V$LOG view of the source database for a single instance database or by querying the GV$LOG view for a database cluster.

      For example, query the GV$LOG view:

      SELECT COUNT(GROUP#) FROM GV$LOG;
      

   4. In SQL*Plus, connect to the downstream database dbs2.example.com as an administrative user.

   5. Use the SQL statement ALTER DATABASE ADD STANDBY LOGFILE to add the standby log file groups to the downstream database.

      For example, assume that the source database has two online redo log file groups and is using a log file size of 500 MB. In this case, use the following statements to create the appropriate standby log file groups:

      ALTER DATABASE ADD STANDBY LOGFILE GROUP 3
         ('/oracle/dbs/slog3a.rdo', '/oracle/dbs/slog3b.rdo') SIZE 500M;
      
      ALTER DATABASE ADD STANDBY LOGFILE GROUP 4
         ('/oracle/dbs/slog4.rdo', '/oracle/dbs/slog4b.rdo') SIZE 500M;
      
      ALTER DATABASE ADD STANDBY LOGFILE GROUP 5
         ('/oracle/dbs/slog5.rdo', '/oracle/dbs/slog5b.rdo') SIZE 500M;
      

   6. Ensure that the standby log file groups were added successfully by running the following query:

      SELECT GROUP#, THREAD#, SEQUENCE#, ARCHIVED, STATUS
         FROM V$STANDBY_LOG;
      

      You output should be similar to the following:

          GROUP#    THREAD#  SEQUENCE# ARC STATUS
      ---------- ---------- ---------- --- ----------
               3          0          0 YES UNASSIGNED
               4          0          0 YES UNASSIGNED
               5          0          0 YES UNASSIGNED
      

   7. Ensure that log files from the source database are appearing in the location specified in the LOCATION attribute in Step 3. You might need to switch the log file at the source database to see files in the directory.

When these steps are complete, you are ready to configure a real-time downstream capture process.

Prerequisites

Before configuring XStream Out, ensure that all containers in the CDB are in open read/write mode during XStream Out configuration.

Assumptions

This section makes the following assumptions:

• The capture process will be a local capture process, and it will run on the same database as the outbound server.

• The name of the outbound server is xout.

• Data manipulation language (DML) and data definition language (DDL) changes made to the oe.orders and oe.order_items tables in PDB pdb1.example.com are sent to the outbound server.

• DML and DDL changes made to the hr schema in the PDB pdb1.example.com are sent to the outbound server.

Figure 4-8 provides an overview of this XStream Out configuration.

Figure 4-8 Sample XStream Out Configuration Created Using CREATE_OUTBOUND for a PDB

Description of "Figure 4-8 Sample XStream Out Configuration Created Using CREATE_OUTBOUND for a PDB"

To create an outbound server using the CREATE_OUTBOUND procedure:

1. In SQL*Plus, connect to the root in the CDB (not to the PDB pdb1.example.com) as the XStream administrator.

2. Create the outbound server and other XStream components.

   1. Ensure that all containers in the source CDB are in open read/write mode.

   2. Run the CREATE_OUTBOUND procedure.

      Given the assumptions for this example, run the following CREATE_OUTBOUND procedure:

      DECLARE
        tables  DBMS_UTILITY.UNCL_ARRAY;
        schemas DBMS_UTILITY.UNCL_ARRAY;
      BEGIN
          tables(1)  := 'oe.orders';
          tables(2)  := 'oe.order_items';
          schemas(1) := 'hr';
        DBMS_XSTREAM_ADM.CREATE_OUTBOUND(
          server_name     =>  'xout',
          source_database =>  'pdb1.example.com',
          table_names     =>  tables,
          schema_names    =>  schemas);
      END;
      /
      

      Note:

      To capture changes in all containers in a CDB, including the CDB root, all PDBs, all application roots, and all application PDBs, and send those changes to the XStream client application, you can omit the source_database parameter when you run the CREATE_OUTBOUND procedure.

   3. After the CREATE_OUTBOUND procedure completes successfully, optionally change the open mode of one or more containers if necessary.

   Running the procedure in Step b performs the following actions:

   • Configures supplemental logging for the oe.orders and oe.order_items tables and for all tables in the hr schema in the pdb1.example.com PDB.

   • Creates a queue with a system-generated name that is used by the capture process and the outbound server.

   • Creates and starts a capture process with a system-generated name with rule sets that instruct it to capture DML and DDL changes to the oe.orders table, the oe.order_items table, and the hr schema from the pdb1.example.com PDB.

   • Creates and starts an outbound server named xout with rule sets that instruct it to send DML and DDL changes to the oe.orders table, the oe.order_items table, and the hr schema to the client application.

   • Sets the current user as the connect user for the outbound server. In this example, the current user is the XStream administrator. The client application must connect to the database as the connect user to interact with the outbound server.

   Note:

   The server_name value cannot exceed 30 bytes.

   Tip:

   To capture and send all database changes from the pdb1.example.com database to the outbound server, specify NULL (the default) for the table_names and schema_names parameters.

3. Create and run the client application that will connect to the outbound server in the root of the CDB and receive the LCRs.

   When you run the client application, the outbound server is started automatically.

Prerequisites

Before configuring XStream Out, the following prerequisites must be met:

• Ensure that all containers in the CDB are in open read/write mode during XStream Out configuration.

• This example uses downstream capture. Therefore, you must configure log file transfer from the source database to a downstream database.

• If you want to use real-time downstream capture, then you must also add the required standby redo logs.

Assumptions

This section makes the following assumptions:

• The name of the outbound server is xout.

• The queue used by the outbound server is c##xstrmadmin.xstream_queue.

• The source database is the PDB pdb1.example.com in the CDB data.example.com.

• The capture process runs in the CDB capture.example.com.

• The outbound server runs in the CDB capture.example.com.

• DML and DDL changes made to the oe.orders and oe.order_items tables from the PDB pdb1.example.com are sent to the outbound server.

• DML and DDL changes made to the hr schema from the PDB pdb1.example.com are sent to the outbound server.

The following figure gives an overview of this XStream Out configuration.

Figure 4-9 Sample XStream Out Configuration Using Multiple CDBs and Downstream Capture

Description of "Figure 4-9 Sample XStream Out Configuration Using Multiple CDBs and Downstream Capture "

To configure XStream Out with downstream capture in CDBs:

1. In SQL*Plus, connect to the root of the downstream capture CDB as the XStream administrator.

   In this example. the downstream capture CDB is capture.example.com.

2. Create the queue that will be used by the capture process.

   For example, run the following procedure:

   BEGIN
     DBMS_XSTREAM_ADM.SET_UP_QUEUE(
       queue_table => 'c##xstrmadmin.xstream_queue_table',
       queue_name  => 'c##xstrmadmin.xstream_queue');
   END;
   /
   

3. Optionally, create the database link from the root in the downstream capture CDB to the root in the source CDB.

   In this example, create a database link from the root in capture.example.com to the root in data.example.com. For example, if the user c##xstrmadmin is the XStream administrator on both databases, then create the following database link:

   CREATE DATABASE LINK data.example.com CONNECT TO c##xstrmadmin 
      IDENTIFIED BY password USING 'data.example.com';
   

4. Ensure that all containers in the source CDB are in open read/write mode.

5. If you did not create the database link in Step 3, then you must complete additional steps in the root of the source CDB.

   These steps are not required if you created the database link in Step 3.

   Run the BUILD procedure and ensure that required supplemental logging is specified for the database objects in the source CDB:

   1. Connect to the root in the source CDB as the XStream administrator.

   2. Run the DBMS_CAPTURE_ADM.BUILD procedure. For example:

      SET SERVEROUTPUT ON
      DECLARE
        scn  NUMBER;
      BEGIN
        DBMS_CAPTURE_ADM.BUILD(
          first_scn => scn);
        DBMS_OUTPUT.PUT_LINE('First SCN Value = ' || scn);
      END;
      /
      First SCN Value = 409391
      

      This procedure displays the valid first SCN value for the capture process that will be created in the root in the capture.example.com CDB. Make a note of the SCN value returned because you will use it when you create the capture process in Step 6.

   3. Ensure that required supplemental logging is specified for the database objects in the source CDB.

      For this example, ensure that supplemental logging is configured for the hr schema, the oe.orders table, and the oe.order_items table in the pdb1.example.com PDB.

6. While connected to the root in the downstream capture CDB, create the capture process.

   For example, run the following procedure to create the capture process while connected as the XStream administrator to capture.example.com:

   BEGIN
     DBMS_CAPTURE_ADM.CREATE_CAPTURE(
       queue_name         => 'c##xstrmadmin.xstream_queue',
       capture_name       => 'real_time_capture',
       rule_set_name      => NULL,
       start_scn          => NULL,
       source_database    => NULL,
       use_database_link  => TRUE,
       first_scn          => NULL,
       logfile_assignment => 'implicit',
       source_root_name   => 'data.example.com',
       capture_class      => 'xstream');
   END;
   /
   

   If you did not create a database link in Step 3, then specify the SCN value returned by the DBMS_CAPTURE_ADM.BUILD procedure for the first_scn parameter.

   Do not start the capture process.

7. After the capture process is created, optionally change the open mode of one or more PDBs if necessary.

8. Run the ADD_OUTBOUND procedure.

   Given the assumption for this section, run the following ADD_OUTBOUND procedure:

   DECLARE
     tables  DBMS_UTILITY.UNCL_ARRAY;
     schemas DBMS_UTILITY.UNCL_ARRAY;
   BEGIN
       tables(1)  := 'oe.orders';
       tables(2)  := 'oe.order_items';
       schemas(1) := 'hr';
     DBMS_XSTREAM_ADM.ADD_OUTBOUND(
       server_name           =>  'xout',
       queue_name            =>  'c##xstrmadmin.xstream_queue',
       source_database       =>  'pdb1.example.com',
       table_names           =>  tables,
       schema_names          =>  schemas,
       source_root_name      => 'data.example.com',
       source_container_name => 'pdb1');
   END;
   /
   

   Running this procedure performs the following actions:

   • Creates an outbound server named xout. The outbound server has rule sets that instruct it to send DML and DDL changes to the oe.orders table, the oe.order_items table, and the hr schema to the client application. The rules specify that these changes must have originated at the PDB pdb1.example.com in the CDB data.example.com. The outbound server dequeues LCRs from the queue c##xstrmadmin.xstream_queue.

   • Sets the current user as the connect_user for the outbound server. In this example, the current_user is the XStream administrator. The client application must connect to the database as the connect_user to interact with the outbound server.

   Note:

   The server_name value cannot exceed 30 bytes.

9. Create and run the client application that will connect to the outbound server and receive the LCRs.

   When you run the client application, the outbound server is started automatically at the downstream capture CDB.