A Server Control Utility Reference

Use the Server Control Utility (SRVCTL) to manage Oracle Real Application Clusters (Oracle RAC) configuration information.

Note:

SRVCTL commands specific to Oracle Grid Infrastructure administration operations are documented in Oracle Clusterware Administration and Deployment Guide

Note:

A multitenant container database is the only supported architecture in Oracle Database 21c. While the documentation is being revised, legacy terminology may persist. In most cases, "database" and "non-CDB" refer to a CDB or PDB, depending on context. In some contexts, such as upgrades, "non-CDB" refers to a non-CDB from a previous release.

SRVCTL Usage Information

SRVCTL is installed on each node in a cluster by default. To use SRVCTL, log in to the operating system of a node and enter the SRVCTL command and its parameters in case-sensitive syntax.

  • Use the version of SRVCTL that is provided with the current Oracle Database release from the Oracle home of the database that you are managing. The version of SRVCTL must be the same as the version of the object (listeners, Oracle ASM instances, Oracle Database, Oracle Database instances, and Oracle Database services) being managed.

  • SRVCTL does not support concurrent executions of commands on the same object. Therefore, run only one SRVCTL command at a time for each database, service, or other object.

  • When specifying a comma-delimited list as part of a SRVCTL command, there should not be any spaces between the items in the list. For example:

    srvctl add database -serverpool "serverpool1,serverpool3"
    

    When you specify a comma-delimited list in a Windows environment, you must enclose the list in double quotation marks (""). You can enclose a comma-delimited list in double quotation marks in a Linux or UNIX environment but they will be ignored.

  • If you are entering a SRVCTL command, and you want to continue the input on a new line, then you can use the operating system continuation character. In Linux, this is the backslash (\) symbol.

  • A SRVCTL command that produces no output is a successful command. Not all SRVCTL commands return a message when it completes, successfully. However, if a SRVCTL command fails, then it always returns an error message.

  • SRVCTL returns 0 on success, 1 on failure, and 2 on warnings. Some commands, such as start, stop, enable, and disable, can return 2 for a warning when the request would not change anything. In other words, the object of the command is already started, already stopped, already disabled, and so on. In warning cases, SRVCTL also prints a message about what was already done.
  • You can use the -eval parameter with several SRVCTL commands. This parameter, when you use it, enables you to simulate running a command without making any changes to the system. SRVCTL returns output that informs you what will happen if you run a particular command. For example, to know what might happen if you relocate a server:

    $ srvctl relocate server –servers "rac1" –eval –serverpool pool2
    
    Database db1
         will stop on node rac1
         will start on node rac7
         Service mySrv1
              will stop on node rac1, it will not run on any node
         Service myServ2
              will stop on node rac1
              will start on node rac6
    Server rac1
         will be moved from pool myPoolX to pool pool2
    

    The -eval parameter is available with the following commands:

    • srvctl add database

    • srvctl add service

    • srvctl add srvpool

    • srvctl modify database

    • srvctl modify service

    • srvctl modify srvpool

    • srvctl relocate server

    • srvctl relocate service

    • srvctl remove srvpool

    • srvctl start database

    • srvctl start service

    • srvctl stop database

    • srvctl stop service

Specifying Command Parameters as Keywords Instead of Single Letters

The use of single letter commands is deprecated. Oracle recommends that you use full command words with SRVCTL.

In releases earlier than Oracle Database 12c, the SRVCTL command-line interface used single letter parameters. However, single letter parameters impose a limit on the number of unique parameters available for use with SRVCTL commands. SRVCTL command parameters in current Oracle Database releases use full words instead of single letters, such as -multicastport and -subdomain.

To support backward compatibility, you can use a mix of single-letter parameters and new keyword parameters. New parameters introduced with keywords can be used with single letter parameters.

Note:

The use of single letter parameters are deprecated. Oracle recommends that you use the keyword parameters, so that you avoid using the same letter to implement different functionality, depending on the command.

You can obtain the single-letter equivalents, where applicable, by adding the -compatible parameter after the -help parameter.

Character Set and Case Sensitivity of SRVCTL Object Values

SRVCTL interacts with many different types of objects. The character set and name length limitations, and whether the object name is case sensitive, can vary between object types.

Table A-1 String Restrictions for SRVCTL Object Names

Object Type Character Set Limitations Case Sensitive? Maximum Length
db_domain

Alpha-numeric characters, underscore (_), and number sign (#)

No

128 characters

db_unique_name

Alpha-numeric characters, underscore (_), number sign (#), and dollar sign ($); the first 8 characters must be unique because those characters are used to form instance names for policy-managed databases

No

30 characters but the first 8 characters must be unique relative to any other database in the same cluster

pdb_name

Alpha-numeric characters and underscore (_); the first character must be an alphabet character

No

30 characters

diskgroup_name

Naming disk groups have the same limitations as naming other database objects.

No (all names are converted to uppercase)

30 characters but the first 8 characters must be unique relative to any other database in the same cluster

instance_name

Alphanumeric characters

Depends on the platform

15 characters

listener_name

Alphanumeric characters

Depends on the platform

15 characters

node_name

Alphanumeric characters

No

15 characters

scan_name

The first character must be an alphabetic character

No

15 characters

server_pool

Alphanumeric characters, underscore (_), number sign (#), period (.), and dollar sign ($); the name cannot begin with a period, contain single quotation marks (''), nor can the name be "Generic" or "Free" because those two names are reserved for the built-in server pools

No

250 characters

service_name

Alphanumeric characters, underscore (_), number sign (#), period (.), and dollar sign ($); the name cannot begin with a period, contain single quotation marks (''), nor can the name be "Generic" or "Free" because those two names are reserved for the built-in server pools

No

250 characters

volume_name

Alphanumeric characters; dashes (-) are not allowed and the first character must be an alphabetic character.

No

11 characters

Summary of Tasks for Which SRVCTL Is Used

Use SRVCTL to manage databases, instances, cluster databases, cluster database instances, Oracle ASM instances and disk groups, services, listeners, or other clusterware resources.

  • Cluster Database Configuration Tasks

    Tasks Commands

    Add, modify, and delete cluster database configuration information

    srvctl add database

    srvctl modify database

    srvctl remove database

    Add an instance to or delete an instance from the configuration of a cluster database

    srvctl add instance

    srvctl remove instance

    Add a service to or delete a service from the configuration of a cluster database

    srvctl add service

    srvctl remove service

    Move instances and services in a cluster database configuration and modify service configurations

    srvctl relocate database

    srvctl relocate service

    srvctl modify instance

    srvctl modify service

    Set and unset the environment for an instance or service in a cluster database configuration

    srvctl modify instance

    srvctl modify service

    Set and unset the environment for an entire cluster database in a cluster database configuration

    srvctl setenv database

    srvctl unsetenv database

  • General Cluster Database Administration Tasks

    Tasks Commands

    Start and stop cluster databases

    srvctl start database

    srvctl stop database

    Start and stop cluster database instances

    srvctl start instance

    srvctl stop instance

    Start, stop, and relocate cluster database services

    srvctl start service

    srvctl stop service

    srvctl relocate service

    Obtain statuses of cluster databases, cluster database instances, or cluster database services

    srvctl status database

    srvctl status instance

    srvctl status service

  • Node-Level Tasks

    Tasks Commands

    Administering VIPs

    srvctl add vip

    srvctl config vip

    srvctl disable vip

    srvctl enable vip

    srvctl getenv vip

    srvctl modify vip

    srvctl relocate vip

    srvctl remove vip

    srvctl setenv vip

    srvctl start vip

    srvctl status vip

    srvctl stop vip

    srvctl unsetenv vip

    Administering node applications

    srvctl add nodeapps

    srvctl disable nodeapps

    srvctl enable nodeapps

    srvctl getenv nodeapps

    srvctl modify nodeapps

    srvctl remove nodeapps

    srvctl setenv nodeapps

    srvctl unsetenv nodeapps

Using SRVCTL Help

Learn about how to use context sensitive help with SRVCTL commands.

To see help for all SRVCTL commands, from the command line enter:

srvctl -help

To see the command syntax and a list of parameters for each SRVCTL command, from the command line enter:

srvctl command (or verb) object (or noun) -help

When you request online help for a command using -help, SRVCTL prints the full words for each parameter. You can obtain the single-letter equivalents, where applicable, by adding the -compatible parameter after the -help parameter. For example:

$ srvctl config database -help -compatible

The preceding command prints usage information for the srvctl config database command, listing all parameters as full words followed by their single-letter equivalents in parentheses, where applicable.

To see the SRVCTL version number enter:

$ srvctl -version

SRVCTL Privileges and Security

To use SRVCTL to change your Oracle RAC database configuration, log in to the operating system as the software owner of the home that you want to manage.

For example, if different users installed Oracle Database and the Oracle Grid Infrastructure, then log in as the database software owner (for example, ora_db) to manage databases and log in as the Oracle Grid Infrastructure software owner (for example, ora_asm) to manage the Oracle ASM instances.

Users who are members of the OSDBA operating system group can start and stop the database. To stop and start an Oracle ASM instance, you must be a member of the OSASM operating system group.

To create or register objects such as listeners, Oracle Notification Services, and services, you must be logged in to the operating system as the software owner of the Oracle home. The objects you create or register for that Oracle home will run under the user account of the owner of the Oracle home. Databases run as the database installation owner of the home from which they run.

To perform srvctl add operations on any object, you must be logged in as the Oracle account owner of the home on which the object runs.

For some SRVCTL commands, to run the commands on Linux and Unix systems, you must be logged in as root, and on Windows systems, you must be logged in as a user with Administrator privileges. In this appendix, those commands are preceded by the root prompt (#) in the command examples.

Additional SRVCTL Topics

You can use SRVCTL to manage Oracle-supplied resources, but Oracle strongly advises you to follow the guidelines provided here.

  • Use SRVCTL to manage Oracle-supplied resources such as listener, instances, disk groups, and networks, and CRSCTL for managing Oracle Clusterware and its resources.

    Caution:

    Oracle strongly discourages you from using CRSCTL to directly manipulate Oracle-supplied resources (resources whose names begin with ora). Making manual changes to Oracle resources using CRSCTL can adversely affect the cluster configuration.

  • Although you may be able to cancel running SRVCTL commands by pressing the Control-C keys, Oracle strongly advises that you do not attempt to do this, because you can corrupt your configuration data by doing this.

    Do not to attempt to terminate SRVCTL in this manner.

Deprecated SRVCTL Subprograms or Commands

Oracle recommends that you use alternatives for several SRVCTL commands and parameters deprecated with Oracle Database 12c.

Single Character Parameters Deprecated for all SRVCTL Commands

Single-character parameters were deprecated in Oracle Database 12c. Use the full keyword for each parameter. Refer to the information here to understand how to update scripts using single-character parameters.

Oracle recommends that you use the full keyword for each SRVCTL parameter. To support older tools and scripts that still use single-character parameters, the current version of SRVCTL continues to support both single-character parameters and full keyword parameters. However, deprecated functionality can be desupported in a future release.

The command reference topics for SRVCTL show the keywords for each SRVCTL command. The following table lists the deprecated single-character parameters.

Table A-2 Deprecated Single-Character Parameters for SRVCTL Commands

Single Letter Long Form Values Description Related Commands
A address {VIP_name | IP}/netmask/ [if1[|if2...]]

VIP address specification for node applications

Node applications, VIP, network, Listener, SCAN VIP, and SCAN listener commands

a all

 none

All resources of that kind

srvctl config database

Common

a diskgroup diskgroup_list

Comma-delimited list of Oracle ASM disk groups

Database, instance, Oracle ASM, disk group, and file system commands

a detail

None

Print detailed configuration information

Common

a available available_list

A comma-delimited list of available instances

Service and server pool commands

a abort

None

Abort failed online relocation

Relocate database

a viponly

None

Display VIP configuration

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

B rlbgoal {NONE| SERVICE_TIME| THROUGHPUT}

The runtime load balancing goal of a service

Service and server pool commands

c currentnode current_node

Node name from which to relocate the service

Service and server pool commands

c cardinality {UNIFORM| SINGLETON}

Whether the service should run on every active server in the server pool (UNIFORM) or just one server (SINGLETON)

Service and server pool commands

c dbtype type

Type of database: Oracle RAC One Node, Oracle RAC, or single instance

Database, instance, Oracle ASM, disk group, and file system commands

d db or database db_unique_name

Database unique name

Common

d device volume_device

Volume device path

Database, instance, Oracle ASM, disk group, and file system commands

d domain

None

Display subdomain served by GNS

OC4J, home, CVU, and GNS commands

e emport em_port_number

Local listen port for Oracle Enterprise Manager

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

e failovertype {NONE|SESSION BASIC|TRANSACTION}

The failover type for a service

Service and server pool commands

e server server_list

Candidate server list for Oracle RAC One Node database

Database, instance, Oracle ASM, disk group, and file system commands

f force

None

Force remove

Common

g diskgroup diskgroup_name

Disk group name

File system, Diskgroup commands

g gsdonly

None

Display GSD configuration

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

g serverpool server_pool_name server_pool_list

A server pool name

Comma-delimited list of database server pool names

Service and server pool commands

Database, instance, Oracle ASM, disk group, and file system commands

h help

None

None

Common

i importance number

A number that represents the importance of the server pool

Service and server pool commands

i instance instance_name instance_list

Instance name prefix for administrator-managed Oracle RAC One Node database

A comma-delimited list of instance names

Database, instance, Oracle ASM, disk group, and file system commands

I ip ip_address

VIP address on which GNS is to listen

OC4J, home, CVU, and GNS commands

i oldinst instance_name

The old instance name

Service and server pool commands

i scannumber scan_ordinal _number

Ordinal number of the IP address for the SCAN

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

i vip vip_name or "vip_name_list"

VIP names

Node applications, GNS, VIP, network, listener, SCAN VIP, and SCAN listener commands

j acfspath acfs_path_list

Comma-delimited list of Oracle ACFS paths where the dependency on the database will be set

Database, instance, Oracle ASM, disk group, and file system commands

j clbgoal {SHORT|LONG}

The connection load balancing goal for a service

Service and server pool commands

k netnum network_number

The network number

Service and server pool commands

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

OC4J, home, CVU, and GNS commands

l list

 

List all records in GNS

OC4J, home, CVU, and GNS commands

l listener

listener_name

The name of a listener

ASM commands

l loglevel log_level

Specify the level (0-6) of logging that GNS should run with

OC4J, home, CVU, and GNS commands

l min number

The minimum size of the server pool

Service and server pool commands

l onslocalport port_number

Oracle Notification Service listening port for local client connections

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

l role service_role

Comma-delimited list of server roles within double quotation marks (""), where each role is one of PRIMARY, PHYSICAL_STANDBY, LOGICAL_STANDBY, or SNAPSHOT_STANDBY

Service and server pool commands

m domain domain_name

The domain for the database

Database, instance, Oracle ASM, disk group, and file system commands

m

failovermethod {NONE|BASIC}

The failover method of a service

Service and server pool commands

m multicastpost

 

The port on which the GNS daemon is listening for multicast requests

OC4J, home, CVU, and GNS commands

m path mountpoint_path

Mountpoint path

Database, instance, Oracle ASM, disk group, and file system commands

n name

 

Advertise a name through GNS using the given address

OC4J, home, CVU, and GNS commands

n node node_name

The name of a specific node

Common

n nodes node_list

A comma-delimited list of node names

File system commands

n dbname database_name

The database name (DB_NAME), if different from the unique name specified by the -db parameter

Database, instance, Oracle ASM, disk group, and file system commands

n scanname scan_name

Fully-qualified SCAN name (includes the domain)

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

n servers server_list

A comma-delimited list of candidate server names

Service and server pool commands

n targetnode node_name

Node name to which to relocate the service

Service and server pool commands

o oraclehome oracle_home

$ORACLE_HOME path

Database commands

p endpoints [TCP:]port _number[/IPC: key][/NMP:pipe _name][/TCPS: s_port][/SDP: port]

SCAN listener endpoints

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

p port

 

The port which the GNS daemon uses to communicate with the DNS server

OC4J, home, CVU, and GNS commands

p rmiport port_number

OC4J RMI port number

OC4J, home, CVU, and GNS commands

P tafpolicy {NONE|BASIC}

TAF policy specification

Service and server pool commands

p spfile spfile_location

Server parameter file path

Database, instance, Oracle ASM, disk group, and file system commands

q notification {TRUE|FALSE}

Whether FAN is enabled for OCI connections

Service commands

q query

 

Query GNS for the records belonging to a name

OC4J, home, CVU, and GNS commands

r preferred preferred_list

A comma-delimited list of preferred instances

Service and server pool commands

r onsremoteport port_number

Oracle Notification Service listening port for connections from remote hosts

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

r relocate

 

Relocate the VIP

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

r revert

None

Remove target node of failed online relocation request from the candidate server list of administrator-managed Oracle RAC One Node database

Relocate database

r role role_type

Role of the standby database: PRIMARY, PHYSICAL_STANDBY, LOGICAL_STANDBY, or SNAPSHOT_STANDBY

Database, instance, Oracle ASM, disk group, and file system commands

s onsonly

 

Display Oracle Notification Service daemon configuration

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

s skip

None

Skip checking the ports

Listener, SCAN, and SCAN listener.

s statfile file_name

The file path of the state_file created by a previously executed srvctl stop home command

OC4J, home, CVU, and GNS commands

s status

 

Display the status of GNS

OC4J, home, CVU, and GNS commands

S subnet subnet/net _mask/[if1[| if2...]]

Network address specification for a network

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

s service service_name service_name_list

The name of a service

A comma-delimited list of service names

Service and server pool commands

s startoption start_options

Startup options for the database (mount, open, read only)

Database, instance, Oracle ASM, disk group, and file system commands

t checkinterval time_interval

Interval in minutes between checks

OC4J, home, CVU, and GNS commands

t edition edition_name

The initial session edition of a service

Service and server pool commands

t envs "name_list"

A list of environment variables

Common

t namevals "name= value,..."

Names and values of environment variables

Common

T nameval "name=value"

Name and value of a single environment variable

Common

t update instance_name

The new instance name

Service and server pool commands

t remoteservers host_name[: port_number] [,host_name[: port_number]...]

List of remote host name and port number pairs for Oracle Notification Service daemons outside this cluster

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

t stopoption stop_options

Stop options for the database (NORMAL, TRANSACTIONAL, IMMEDITATE, or ABORT)

Database, instance, Oracle ASM, disk group, and file system commands

t toversion target_version

Version to which you are downgrading

Database, instance, Oracle ASM, disk group, and file system commands

u max number

Maximum size of the server pool

Service and server pool commands

u nettype network_type

The network server type, which can be STATIC, DHCP, or MIXED

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

u newinst

None

Add a new instance to the service configuration

Service commands

u update

 

Update SCAN listeners to match the number of SCAN VIPs

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

u user oracle_user

Oracle user or other authorized user to mount and unmount file systems

Database, instance, Oracle ASM, disk group, and file system commands

v verbose

 

Verbose output

Common

v volume volume_name

Name of a volume

Database, instance, Oracle ASM, disk group, and file system commands

V versions

 

 

Common

w failoverdelay number

Failover delay

Service and server pool commands

w nettype network_type

The network server type, which can be STATIC, DHCP, or MIXED

Node applications, VIP, network, listener, SCAN VIP, and SCAN listener commands

w timeout timeout

Online relocation timeout in minutes

Database, instance, Oracle ASM, disk group, and file system commands

x dtp {TRUE | FALSE}

Whether to enable distributed transaction processing

Service and server pool commands

x node node_name

Node name (use this parameter only with noncluster databases)

Common

y noprompt

 

Suppress the confirmation prompt

Common

y policy {AUTOMATIC | MANUAL}

Management policy for the resource

Database, instance, Oracle ASM, disk group, file system, service and server pool commands

z failoverretry number

Number of failover retries

Service and server pool commands

z rmdepondisk

 

To remove a database's dependency upon disk groups

Database, instance, Oracle ASM, disk group, and file system commands

Miscellaneous SRVCTL Commands and Parameters

If you have scripts dating from Oracle Database 12.2 or earlier releases, then Oracle recommends that you review the deprecated parameters and update your usage to current forms.

The following command parameters were deprecated in Oracle Database 12c:

Table A-3 Deprecated Commands and Parameters for SRVCTL

Command Deprecated Parameters
srvctl modify asm

-node node_name

srvctl modify instance

-z

Instead, use the -node option with the value set to ""

srvctl modify gns

[-ip ip_address] [-advertise host_name -address address] [-delete host_name -address address] [-createalias name -alias alias] [-deletealias alias]

Use the srvctl update gns command instead.

srvctl * oc4j

The oc4j noun has been deprecated and replaced with qosmserver. SRVCTL still accepts the oc4j noun until it is desupported.

srvctl add service

The PRECONNECToption with the -tafpolicy parameter is deprecated.

srvctl modify service

The -failovermethod {NONE | BASIC} is deprecated.

The PRECONNECToption with the -tafpolicy parameter is deprecated.

SRVCTL Command Reference

Use this comprehensive list of SRVCTL commands to manage Oracle Real Application Clusters (Oracle RAC) environments.

About Using SRVCTL Commands

To be able to use SRVCTL commands to obtain the outcome you require, review these guidelines.

SRVCTL commands, object names, and parameters are case-sensitive. Database, instance, listener, and service names are case insensitive and case preserving. You cannot create listener names that differ only in case, such as LISTENER and listener. SRVCTL uses the following command syntax:

srvctl command object [parameters]

In SRVCTL syntax:

  • command is a verb, such as start, stop, or remove

  • object (also known as a noun) is the target or object on which SRVCTL performs the command, such as database or instance. You can also use object abbreviations.

  • parameters extend the use of a preceding command combination to include additional parameters for the command. For example, the -instances parameter indicates that a comma-delimited list of preferred instance names follows; the -instance parameter only permits one value and not a list of names. Do not use spaces between the items in a comma-delimited list.

Note:

If specifying a comma-delimited list in Windows, then you must enclose the list within double quotation marks ("").

The following table lists the keywords that you can use for the object portion of SRVCTL commands. You can use either the full name or the abbreviation for each object keyword. The Purpose column describes the object and the actions that can be performed on that object.

Table A-4 Object Keywords and Abbreviations

Object Keyword Purpose

Database

database

To add, modify, manage environment variables for, list the configuration of, enable, disable, start, stop, and obtain the status of databases, remove configuration information for or get behavior predictions for a database, and also to convert, upgrade, downgrade, and relocate databases

Diskgroup

diskgroup

To enable, disable, start, stop, obtain the status of, remove, or get behavior predictions for an Oracle ASM disk group

Home

home To start, stop, or obtain the status of resources running from a particular Oracle home directory

Instance

instance

inst

To add, modify, enable, disable, start, stop, obtain the status of, update, and remove database instances

Listener

listener

lsnr

To add, modify, manage environment variables for, list the configuration of, enable, disable, start, stop, obtain the status of, remove, and get behavior predictions for listeners

Network

network

To add, modify, list the configuration of, remove and get behavior predictions for a non-default network resource.

Note: The node applications object, and the config and modify commands also manage the default network

Node applications

nodeapps

To add, modify, manage environment variables for, list the configuration of, enable, disable, start, stop, obtain the status of, and remove node applications

Oracle Notification Service

ons

To add, configure, enable, start, obtain the status of, stop, disable, and remove Oracle Notification Service instances only for Oracle Restart

Pluggable Database (PDB)

pdb

To add, modify, remove, list the configuration of, enable, disable, start, stop, and obtain the status of PDBs

Single client access name (SCAN)

scan

To add, list the configuration of, modify, enable, disable, start, stop, relocate, remove, obtain the status of, and get behavior predictions for SCAN VIPs

SCAN listener

scan_listener

To add, list the configuration of, modify, enable, disable, start, stop, relocate, obtain the status of, remove, and get behavior predictions for SCAN listeners

Server server To obtain the status of and relocate a server to a different server pool

Service

service

To add, modify, list the configuration of, enable, disable, start, stop, obtain the status of, relocate, remove, and get behavior predictions for services

Server Pool

srvpool

To add, modify, list the configuration of, obtain the status of, and remove server pools

Virtual IP

vip

To add, manage environment variables for, list the configuration of, enable, disable, start, stop, obtain the status of, remove, and get behavior predictions for a VIP

Volume

volume

To list the configuration of, enable, disable, start, stop, obtain the status of, and remove an Oracle ACFS volume

Note:

SRVCTL commands specific to Oracle Grid Infrastructure administration operations are documented in CWADD SRVCTL Command Reference

database Commands

Use commands with the database keyword to manage cluster database.

You can add, modify, manage environment variables for, list the configuration of, enable, disable, start, stop, and obtain the status of databases, and also to upgrade, downgrade, and remove database configuration information about databases.

srvctl add database

Adds a database configuration to Oracle Clusterware.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

Syntax

srvctl add database -db db_unique_name -oraclehome oracle_home 
     [-dbtype  {RACONENODE | RAC | SINGLE} [-server "server_list"]
     [-instance instance_name] [-timeout timeout]] [-domain domain_name]
     [-spfile spfile] [-pwfile password_file_path]
     [-role {PRIMARY | PHYSICAL_STANDBY | LOGICAL_STANDBY | SNAPSHOT_STANDBY | FAR_SYNC}]
     [-startoption start_options] [-stopoption stop_options] 
     [-startconcurrency start_concurrency] [-stopconcurrency stop_concurrency]
     [-dbname db_name] [-policy {AUTOMATIC | MANUAL | NORESTART | USERONLY | RANK}] 
     [-node node_name] [-diskgroup "disk_group_list"] [-acfspath "acfs_path_list"] [-eval] 
     [-css_critical {yes | no}] [-memorytarget memory_target] [-maxmemory max_memory] 
     [-defaultnetnum network_number] [-verbose]

Parameters

Table A-5 srvctl add database Command Parameters

Parameter Description
-db db_unique_name

The unique name of the database.

-oraclehome oracle_home

The path for the Oracle database home directory.

-dbtype {RACONENODE | RAC | SINGLE}

The type of database you are adding: Oracle RAC One Node, Oracle RAC, or single instance. The default is RAC. If you specify the -node node_name parameter, then the -dbtype parameter defaults to SINGLE.

-server server_list

List of candidate servers for Oracle RAC One Node databases.

Note: If your Oracle RAC One Node database is policy managed, then you cannot use this parameter.

-instance instance_name

The instance name prefix for Oracle RAC One Node databases. The default value for this parameter is the first 12 characters of the global unique name of the database.

Note: If your Oracle RAC One Node database is policy managed, then you cannot use this parameter.

-timeout timeout

The online database relocation timeout, in minutes, for Oracle RAC One Node databases. The default value is 30.

-domain db_domain

The domain for the database.

Note: You must use this parameter if you set the DB_DOMAIN initialization parameter for the database.

-spfile spfile

The path name of the database server parameter file.

-pwfile password_file_path

The full path to the location of the password file.

-role {PRIMARY | PHYSICAL_STANDBY | LOGICAL_STANDBY | SNAPSHOT_STANDBY | FAR_SYNC}

The role of the database in an Oracle Data Guard configuration. The default is PRIMARY.

-startoption start_options

Startup options for the database, such as OPEN, MOUNT, and NOMOUNT. The default value is OPEN.

Notes:
  • For multi-word startup options, such as read only and read write, separate the words with a space and enclose in double quotation marks (""). For example, "read only".
  • When performing a switchover in an Oracle Data Guard configuration, the -startoption for a standby database that becomes a primary database is always set to OPEN after the switchover.
-stopoption stop_options

Stop options for the database, such as NORMAL, TRANSACTIONAL, IMMEDIATE, and ABORT.

-startconcurrency start_concurrency

Number of instances to be started simultaneously, or 0 to disable this option.

-stopconcurrency stop_concurrency

Number of instances to be stopped simultaneously, or 0 to disable this option.

-dbname db_name

The name of the database, if it is different from the unique name given by the -db parameter.

-policy {AUTOMATIC | MANUAL | NORESTART | USERONLY | RANK}

The management policy for the database.

  • AUTOMATIC (default): The database is automatically restored to its previous running condition (started or stopped) upon restart of the database host computer.
  • MANUAL: The database is never automatically restarted upon restart of the database host computer. A MANUAL setting does not prevent Oracle Clusterware from monitoring the database while it is running and restarting it if a failure occurs.
  • NORESTART: Similar to the MANUAL setting, the database is not automatically restarted upon restart of the database host computer. A NORESTART setting, however, does not restart the database, even if a failure occurs, unless it must be started for dependencies, such as services or PDBs.
  • USERONLY: The database can only be restarted by user command, not as a result of any other reason (auto-start, start by dependency, node failure, and so on.)
  • RANK: The database won't be restarted when the Oracle Clusterware stack is restarted unless it is restarted by start dependencies of its PDBs that are started according to RANK. For example, 2 CDBs have policy set to RANK and their PDBs have policy set to RESTART. If a PDB of CDB1 has a rank of 3 and a PDB in CDB2 has a rank of 2, and if there are only enough resources to start one CDB, then CDB1 will be started by dependency when its PDB is started. CDB2 is not started because its PDB has a lower rank number.
-node node_name

The node name on which you want to register a noncluster, or single instance, Oracle database.

Note: This parameter can be used only with Oracle Clusterware.

-diskgroup "disk_group_list"

A comma-delimited list of Oracle Automatic Storage Management (Oracle ASM) disk groups if database uses Oracle ASM storage.

-acfspath "acfs_path_list"

A single Oracle ASM Cluster File System (Oracle ACFS) path or a comma-delimited list of Oracle ACFS paths enclosed in double quotation marks ("") where the database's dependency is set.

Use this parameter to create dependencies on Oracle ACFS file systems other than ORACLE_HOME, such as for when the database uses ORACLE_BASE on a file system that is different from the ORACLE_HOME file system.

-eval

Use this parameter to hypothetically evaluate the impact of the command on the system.

Note: You can only use this parameter with a policy-managed database. Starting with Oracle Database 21c, policy-managed databases are deprecated.

-css_critical {YES | NO}

You can add weight to a service by setting this parameter to YES. In the event of a node failure within the cluster, Oracle Clusterware will evict the node with the least amount of weight, ensuring that critical services remain available.

Note: You cannot use this parameter with policy-managed databases or nodes.

-memorytarget memory_target

The target memory size, in MB, to be allocated for the database. The default is 0.

-maxmemory max_memory

The maximum memory size, in MB, to be allocated for the resource. If you specify -memorytarget but not -maxmemory, then -maxmemory will default to 0. Both -maxmemory and -memorytarget are validated as long as -memorytarget is less than or equal to -maxmemory.

-defaultnetnum network_number

Specify a network number (an integer) to which services will default in the event you do not specify a network number when you add the service. The number must match the value of the -netnum parameter you specified when you added the network.

Examples

This example shows how to add a database named crm.example.com in a specific Oracle Home directory.

$ srvctl add database -db crm -oraclehome /u01/oracle/product/21c/mydb 
-domain example.com
srvctl config database

Displays the configuration for an Oracle RAC database or lists all configured databases that are registered with Oracle Clusterware.

Syntax

srvctl config database [-db db_unique_name] [-all] [-verbose]

Parameters

Table A-6 srvctl config database Command Parameters

Parameter Description
-db db_unique_name
Unique name for the database. If you do not specify this parameter, then the utility displays the configuration of all database resources.
-all
Print detailed configuration information.
-verbose
Display verbose output.

Example

This command returns output similar to the following:

$ srvctl config database -d main4

Database unique name: main
Database name:
Oracle home: /ade/mjkeenan_main4/oracle
Oracle user: mjkeenan
Spfile:
Password file:
Domain:
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: AUTOMATIC
Server pools:
Disk Groups:
Mount point paths:
Services: test
Type: RAC
Start concurrency:
Stop concurrency:
OSDBA group: dba
OSOPER group: oper
Database instances: main41,main42
Configured nodes: mjkeenan_main4_0,mjkeenan_main4_1
CSS critical: no
CPU count: 0
Memory target : 0
Maximum memory: 0
CPU cap: 0
Database is administrator managed
srvctl convert database

Converts a database either to or from an Oracle RAC One Node database.

Syntax

Use this command with one of the following syntax models:

srvctl convert database -db db_unique_name -dbtype RACONENODE
   [-instance instance_name] [-timeout timeout]

srvctl convert database -db db_unique_name -dbtype RAC [-node node_name]

Parameters

Table A-7 srvctl convert database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name for the database.

Note: If you specify a noncluster database, then command returns an error instructing you to first convert the noncluster database to Oracle RAC or Oracle RAC One Node.

-dbtype RACONENODE | RAC

Specify the type of database to which you are converting, either Oracle RAC One Node or Oracle RAC.

Note: If there is an ongoing or failed online database relocation, then the command returns an error instructing you to first complete or abort the online database relocation and then rerun the command.

-instance instance_name

Optionally, you can specify an instance name prefix for Oracle RAC One Node databases. The default value for this parameter is the first 12 characters of the global unique name of the database.

Notes:

  • You can use this parameter only when converting from an Oracle RAC database to an Oracle RAC One Node database.

  • In order for the converted instance to come online, you must restart the database using the srvctl stop/start database commands.

-timeout timeout

Optionally, you can specify online database relocation timeout, in minutes, for Oracle RAC One Node databases. The default is 30.

-node node_name

Optionally, you can specify the name of the node for an administrator-managed Oracle RAC database. The default is the first candidate.

Note: If you do not specify a node name or you specify a node name where the database is not running, then the command returns an error instructing you specify the correct node.

Example

An example of this command is:
$ srvctl convert database -db myDB -dbtype RACONENODE -instance myDB3
srvctl disable database
Disables a running database.

If the database is a cluster database, then its instances are also disabled.

Syntax

srvctl disable database -db db_unique_name [-node node_name]

Parameters

Table A-8 srvctl disable database Command Parameters

Parameter Description
-db db_unique_name

Specify the name of the database you want to disable.

-node node_name

Optionally, you can specify a node on which you want to disable the database.

Note: You can only use this parameter only with Oracle Clusterware.

Example

The following example disables the database mydb1:

$ srvctl disable database -db mydb1
srvctl downgrade database
Downgrades the configuration of a database and its services from its current version to a specific lower version.

Syntax

srvctl downgrade database -db db_unique_name -oraclehome Oracle_home
  -targetversion to_version

Parameters

Table A-9 srvctl downgrade database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database you want to downgrade.

-oraclehome Oracle_home

Specify the path to the Oracle home.

-targetversion to_version

Specify the database version to which you want to downgrade.

srvctl enable database
Enables a cluster database and its instances.

Syntax

srvctl enable database -db db_unique_name [-node node_name]

Parameters

Table A-10 srvctl enable database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database you want to enable.

-node node_name

Optionally, you can specify the name of the node on which the database resource resides that you want to enable.

Note: You can only use this parameter with Oracle Clusterware.

Example

The following example enables a database named mydb1:

$ srvctl enable database -db mydb1
srvctl getenv database
Displays the values for environment variables associated with a database.

Syntax

srvctl getenv database -db db_unique_name [-envs "name_list"]

Parameters

Table A-11 srvctl getenv database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database for which you want to display the environment variable values.

-envs "name_list"

Optionally, you can specify a comma-delimited list of the names of specific environment variables enclosed in double quotation marks ("") for which you want to display the values.

If you do not use this parameter, then SRVCTL displays the values of all environment variables associated with the database.

Example

The following example displays the environment configuration for a database named crm:

$ srvctl getenv database -db crm
srvctl modify database

Modifies the configuration for a database.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

Syntax

srvctl modify database -db db_unique_name [-dbname db_name] 
     [-instance instance_name] [-oraclehome oracle_home_path] [-user user_name] 
     [-server "server_list"] [-timeout timeout] [-domain db_domain] 
     [-spfile spfile] [-pwfile password_file_path]
     [-role {PRIMARY|PHYSICAL_STANDBY|LOGICAL_STANDBY|SNAPSHOT_STANDBY}]
     [-startoption start_options] [-stopoption stop_options] 
     [-startconcurrency start_concurrency] [-stopconcurrency stop_concurrency]
     [-policy {AUTOMATIC | MANUAL | NORESTART | USERONLY | RANK}] 
     [{-diskgroup "diskgroup_list" | -nodiskgroup}] [-acfspath "acfs_path_list"] 
     [-css_critical {YES | NO}] [-memorytarget memory_target] [-maxmemory max_memory] 
     [-defaultnetnum network_number] [-disabledreason {DECOMMISSIONED}] [-force] [-eval] 
     [-verbose]

Parameters

Table A-12 srvctl modify database Command Parameters

Parameter Description
-db db_unique_name

Unique name for the database.

-dbname db_name

The name of the database, if it is different from the unique name given by the -db parameter.

-instance instance_name

Instance name prefix; this parameter is required for administrator-managed Oracle RAC One Node databases.

-oraclehome oracle_home

The path for the Oracle database home directory.

-user user_name

The name of the user that owns the Oracle home directory.

Note: If you specify the -userparameter, then you must run this command in privileged mode.

-server server_list

List candidate servers for Oracle RAC One Node databases.

Note: You can use this parameter only with administrator-managed Oracle RAC One Node databases. If your Oracle RAC One Node database is policy managed, you cannot use this parameter.

-timeout timeout

Online database relocation timeout, in minutes, for Oracle RAC One Node databases. The default is 30.

-domain db_domain

The domain for the database.

Note: You must use this parameter if you set the DB_DOMAIN initialization parameter for the database.

-spfile spfile

The path name of the database server parameter file.

-pwfile password_file_path

Enter the full path to the location of the password file.

-role {PRIMARY | PHYSICAL_STANDBY | LOGICAL_STANDBY | SNAPSHOT_STANDBY}

The role of the database in an Oracle Data Guard configuration. The default is PRIMARY.

-startoption start_options

Startup options for the database, such as OPEN, MOUNT, and NOMOUNT. The default value is OPEN.

Notes:
  • For multi-word startup options, such as read only and read write, separate the words with a space and enclose in double quotation marks (""). For example, "read only".

  • When performing a switch-over in an Oracle Data Guard configuration, the -startoption for a standby database that becomes a primary database is always set to OPEN after the switchover.

-stopoption stop_options

Stop options for the database, such as NORMAL, TRANSACTIONAL, IMMEDIATE, and ABORT.

-startconcurrency start_concurrency

Number of instances to be started simultaneously, or 0 to disable this option.

-stopconcurrency stop_concurrency

Number of instances to be stopped simultaneously, or 0 to disable this option.

-policy {AUTOMATIC | MANUAL | NORESTART | USERONLY | RANK}

The management policy for the database.

  • AUTOMATIC (default): The database is automatically restored to its previous running condition (started or stopped) upon restart of the database host computer.
  • MANUAL: The database is never automatically restarted upon restart of the database host computer. A MANUAL setting does not prevent Oracle Clusterware from monitoring the database while it is running and restarting it if a failure occurs.
  • NORESTART: Similar to the MANUAL setting, the database is not automatically restarted upon restart of the database host computer. A NORESTART setting, however, does not restart the database, even if a failure occurs, unless it must be started for dependencies, such as services or PDBs.
  • USERONLY: The database can only be restarted by user command, not as a result of any other reason (auto-start, start by dependency, node failure, and so on.)
  • RANK: The database won't be restarted when the Oracle Clusterware stack is restarted unless it is restarted by start dependencies of its PDBs that are started according to RANK. For example, 2 CDBs have policy set to RANK and their PDBs have policy set to RESTART. If a PDB of CDB1 has a rank of 3 and a PDB in CDB2 has a rank of 2, and if there are only enough resources to start one CDB, then CDB1 will be started by dependency when its PDB is started. CDB2 is not started because its PDB has a lower rank number.
-diskgroup "disk_group_list"

Comma-delimited list of Oracle ASM disk groups if database uses Oracle ASM storage.

-acfspath "acfs_path_list"

A single Oracle ACFS path or a comma-delimited list of Oracle ACFS paths enclosed in double quotation marks ("") where the database's dependency is set.

Use this parameter to create dependencies on Oracle ACFS file systems other than ORACLE_HOME, such as for when the database uses ORACLE_BASE on a file system that is different from the ORACLE_HOME file system.

-css_critical {YES | NO}

You can add weight to a service by setting this parameter to YES. In the event of a node failure within the cluster, Oracle Clusterware will evict the node with the least amount of weight, ensuring that critical services remain available.

Note: You can use this parameter only on an administrator-managed node. Should the node become policy managed, at some point, this parameter will no longer apply.

-memorytarget memory_target

Specify the target memory, in MB, to be allocated for the database. The default is 0.

-maxmemory max_memory

Specify the maximum memory, in MB, to be allocated for the resource. If you specify -memorytarget but not -maxmemory, then -maxmemory will be the default value of 0. Both -maxmemory and -memorytarget are validated as long as -memorytarget is less than or equal to -maxmemory.

-defaultnetnum network_number

Specify a network number to which services will default in the event you do not specify a network number when you add a service.

-disabledreason {DECOMMISSIONED}

Marks the database as being decommissioned, which means it cannot be started again and is not being used. This is intended for databases that will be deleted at a future date.

-eval

Use this parameter to hypothetically evaluate the impact of the command on the system.

Note: You can only use this parameter with a policy-managed database.

Usage Notes

  • When using the srvctl modify database command, for a running database, if the server list is supplied, then the node where the database is running must be on that list.

  • The instance name prefix cannot be modified after running the srvctl add database command.

  • You cannot change the management policy from AUTOMATIC (using the -policy parameter) for Oracle RAC One Node databases. Any attempt to do so results in an error message.

Examples

The following example changes the role of a database to a logical standby:

$ srvctl modify database -db crm -role logical_standby

The following example directs the racTest database to use the SYSFILES, LOGS, and OLTP Oracle ASM disk groups:

$ srvctl modify database -db racTest -diskgroup "SYSFILES,LOGS,OLTP"
srvctl predict database
Predicts the consequences of the failure of a specific database.

Syntax

srvctl predict database -db db_unique_name [-verbose]

Usage Notes

  • Specify the unique name of the database you want to check.

  • Optionally, you can use the –verbose parameter to display detailed output.

srvctl relocate database
Initiates the relocation of an Oracle RAC One Node database from one node to another node.

This command also cleans up after a failed relocation, and you can only use it for relocating Oracle RAC One Node databases.

Syntax

Use this command with one of the following syntax models:

To initiate the online relocation of an Oracle RAC One Node database:

srvctl relocate database -db db_unique_name [-node target_node] [-timeout timeout]
   [-stopoption NORMAL] [-drain_timeout drain_timeout] [-verbose]

To abort the failed online relocation of an Oracle RAC One Node database:

srvctl relocate database -db db_unique_name -abort [-revert] 
   [-drain_timeout drain_timeout] [-verbose]

Parameters

Table A-13 srvctl relocate database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database you want to relocate.

-node target_node

Optionally, you can specify a target node to which to relocate the Oracle RAC One Node database.

Note: You must use this parameter if you are relocating an administrator-managed Oracle RAC One Node database.

-timeout timeout

Optionally, you can specify an online database relocation timeout, in minutes, for Oracle RAC One Node databases. The default is 30.

-stopoption NORMAL

Use this parameter to override the default shutdown option for a running instance, such as the default of SHUTDOWN TRANSACTIONAL LOCAL for a primary database or SHUTDOWN IMMEDIATE for a standby database. The only value accepted for -stopoption is NORMAL.

–abort

Use this parameter to abort a failed online database relocation.

–revert

Use this parameter to remove the target node of a failed online relocation request from the candidate server list of an administrator-managed Oracle RAC One Node database.

-drain_timeout timeout

Specify the time, in seconds, allowed for resource draining to be completed. Accepted values are an empty string (""), 0, or any positive integer. The default value is an empty string, which means that this parameter is not set. If it is set to 0, then draining occurs, immediately.

The draining period is intended for planned maintenance operations. During the draining period, all current client requests are processed, but new requests are not accepted. When set on the service this value is used when the command line value is not set.

–verbose

Use this parameter to display verbose output.

Usage Notes

  • If the Oracle RAC One Node database you want to relocate is not running, then the command returns an error.

  • If another online database relocation is active for this Oracle RAC One Node database, then the command returns an error.

  • If the -drain_timeout value is higher than the -timeout value, then SRVCTL relocates the services but does not explicitly start or stop the services on the database instances.
  • If an online database relocation for this Oracle RAC One Node database has failed and the target nodes are not the same for either relocation, then the command returns an error instructing you to abort the failed online database relocation and then initiate a new one.

  • If an online database relocation for this Oracle RAC One Node database has failed and the target nodes are the same (or you do not specify the target), then the command attempts to relocate the database.

Example

The following example relocates an administrator-managed Oracle RAC One Node database named rac1 to a server called node7.

$ srvctl relocate database -db rac1 -node node7
srvctl remove database

Removes database configurations.

After running this command, ensure that the password file is in the default location if you want to connect to the database as the SYS user with the SYS user's password.

Syntax

srvctl remove database -db db_unique_name [-force] [-noprompt] [-verbose]

Parameters

Table A-14 srvctl remove database Command Parameters

Parameter Description
-database db_unique_name

Unique name for the database.

-force

Forcibly remove the database and ignore any dependencies.

-noprompt

Suppress prompts.

-verbose

Display verbose output.

Example

To remove a database named crm:

$ srvctl remove database -db crm
srvctl setenv database
Administers cluster database environment configurations.

Syntax

Use this command with one of the following syntax models:

srvctl setenv database -db db_unique_name -envs "name=val[,...]"
srvctl setenv database -db db_unique_name -env "name=val"

Parameters

Table A-15 srvctl setenv database Command Parameters

Parameter Description
-db db_unique_name

Specify a unique name for the database for which you want to set environment variables.

-envs "name=val[,...]"

Specify a comma-delimited list of name-value pairs of environment variables enclosed in double quotation marks ("") that you want to set.

-env "name=val"

Specify a single environment variable that you want to set to a value that contains commas or other special characters enclosed in double quotation marks ("").

Usage Notes

Add additional information about the command here.

Example

The following example sets the language environment variable for a cluster database:

$ srvctl setenv database -db crm -env LANG=en
srvctl start database
Starts a database and its enabled instances, and all listeners on nodes with database instances.

You can disable listeners that you do not want to start.

Syntax

srvctl start database -db db_unique_name [-eval] [-startoption start_options]
  [-stopconcurrency number_of_instances] [-node node_name]

Parameters

Table A-16 srvctl start database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database you want to start.

–eval

Optionally, use this parameter to hypothetically evaluate the impact of the command on the system.

-startoption start_options

Optionally, you can set options for the startup command (for example: OPEN, MOUNT, or NOMOUNT).

Notes:

  • This command parameter supports all database startup options.

  • For multi-word startup options, such as read only and read write, separate the words with a space and enclose in double quotation marks (""). For example, "read only".

    See Also: SQL*Plus User's Guide and Reference for more information about startup options

-stopconcurrency number_of_instances

Optionally, you can specify a number of database instances to start simultaneously, or specify 0 for an empty start concurrency value.

-node node_name

Optionally, you can specify the name of a node on which you want to start the database.

Notes:

  • This command only applies to Oracle RAC One Node and Standard Edition High Availability databases.

  • The node you specify must be in the candidate list for an administrator-managed Oracle RAC One Node or Standard Edition High Availability database. The node must be in the server pool for a policy-managed Oracle RAC One Node database.

  • If the database is already running on a node than the one you specify, then the command returns an error.

  • If you do not specify a node, then Oracle Clusterware chooses which node on which to start the Oracle RAC One Node or Standard Edition High Availability database according to its policies, such as dispersion, number of resources, and order of candidate nodes.

  • If there is an active online database relocation for the Oracle RAC One Node database you are attempting to start, then both instances will already be running and the command returns an error message. Only during an online database relocation are two instances of an Oracle RAC One Node database in existence.

    If the online database relocation failed for the Oracle RAC One Node database and you do not specify a node, then the command attempts to start both database instances.

    If the online database relocation failed for the Oracle RAC One Node database and you specify a node, then the command attempts to abort the failed relocation and start the instance on that node.

Examples

The following example starts the crm database and sets the startup option to read only:

$ srvctl start database -db crm -startoption "read only"
srvctl status database

This command displays the current state of the of the database.

Syntax

srvctl status database {-db db_unique_name {[-serverpool serverpool_name]
   | [-sid] [-home]} | -serverpool serverpool_name | -thisversion | -thishome} 
   [-force] [-detail] [-verbose]

Parameters

Table A-17 srvctl status database Parameters

Parameter Description
-db db_unique_name

Specify a unique name for the database.

-serverpool serverpool_name

Optionally, you can specify a server pool that SRVCTL will display information on nodes contained within.

–sid

Use this parameter to display the SID of the Oracle instance running on this node.

–home

Use this parameter to display the Oracle home of the specified database.

-thisversion

Use this parameter to display the status of databases that are of the same Oracle product version as SRVCTL.

-thishome

Use this parameter to display the status of databases that are configured in this Oracle home.

-force

Include disabled applications

–detail

Use this parameter to display detailed database status information.

-verbose

Displays STATE_DETAILS and INTERNAL_STATE attributes, which include STABLE, STARTING, STOPPING, and CLEANING.

If the INTERNAL_STATE is STABLE, then SRVCTL displays no additional information. If the INTERNAL_STATE is STARTING, then SRVCTL displays:

Instance instance_name is being started

If the INTERNAL_STATE is CLEANING, then SRVCTL displays:

Instance instance_name is being cleaned up

If the INTERNAL_STATE is STOPPING, then SRVCTL displays:

Instance instance_name is being stopped

Usage Notes

The output of this command includes information on the Oracle ASM or Oracle ASM IOServer instance for each running instance of the database.

Examples

This command displays output similar to the following:

$ srvctl status database -db db00 -detail

Instance db00_1 is connected to ASM instance +ASM3
Instance db00_2 is connected to ASM I/O server instance +IOS1
srvctl stop database

Stops a database, its instances, and its services.

Syntax

srvctl stop database -db db_unique_name [-stopoption stop_options] 
  [-stopconcurrency number_of_instances] [-drain_timeout timeout] [-eval]
  [-force] [-verbose]

Parameters

Table A-18 srvctl stop database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name for the database that you want to stop.

-stopoption stop_options

Optionally, you can specify options for the shutdown command, such as NORMAL, TRANSACTIONAL LOCAL, IMMEDIATE, or ABORT.

-stopconcurrency number_of_instances

Optionally, you can specify a number of database instances to stop simultaneously, or specify 0 for an empty stop concurrency value.

-drain_timeout timeout

Optionally, you can specify the time, in seconds, allowed to complete the resource draining action. By default, this parameter is not set. You can specify 0 or any positive integer. An empty string unsets the parameter. If you specify zero, then the agent will perform the actions related to service draining, immediately.

Drain timeout is the maximum time the service waits before exiting (in case of srvctl stop service or srvctl stop instance) or proceeding to stop database (srvctl stop database), until the draining of sessions is completed. If session draining completes in 10 seconds and the drain timeout value (on CLI or resource attribute) is 100 seconds, then SRVCTL moves on after 10 seconds. It does not wait for the remaining 90 seconds.

-eval

Optionally, you can use this parameter to hypothetically evaluate the impact of the command on the system.

-force

Optionally, you can use this parameter to stop the database, its instances, its services, and any resources that depend on those services.

—verbose

Optionally, you can use this parameter to display detailed output.

Example

The following command example stops a database and includes detailed output:

$ srvctl stop database -db db1 -drain_timeout 50 -verbose
Draining in progress on services svc1,svc2.
Drain complete on services svc1.
Draining in progress on services svc2.
Draining in progress on services svc2.
Drain complete on services svc2.
srvctl unsetenv database
Unsets the cluster database environment configurations.

Syntax

srvctl unsetenv database -db db_unique_name -envs "name_list"

Parameters

Table A-19 srvctl unsetenv database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database for which you want to unset environment variables.

-envs "name_list"

Specify a comma-delimited list of environment variable names enclosed in double quotation marks ("").

Example

The following example unsets two cluster database environment variables:

$ srvctl unsetenv database -db crm -envs "CLASSPATH,LANG"
srvctl update database
Updates the specified database to use the new listener endpoints.

Syntax

srvctl update database -db db_unique_name

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Specify the unique name of the database you want to update.

srvctl upgrade database
Upgrades the configuration of a database and all of its services to the version of the database home from where this command is run.

Syntax

srvctl upgrade database -db db_unique_name -oraclehome Oracle_home

Parameters

Table A-20 srvctl upgrade database Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database you want to upgrade.

-oraclehome Oracle_home

Specify the path to the upgraded ORACLE_HOME.

diskgroup Commands

Use commands with the diskgroup keyword to manage Oracle ASM disk groups.

You can add, modify, list the configuration of, enable, disable, start, stop, obtain the status of, and remove Oracle ASM disk groups.

srvctl disable diskgroup
Disables a specific disk group on a number of specified nodes.

Syntax

srvctl disable diskgroup -diskgroup diskgroup_name [-node "node_list"]

Parameters

Table A-21 srvctl disable diskgroup Command Parameters

Parameter Description
-diskgroup diskgroup_name

Specify the name of the Oracle ASM disk group you want to disable.

-node "node_list"

Optionally, you can specify a comma-delimited list of node names enclosed in double quotation marks ("") on which to disable the disk group.

Note: You can only use this parameter with Oracle Clusterware.

Example

The following example disables the Oracle ASM disk group, dgroup1, on two nodes in a cluster, mynode1 and mynode2:

$ srvctl disable diskgroup -diskgroup dgroup1 -node "mynode1,mynode2"
srvctl enable diskgroup
Enables a specific disk group on a number of specified nodes.

Syntax

srvctl enable diskgroup -diskgroup diskgroup_name [-node "node_list"]

Parameters

Table A-22 srvctl enable diskgroup Command Parameters

Parameter Description
-diskgroup diskgroup_name

Specify the name of the Oracle ASM disk group you want to enable.

-node "node_list"

Optionally, you can specify a comma-delimited list of node names enclosed in double quotation marks ("") on which to enable the disk group.

Note: You can only use this parameter with Oracle Clusterware.

Example

The following example enables the diskgroup1 Oracle ASM disk group on nodes mynode1 and mynode2:

$ srvctl enable diskgroup -diskgroup diskgroup1 -node "mynode1,mynode2"
srvctl predict diskgroup
Predicts the consequences of an Oracle ASM disk group failure.

Syntax

srvctl predict diskgroup -diskgroup diskgroup_name [-verbose]

Usage Notes

Specify the name of the Oracle ASM disk group for which you want to evaluate a failure. Optionally, you can use the –verbose parameter top print detailed output.

srvctl remove diskgroup
Removes a specific Oracle ASM disk group resource from Oracle Clusterware or Oracle Restart.

Syntax

srvctl remove diskgroup -diskgroup diskgroup_name [-force]

Usage Notes

Specify the name of the Oracle ASM disk group you want to remove. Optionally, you can use the –force parameter to ignore any dependencies and forcibly remove the disk group.

Example

The following example forcibly removes the DG1 Oracle ASM disk group:

$ srvctl remove diskgroup -diskgroup DG1 -force
srvctl start diskgroup
Starts a specific Oracle ASM disk group resource on a number of specified nodes.

Syntax

srvctl start diskgroup -diskgroup diskgroup_name [-node "node_list"]

Parameters

Table A-23 srvctl start diskgroup Command Parameters

Parameter Description
-diskgroup diskgroup_name

Specify the name of the Oracle ASM disk group you want to start.

-node "node_list"

Optionally, you can specify a comma-delimited list of node names enclosed in double quotation marks ("") on which to start the disk group resource.

Note: You can only use this parameter with Oracle Clusterware.

Example

The following example starts the diskgroup1 Oracle ASM disk group on the nodes mynode1 and mynode2:

$ srvctl start diskgroup -diskgroup diskgroup1 -node "mynode1,mynode2"
srvctl status diskgroup
Displays the status of a specific disk group on a number of specified nodes.

Syntax

srvctl status diskgroup -diskgroup diskgroup_name [-node "node_list"]
  [-detail] [-verbose]

Parameters

Table A-24 srvctl status diskgroup Command Parameters

Parameter Description
-diskgroup diskgroup_name

Specify the name of the Oracle ASM disk group for which you want to display the status.

-node "node_list"

Optionally, you can specify a comma-delimited list of node names on which to check status of an Oracle ASM disk group.

Note: You can only use this parameter with Oracle Clusterware.

-detail

Optionally, you can use this parameter to display detailed status information for the Oracle ASM disk group.

-verbose

Optionally, you can use this parameter to display verbose output.

Examples

The following example displays the status of the dgrp1 Oracle ASM disk group:

$ srvctl status diskgroup -diskgroup dgrp1 -node "mynode1,mynode2" -detail
srvctl stop diskgroup
Stops a specific Oracle ASM disk group resource on a number of specified nodes.

Syntax

srvctl stop diskgroup -diskgroup diskgroup_name [-node "node_list"] [-force]

Parameters

Table A-25 srvctl stop diskgroup Command Parameters

Parameter Description
-diskgroup diskgroup_name

Specify the name of the Oracle ASM disk group you want to stop.

-node "node_list"

Optionally, you can specify a comma-delimited list of node names enclosed in double quotation marks ("") on which to stop the Oracle ASM disk group resource.

Note: You can only use this parameter with Oracle Clusterware.

-force

Optionally, you can use this parameter to perform a forceful dismount. While this parameter does not stop the databases that depend on the disk group you are stopping, it still may cause those databases to fail.

Example

The following command stops the diskgroup1 Oracle ASM disk group on the two nodes mynode1 and mynode2:

$ srvctl stop diskgroup -diskgroup diskgroup1 -node "mynode1,mynode2" -force

home Commands

Use commands with the home keyword to start, stop, and obtain the status of all clusterware resources related to a Home directory.

srvctl start home
Starts all the Oracle Restart-managed or Oracle Clusterware-managed resources on the specified Oracle home.

Syntax

srvctl start home -oraclehome Oracle_home -statefile state_file -node node_name

Parameters

Table A-26 srvctl start home Command Parameters

Parameter Description
-oraclehome Oracle_home

Specify the path to the Oracle home for which you want to start the Oracle Restart or Oracle Clusterware-managed resources.

-statefile state_file

Specify the path to the directory where you want SRVCTL to write the state file.

-node node_name

Specify the name of the node on which the Oracle home resides.

Note: You can only use this parameter with Oracle Clusterware.

Example

The following command starts an Oracle home:

$ srvctl start home -oraclehome /u01/app/oracle/product/12.2.0/db_1
  -statefile ~/state.txt -node node1
srvctl status home
Displays the status of all the Oracle Restart-managed or Oracle Clusterware-managed resources for the specified Oracle home.

Syntax

srvctl status home -oraclehome Oracle_home -statefile state_file -node node_name

Parameters

Table A-27 srvctl status home Command Parameters

Parameter Description
-oraclehome Oracle_home

Specify the path to the Oracle home for which you want to start the Oracle Restart or Oracle Clusterware-managed resources.

-statefile state_file

Specify the path to the directory that contains the text file that holds the state information generated by this command.

-node node_name

Specify the name of the node on which the Oracle home resides.

Note: This parameter is required and you can only use it with Oracle Clusterware.

Example

The following example obtains the status of a particular Oracle home:

$ srvctl status home -oraclehome /u01/app/oracle/product/21.0.0/dbhome_1 -statefile
 ~/state.txt -node stvm12

The preceding command returns output similar to the following:

Database cdb1 is running on node stvm12
srvctl stop home
Stops all the Oracle Restart-managed or Oracle Clusterware-managed resources that run from the specified Oracle home.

Syntax

srvctl stop home -oraclehome Oracle_home -statefile state_file -node node_name
  [-stopoption stop_options] [-force]

Parameters

Table A-28 srvctl stop home Command Parameters

Parameter Description
-oraclehome Oracle_home

Specify the directory path to the Oracle home for which you want to start the Oracle Restart or Oracle Clusterware-managed resources.

Note: The path to the Oracle home you specify must be the same version as the Oracle home from which you invoke SRVCTL.

-statefile state_file

Specify the path to the directory where you want SRVCTL to write the state file.

-node node_name

Specify the name of the node on which the Oracle home resides.

Note: You can only use this parameter with Oracle Clusterware.

-stopoption stop_options

Optionally, you can specify shutdown options for the database, such as NORMAL, TRANSACTIONAL, IMMEDIATE, or ABORT

See Also: SQL*Plus User's Guide and Reference for more information about shutdown options

-force

Optionally, you can use this parameter to stop the resources even if errors are reported.

Example

The following example stops the Oracle home:

$ srvctl stop home -oraclehome /u01/app/oracle/product/21.0.0/db_1 -statefile
 ~/state.txt

instance Commands

Use commands with the instance keyword to add, modify, enable, disable, start, stop, obtain the status of, and remove database instances.

srvctl add instance

Adds a configuration for an instance to your cluster database configuration.

You can only use this command for administrator-managed databases. If you have a policy-managed database, then use the srvctl modify srvpool command to add an instance to increase either the maximum size, minimum size, or both, of the server pool used by the database.

Syntax

srvctl add instance -db db_unique_name -instance instance_name
     -node node_name [-force]

Parameters

Table A-29 srvctl add instance Command Parameters

Parameter Description
-db db_unique_name

The unique name of the database you are adding the instance to

-instance instance_name

The name of the instance you are adding

-node node_name

The name of the node on which you are creating the instance

-force

Optionally, you can force the add operation, even though some resources will be stopped.

Usage Notes

  • You can only use this command with Oracle Clusterware and Oracle RAC.

  • This command increments the CARDINALITY resource attribute.

  • If you attempt to use this command on an Oracle RAC One Node database, then the command returns an error stating you must convert the database to Oracle RAC.

Examples

Examples of this command are:

$ srvctl add instance -db crm -instance crm01 -node gm01
$ srvctl add instance -db crm -instance crm02 -node gm02
$ srvctl add instance -db crm -instance crm03 -node gm03
srvctl disable instance
Disables a database instance.

If the database instance that you disable with this command is the last enabled database instance, then this operation also disables the database.

Note:

  • This command is only available with Oracle Clusterware and Oracle RAC.

  • If you run this command on an Oracle RAC One Node database, then the command returns an error instructing you to use the database noun, instead.

Syntax

srvctl disable instance -db db_unique_name -instance "instance_name_list"

Parameters

Table A-30 srvctl disable instance Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name for the database for which you want to disable the instance.

-instance "instance_name_list"

Specify an instance name or a comma-delimited list of instance names enclosed in double quotation marks ("") you want to disable.

Example

The following example disables two instances of the crm database, named crm1 and crm2:

$ srvctl disable instance -db crm -instance "crm1,crm3"
srvctl enable instance
Enables an instance of an Oracle RAC database.
If you use this command to enable all instances, then the database is also enabled.

Note:

  • You can only use this command with Oracle Clusterware and Oracle RAC.

  • If you run this command on an Oracle RAC One Node database, then the command returns an error instructing you to use the database noun, instead.

Syntax

srvctl enable instance -db db_unique_name -instance "instance_name_list"

Parameters

Table A-31 srvctl enable instance Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database for which you want to enable instances.

-instance "instance_name_list"

Specify a comma-delimited list of instance names enclosed in double quotation marks ("") that you want to enable.

Example

The following example enables two instances of the crm database:

$ srvctl enable instance -db crm -instance "crm1,crm2"
srvctl modify instance
For an administrator-managed database, this command modifies the configuration for a database instance from its current node to another node. For a policy-managed database, this command defines an instance name to use when the database runs on the specified node.

Syntax

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.
srvctl modify instance -db db_unique_name -instance instance_name
     -node node_name

Parameters

Table A-32 srvctl modify instance Command Parameters

Parameter Description
-database db_unique_name

Specify the unique name for the database.

-instance instance_name

Specify the database instance name.

Notes:

  • If you are modifying a policy-managed database instance, then the instance name must contain an underscore (_), such as pmdb1_1.

  • If you specify an instance name that has never been started before, and is not of the form prefix_number, then you may have to assign an instance number, undo, and redo in the SPFILE.

-node node_name

Name of the node on which to run the instance. You can set the value of this parameter to "" only for a policy-managed database.

Usage Notes

You cannot use this command to rename or relocate a running instance.

Examples

The following example to changes the configuration of an administrator-managed database, amdb, so that the database instance, amdb1, runs on the specified node, mynode:

$ srvctl modify instance -db amdb -instance amdb1 -node mynode

The following example causes the policy-managed database pmdb, when and if it runs on mynode, to use the instance name pmdb1:

$ srvctl modify instance -db pmdb -instance pmdb1_1 -node mynode

The following example removes the directive established by the previous example:

$ srvctl modify instance -db pmdb -instance pmdb1_1 -node ""
srvctl remove instance
Removes the configurations for an instance of an administrator-managed database.

To remove the configurations of a policy-managed database, you must shrink the size of the server pool with the srvctl modify srvpool command.

Syntax

srvctl remove instance -db db_unique_name -instance instance_name
  [-noprompt] [-force]

Parameters

Table A-33 srvctl remove instance Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the administrator-managed database.

-instance instance_name

Specify the name of the Instance you want to remove.

-noprompt

Use this parameter to suppress prompts.

–force

Use this parameter to skip checking that the instance is not running, and remove it even though it is running. This parameter also skips checking that the instance has no running services using it, and causes those services to stop before the instance is removed.

Usage Notes

  • You can use this command only with Oracle Clusterware and Oracle RAC.

  • If you use the -force parameter, then any services running on the instance stop. Oracle recommends that you reconfigure services to not use the instance you want to removed as a preferred or available instance before removing the instance.

  • If you attempt to use this command on an Oracle RAC One Node database, then the command returns an error stating that cannot remove the instance except by removing the database.

Example

The following example removes the crm01 database instance from the crm database.

$ srvctl remove instance -db crm -instance crm01
srvctl start instance

Starts instances and their dependencies in the cluster database.

Use the srvctl start instance command to start database instances, and all listeners on nodes with database instances.

Syntax

Use the srvctl start instance command with one of these syntax models:

To start all Oracle Clusterware managed database instances on one or more nodes:

srvctl start instance -node "node_list" [-startoption start_options]

To start an instance of a database on a specific node:

srvctl start instance -db db_unique_name -node node_name 
   [-instance "instance_name"] [-startoption start_options]

To start an instance of a database on one or more nodes:

srvctl start instance -db db_unique_name -node "node_list" [-startoption start_options]

To start specific instances of a database on available nodes:

srvctl start instance -db db_unique_name -instance "inst_name_list"
    [-startoption start_options]

Parameters

Table A-34 srvctl start instance Parameters

Parameter Description
-db db_unique_name

Unique name for the database

-node node_name or -node "node_list"

The name of a single node or a comma-delimited list of node names

-instance "instance_name" or -instance "inst_name_list"

The name of a single instance or a comma-delimited list of instance names

-startoption start_options

Options for startup command, such as OPEN, MOUNT, or NOMOUNT)

Note: For multi-word startup options, such as read only and read write, separate the words with a space and enclose in double quotation marks (""). For example, "read only".

Usage Notes

  • This command is only available with Oracle Clusterware and Oracle RAC.
  • If you run this command on an Oracle RAC One Node database, then the command returns an error instructing you to use the database noun, instead.

Related Topics

srvctl status instance

Displays the status of instances.

Note:

This command is only available with Oracle Clusterware and Oracle RAC.

srvctl stop instance

The srvctl stop instance command stops instances and stops any services running on specified instances.

Syntax

Use this command with one of the following syntax models.

To stop all instances on one or more nodes:

srvctl stop instance -node "node_list" [-stopoption stop_options]
    [-drain_timeout timeout] [-force] [-failover] [-verbose]

To stop instances for a database that are running on specific nodes:

srvctl stop instance -db db_unique_name -node "node_list" 
    [-stopoption stop_options] [-drain_timeout timeout] [-force] [-failover] [-verbose]

To stop one or more instances by name for a database:

srvctl stop instance -db db_unique_name -instance "instance_name_list" 
    [-stopoption stop_options] [-drain_timeout timeout] [-force] [-failover] [-verbose]

Parameters

Table A-35 srvctl stop instance Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name for the database for which you want to stop an instance.

-node "node_list"

Specify a comma-delimited list of node names enclosed in double quotation marks ("").

If you specify -node without specifying a value for -db, then all instances running on a node are stopped, regardless of which databases they are associated with.

-instance "instance_name_list"

Specify a comma-delimited list of instance names enclosed in double quotation marks ("").

-stopoption stop_options

Specify options for the shutdown command, such as NORMAL, TRANSACTIONAL LOCAL, IMMEDIATE, or ABORT.

-drain_timeout timeout

The time, in seconds, allowed to complete the resource draining action. By default, this parameter is not set. You can specify 0 or any positive integer. An empty string unsets the parameter. If you specify zero, then the agent will perform the actions related to service draining, immediately.

Drain timeout is the maximum time the service waits before exiting (in case of srvctl stop service or srvctl stop instance) or proceeding to stop database (srvctl stop database), until the draining of sessions is completed. If session draining completes in 10 seconds and the drain timeout value (on CLI or resource attribute) is 100 seconds, then SRVCTL moves on after 10 seconds. It does not wait for the remaining 90 seconds.

-force

Use this parameter to forcibly stop the instance and any running services if the srvctl stop instance command fails with an error.

–failover

If you specify -failover, then the services fail over to an available instance when the instance stops.

-verbose

Display verbose output.

Usage Notes

If you run this command on an Oracle RAC One Node database, then the command returns an error instructing you to use the srvctl stop database command instead.

Example

The following command example stops the instance of the db1 database running on the node server1, and includes verbose output:

$ srvctl stop instance -db db1 -node server1 -drain_timeout 50 -verbose
Draining in progress on services svc1
Draining in progress on services svc1
Drain complete on services svc1

Related Topics

srvctl update instance

The srvctl update instance command changes the open mode or the target Oracle ASM instance of the database instances.

Syntax

srvctl update instance -db db_unique_name [-instance "instance_name_list" 
    | -node "node_list"] [-startoption start_options] [-targetinstance instance_name]

Parameters

Parameter Description
-db db_unique_name

The unique name of the database

-instance "instance_name_list" | -node "node_list"

A comma-delimited list of instance names or node names that you want to update. If you specify a list of node names, then SRVCTL udpates the instances running on those specific nodes.

-startoption start_options

The specify startup options for the database, such as OPEN, MOUNT, or "READ ONLY"

-targetinstance instance_name

The target Oracle ASM or Oracle ASM IOServer instance. Use double quotation marks ("") with no space in-between to specify the default target instance.

Examples

An example of this command is:

$ srvctl update instance -db db00 -instance db00_3 -targetinstance +ASM2

listener Commands

Use commands with the listener keyword to add, modify, manage environment variables for, list the configuration of, enable, disable, start, stop, obtain the status of, and remove listeners.

srvctl add listener

Adds a listener to every node in a cluster.

Syntax

Use this command with one of the following syntax models.

To create an Oracle Database listener:

srvctl add listener [-listener listener_name] [-netnum network_number] [-oraclehome Oracle_home]
  [-user user_name] [-endpoints "[TCP:]port_list[:FIREWALL={ON|OFF}][/IPC:key][/NMP:pipe_name]
  [/{TCPS|SDP|EXADIRECT}port_list[:FIREWALL={ON|OFF}]]" [-group group_name]] [-invitednodes "node_list"]
  [-invitedsubnets "subnet_list"] [-skip]

To create an Oracle ASM listener:

srvctl add listener [-listener listener_name] -asmlistener [-subnet subnet]
  [-endpoints "[TCP:]port_list[:FIREWALL={ON|OFF}][/IPC:key][/NMP:pipe_name]
  [/{TCPS|SDP|EXADIRECT}port_list[:FIREWALL={ON|OFF}]]" [-group group_name]] [-invitednodes "node_list"]
  [-invitedsubnets "subnet_list"] [-skip]

To create a SCAN listener, use the srvctl add scan_listener command.

Parameters

Table A-36 srvctl add listener Command Parameters

Parameter Description
-listener listener_name

Specify a listener name. This parameter is optional.

If you do not specify this parameter, then the name of the listener defaults to LISTENER for a database listener or LISTENER_ASM for an Oracle ASM listener.

-netnum network_number

The optional network number from which VIPs are obtained. If not specified, the VIPs are obtained from the same default network from which the nodeapps VIP is obtained.

Note: Use this parameter when you add an Oracle Database listener.

-oraclehome oracle_home

Specify an Oracle home for the cluster database. If you do not include this parameter, then SRVCTL uses the Grid home by default.

Note: Use this parameter when you add an Oracle Database listener.

-user user_name

Use this parameter to set the user that will run the listener to a less privileged user. Oracle recommends using this parameter to increase security.

Notes:

  • You must be logged in as root to run this command and specify the -user parameter.

  • Use this parameter when you add an Oracle Database listener.

  • When you use the -user parameter, ensure the following:

    The listener log directory in the Oracle Base directory and the Grid_home/network/admin/user_name directory must both exist on each node before you can use this parameter. Additionally, user_name must have read, write, and execute permission in the directory.

    The Oracle_Base/diag/tnslsnr/host_name/lower_case_listener_name directory exists and user_name has read, write, and execute permission on it.

  • Before you can use LSNRCTL to manage a listener, you must set TNS_ADMIN to Grid_home/network/admin/user_name.

-endpoints "[TCP:]port_list[:FIREWALL={ON|OFF}][/IPC:key] [/NMP:pipe_name][/{TCPS|SDP|EXADIRECT}port_list[:FIREWALL={ON|OFF}]]"]

Protocol specifications for the listener. Use port_list to specify a comma-delimited list of TCP ports or listener endpoints.

If you do not specify the -endpoints parameter for an Oracle Database listener, then SRVCTL searches for a free port between 1521 and 1540.

You can also specify endpoints for TCPS, SDP, and EXADIRECT ports.

Note: You can modify this attribute using Online Resource Attribute Modification.

-group group_name

Optionally, you can use the -group parameter with -endpoints to specify a group for the secure endpoint. This parameter is used for the EXADIRECT protocol on Exadata and Exalogic systems.

-invitednodes "node_list"

Specify a comma-delimited list of node names allowed to register with the listener.

-invitedsubnets "subnet_list"

Specify a comma-delimited list of subnets allowed to register with the listener.

-skip

Indicates you want to skip the checking of ports.

-asmlistener

Specifies the listener type as an Oracle ASM listener. If you do not specify the -listener parameter, then the name of the Oracle ASM listener defaults to LISTENER_ASM.

Note: You can only use this parameter with Oracle Clusterware.

-subnet subnet

Specifies the subnet to use for an Oracle ASM listener.

Note: You can only use this parameter with Oracle Clusterware.

Usage Notes

You must run this command as root user on Linux and UNIX platforms when you specify the -user parameter.

Example

The following command adds a listener named listener112 that is listening on ports 1341, 1342, and 1345 and runs from the Oracle home directory on every node in the cluster.

$ srvctl add listener -listener listener112 -endpoints "1341,1342,1345" 
-oraclehome /u01/app/oracle/product/21.0.0/db1

When a listener is configured in the Oracle RAC home instead of the Grid home, then the listener.ora file is created under the location returned by the $ORACLE_HOME/bin/orabasehome utility, in the subdirectory network/admin, for example, /u02/racbase/homes/OraDB21Home1/network/admin.

srvctl config listener

Displays configuration information of a specific listener that is registered with Oracle Clusterware.

Syntax

srvctl config listener [-listener listener_name | -asmlistener] [-all]

Parameters

Table A-37 srvctl config listener Command Parameters

Parameter Description
-listener listener_name | -asmlistener

The name of a specific listener name or the type of listener (Oracle ASM).

If you do not specify this parameter, then SRVCTL displays the configuration for the default database listener.

-all

Print detailed configuration information.

Example

This command returns output similar to the following:

Name: LISTENER
Subnet: 10.100.200.195
Type: type
Owner: scott
Home: Grid_home
End points: TCP:1521
srvctl disable listener
Disables a listener resource.

Syntax

srvctl disable listener [-listener listener_name] [-node node_name]

Parameters

Table A-38 srvctl disable listener Command Parameters

Parameter Description
-listener listener_name

Optionally, you can specify the name of a particular listener resource. If you do not specify this parameter, then the name of the listener defaults to LISTENER.

-node node_name

Optionally, you can specify the name of a cluster node on which the listener resource you want to disable is running.

Note: This parameter is only available with Oracle Clusterware.

Example

The following example disables a listener resource named listener_crm on the node node5:

$ srvctl disable listener -listener listener_crm -node node5
srvctl enable listener
Enables a listener resource.

Syntax

srvctl enable listener [-listener listener_name] [-node node_name]

Parameters

Table A-39 srvctl enable listener Command Parameters

Parameter Description
-listener listener_name

Optionally, you can specify the name of a listener resource. If you do not use this parameter, then the name of the listener defaults to LISTENER.

-node node_name

Optionally, you can specify the name of a cluster node on which to enable the listener.

Note: You can only use this parameter with Oracle Clusterware.

Examples

The following example enables the listener named listener_crm on the node named node5:

$ srvctl enable listener -listener listener_crm -node node5
srvctl getenv listener
Displays the environment variables for the specified listener.

Syntax

srvctl getenv listener [-listener listener_name] [-envs "name_list"]

Parameters

Table A-40 srvctl getenv listener Command Parameters

Parameter Description
-listener listener_name

Optionally, you can specify a listener name for which you want to obtain the environment variables.

If you do not use this parameter, then the name of the listener defaults to LISTENER.

-envs "name_list"

Optionally, you can specify a comma-delimited list of the names of environment variables enclosed in double quotation marks ("").

If you do not use this parameter, then SRVCTL displays the values of all environment variables associated with the listener.

Example

The following example lists all environment variables specified for the default listener:

$ srvctl getenv listener
srvctl modify listener
Changes several aspects of the listener

Changes the Oracle home directory from which the listener runs, the name of the operating system user who owns Oracle home directory from which the listener runs, the listener endpoints, or the public subnet on which the listener listens, either for the default listener, or a specific listener, that is registered with Oracle Restart or with Oracle Clusterware.

If you want to change the name of a listener, then use the srvctl remove listener and srvctl add listener commands.

Syntax

srvctl modify listener [-listener listener_name] [-oraclehome oracle_home] 
 [-endpoints "[TCP:]port_list[:FIREWALL={ON|OFF}][/IPC:key][/NMP:pipe_name]
 [/{TCPS|SDP|EXADIRECT}port_list[:FIREWALL={ON|OFF}]]"] [-group <group>] 
 [-user user_name] [-netnum network_number]

Parameters

Table A-41 srvctl modify listener Command Parameters

Parameter Description
-listener listener_name

Optionally, you can enter the name of the listener you want to modify.

If you do not use this parameter, then SRVCTL uses the default name, LISTENER.

-oraclehome oracle_home

If you choose to use this parameter, then SRVCTL moves the listener to run from the Oracle home you specify.

Note: When you use this parameter, run the command as a privileged user to enable SRVCTL to update resource ownership corresponding to the new ORACLE_HOME owner.

-endpoints "[TCP:]port_list[:FIREWALL={ON|OFF}][/IPC:key][/NMP:pipe_name][/{TCPS|SDP|EXADIRECT}port_list[:FIREWALL={ON|OFF}]]"

Optionally, you can use this parameter to modify protocol specifications for the listener. You must enclose the string of protocols in double quotation marks ("").

port_list is comma-delimited list of port numbers.

You can also modify endpoints for TCPS, SDP, and EXADIRECT ports.

Note: You can modify this attribute using Online Resource Attribute Modification.

-group group_name

Optionally, you can use the -group parameter with -endpoints to specify a group for the secure endpoint. This parameter is used for the EXADIRECT protocol on Exadata and Exalogic systems.

-user user_name

Optionally, you can specify the name of the operating system user who will own the specified Oracle listener

Notes:

  • You can only use this parameter with Oracle Clusterware.
  • You must be logged in as root to run this command and specify the -user parameter.

  • When you use the -user parameter, ensure the following:

    The listener log directory in ORACLE_BASE and the Grid_home/network/admin/user_name directory must both exist on each node before you can use this parameter. Additionally, user_name must have read, write, and execute permission in the directory.

    The $ORACLE_BASE/diag/tnslsnr/host_name/lower_case_listener_name directory exists and user_name has read, write, and execute permission on it.

  • Before you can use LSNRCTL to manage a listener, you must set TNS_ADMIN to Grid_home/network/admin/user_name.

-netnum network_number

Optionally, you can use this parameter to change the public subnet on which the listener listens.

Note: Oracle recommends that you always have at least one listener on the default network. Do not use this parameter to change the network of the only listener that listens on the default network.

Example

The following example changes the TCP ports for the default listener:

$ srvctl modify listener -endpoints "TCP:1521,1522"
srvctl predict listener
Predicts the consequences of a listener failure.

Syntax

srvctl predict listener listener_name [-verbose]

Usage Notes

Specify the name of the listener for which you want to predict the consequences of a failure. Optionally, you can use the –verbose parameter for detailed output.

srvctl remove listener
Removes the configuration of a specific listener, or all listeners, from Oracle Clusterware or Oracle Restart.

Syntax

srvctl remove listener [-listener listener_name | -all] [-force]

Usage Notes

  • Optionally, you can specify the name of a listener that you want to remove or use the –all parameter to remove all listeners. If you do not specify a listener name, then the listener name defaults to LISTENER for a database listener or LISTENER_ASM for an Oracle ASM listener.

  • Optionally, you can use the –force parameter to skip checking whether there are other resources that depend on this listener, such as databases, and remove the listener anyway.

Example

The following example removes the configuration for the listener named lsnr01:

$ srvctl remove listener -listener lsnr01
srvctl setenv listener
Administers listener environment configurations.

Syntax

Use this command with one of the following syntax models:

srvctl setenv listener [-listener listener_name] -envs "name=val[,...]"

srvctl setenv listener [-listener listener_name] -env "name=val"

Parameters

Table A-42 srvctl setenv listener Command Parameters

Parameter Description
-listener listener_name

Optionally, you can specify the name of a listener.

If you do not use this parameter, then the listener name defaults to LISTENER.

-envs "name=val[,...]"

Specify a comma-delimited list of name-value pairs of environment variables enclosed in double quotation marks ("").

-env "name=val"

Use this parameter to enable single environment variable to be set to a value that contains commas or other special characters enclosed in double quotation marks ("").

Examples

The following example sets the language environment configuration for the default listener:

$ srvctl setenv listener -env "LANG=en"
srvctl start listener
Starts the default listener on specific node, or starts the specified listener on all nodes that are registered with Oracle Clusterware or on the given node.

Syntax

srvctl start listener [-node node_name] [-listener listener_name]

Parameters

Table A-43 srvctl start listener Command Parameters

Parameter Description
-node node_name

Specify a particular node name to start the listener on that node.

Note: You can only use this parameter with Oracle Clusterware.

-listener listener_name

Specify a particular listener name. Use the srvctl config listener command to obtain the name of a listener.

If you do not assign a value to this parameter, then SRVCTL starts all known listeners in the cluster.

Examples

The following command starts all listeners managed by Oracle Clusterware on the node named server3.

$ srvctl start listener -node server3
srvctl status listener
Displays the status of listener resources.

Syntax

srvctl status listener [-listener listener_name] [-node node_name] [-verbose]

Parameters

Table A-44 srvctl status listener Command Parameters

Parameter Description
-listener listener_name

Optionally, you can specify the name of a listener.

If you do not use this parameter, then the listener name defaults to LISTENER.

-node node_name

Optionally, you can specify the name of a cluster node.

Note: You can only use this parameter with Oracle Clusterware.

–verbose

Optionally, you can use this parameter to display verbose output.

Examples

The following example displays the status of the default listener on the node node2:

$ srvctl status listener -node node2
srvctl stop listener
Stops the default listener or a specific listener on all nodes or the specified node.

You can also use this command to stop a listener on a non-cluster database from the non-cluster database home. However, SRVCTL does not accept the -node parameter when run from a non-cluster database home.

Syntax

srvctl stop listener [-listener listener_name] [-node node_name] [-force]

Parameters

Table A-45 srvctl stop listener Command Parameters

Parameter Description
-listener listener_name

Specify the name of the listener you want to stop.

If you do not assign a value to this parameter, then SRVCTL stops all known listeners in the cluster.

-node node_name

Optionally, you can specify the name of a single node on which a particular listener runs.

Note: You can only use this parameter with Oracle Clusterware.

–force

Forcibly stop the listener.

Examples

The following command stops all listeners on the node mynode1:

$ srvctl stop listener -node mynode1
srvctl unsetenv listener
Unsets the environment configuration for a listener.

Syntax

srvctl unsetenv listener [-listener listener_name] -envs "name_list"

Parameters

Table A-46 srvctl unsetenv listener Command Parameters

Parameter Description
-listener listener_name

Optionally, you can specify the name of a listener for which you want to unset the environment configuration.

If you do not use this parameter, then the name of the listener defaults to LISTENER.

-envs "name_list"

Specify a comma-delimited list of environment variable names enclosed in double quotation marks ("") that you want to unset.

Examples

The following example unsets the environment variable TNS_ADMIN for the default listener:

$ srvctl unsetenv listener -envs "TNS_ADMIN"
srvctl update listener
Updates the listener to listen on the new endpoints.

Syntax

srvctl update listener

Usage Notes

  • This command does not accept any additional parameters, except for -help.

  • You can only use this command with Oracle Clusterware.

network Commands

Use commands with the network keyword to add, modify, list the configuration of, and remove a non-default Network.

srvctl add network

Adds a static or dynamic network.

If your server connects to more than one network, then you can use this command to configure an additional network interface for Oracle RAC, allowing you to create VIPs on multiple public networks.

Syntax

srvctl add network [-netnum net_number] -subnet subnet/netmask[/if1[|if2...]]
   [-nettype {STATIC | DHCP | AUTOCONFIG | MIXED}] [-pingtarget "ping_target_list"] 
   [-skip] [-verbose]

Parameters

Table A-47 srvctl add network Command Parameters

Parameter Description
-netnum net_number

The network number. The default is 1.

-subnet subnet/netmask [/if1[|if2|...]]

Defines a subnet. If you do not specify any interface names, then the network uses any interface on the given subnet.

For IPv6, netmask is a prefix length, such as 64.

-nettype {STATIC|DHCP|AUTOCONFIG|MIXED}

Specify the network type: STATIC, DHCP, AUTOCONFIG, or MIXED.

If you specify STATIC for the network type, then you must provide the virtual IP address using the srvctl add vip command.

If you specify DHCP for the network type, then the VIP agent obtains the IP address from a DHCP server.

If you specify AUTOCONFIG for the network type, then the VIP agent generates a stateless IPv6 address for the network. You can only use AUTOCONFIG for IPv6 networks. If the subnet/netmask specification is not for an IPv6 address, then SRVCTL returns an error.

If you specify MIXED for the network type, then the VIP resource uses both a static IP address and an IP address obtained dynamically, either from a DHCP server for IPv4 or using stateless auto-configuration for IPv6.

-pingtarget "ping_target_list"

A comma-delimited list of IP addresses or host names to ping.

-skip

Use this parameter to skip the checking of subnet.

-verbose

Verbose output.

Usage Notes

  • On Linux and UNIX systems, you must be logged in as the root user and on Windows, you must be logged in as a user with Administrator privileges to run this command.

  • This command is only available with Oracle Clusterware.

  • Oracle only supports DHCP-assigned networks for the default network, not for subsequent networks.

  • You can also use the LISTENER_NETWORKS database initialization parameter to control client redirects to the appropriate network.

Example

An example of this command is:

# srvctl add network -netnum 3 -subnet 192.168.3.0/255.255.255.0
srvctl config network

Displays the network configuration for the cluster.

Syntax

srvctl config network [-netnum network_number]

Usage Notes

  • Specify the network for which you want to display configuration information.

  • This command is only available with Oracle Clusterware.

Example

An example of this command is:

$ srvctl config network -netnum 2
srvctl modify network
Modifies the subnet, network type, or IP address type for a network.

Syntax

srvctl modify network [-netnum network_number] [-subnet subnet/netmask
  [/if1[|if2|...]]] [-nettype network_type | -iptype {ipv4 | ipv6 | both}]
  [-pingtarget "ping_target_list"] [-verbose]

Parameters

Table A-48 srvctl modify network Command Parameters

Parameter Description
-netnum network_number

Optionally, you can specify a network number that you want to modify. The default is 1.

-subnet subnet/netmask [/if1[|if2|...]]

Optionally, you can specify a subnet number for the public network. The netmask and interfaces you specify, if any, change those of the network you are modifying. If you specify an IPv6 subnet, then enter a prefix length, such as 64, in place of netmask. If you do not specify any interface names, then the VIPs use any interface on the given subnet.

If you are changing the network type using the -nettype parameter, then you must specify either an existing IPv4 or IPv6 network using the -subnet parameter. Additionally, the subnet and netmask you specify in the -subnet parameter do not change those of the network you are modifying.

-nettype network_type Optionally, you can modify the network type using this parameter, to static, dhcp, autoconfig, or mixed.
-iptype {ipv4 | ipv6 | both}

Alternative to modifying the network type, you can modify the type of IP address to ipv4, ipv6, or both.

-pingtarget "ping_target_list"

Optionally, you can specify a comma-delimited list of IP addresses or host names to ping enclosed in double quotation marks ("").

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • On Linux and UNIX systems, you must be logged in as root and on Windows, you must be logged in as a user with Administrator privileges to run this command.

  • You can modify the IP address type for a network from IPv4 to IPv6, or from IPv6 to IPv4.

  • If you specify static for the network type, then you must provide the virtual IP address using the srvctl add vip command.

  • If you specify dhcp for the network type, then the VIP agent obtains the IP address from a DHCP server.

  • If you specify autoconfig for the network type, then the VIP agent generates a stateless IPv6 address for the network. You can only use this parameter for IPv6 networks. If the subnet/netmask specification is not for an IPv6 address, then SRVCTL returns an error.

  • If you change a network from static to mixed, then you must first configure GNS, so that the dynamic addresses obtained can have names registered for them.

  • If you specify mixed for the network type, then the VIP resource uses both a static IP address and an IP address obtained dynamically, either DHCP or autoconfig.

  • If you specify mixed_autoconfig for the network type, then the VIP resource retains the static IP configuration and either obtains an IP address from a DHCP server for an IPv4 network specification or generates a stateless auto-configured IP address for an IPv6 network specification.

Examples

The following example changes the subnet number, netmask, and interface list:

# srvctl modify network -subnet 192.168.2.0/255.255.255.0/eth0

The following example changes the second network to DHCP:

# srvctl modify network -netnum 2 -nettype dhcp

The following example adds an IPv6 subnet and netmask to the default network:

# srvctl modify network -subnet 2606:b400:400:18c0::/64

The following example removes the IPv4 configuration from a network:

# srvctl modify network -iptype ipv6
srvctl predict network
Predicts the consequences of network failure.

Syntax

srvctl predict network [-netnum network_number] [-verbose]

Usage Notes

Optionally, you can specify a network for which you want to evaluate a failure. The default value is 1. You can also use the –verbose parameter to print detailed output.

Example

The following example predicts the consequences of a failure on network number 2:

$ srvctl predict network -netnum 2
srvctl remove network
Removes the network configuration.

Syntax

srvctl remove network {-netnum network_number | -all} [-force] [-verbose]

Parameters

Table A-49 srvctl remove network Command Parameters

Parameter Description
-netnum network_number | -all

Specify which network number you want to remove. Alternatively, you can use the –all parameter to indicate that you want to remove all networks.

-force

Optionally, you can use this parameter to remove the specified network regardless of any dependencies.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

  • You can only use the command with Oracle Clusterware.

  • You must have full administrative privileges to run this command. On Linux and UNIX systems, you must be logged in as root and on Windows systems, you must be logged in as a user with Administrator privileges.

Example

The following example removes a network:

# srvctl remove network -netnum 3

nodeapps Commands

Use commands with the nodeapps keyword to add, modify, manage environment variables for, list the configuration of, enable, disable, start, stop, obtain the status of, and remove node applications.

srvctl add nodeapps

Adds a node application configuration to the specified node.

Syntax

Use this command with one the following syntax models, specifying either a specific node and VIP or a specific subnet and netmask:

srvctl add nodeapps 
    {-node node_name -address {vip_name | ip_address}/netmask[/if1[|if2|..]] [-skip]}
    [-emport em_port] [-onslocalport ons_local_port] 
    [-onsremoteport ons_remote_port] [-onshostport hostname_port_list]
    [-remoteservers hostname_port_list [-verbose] 
srvctl add nodeapps -subnet subnet/netmask[/if1[|if2|...]] [-emport em_port]
    [-onslocalport ons_local_port] [-onsremoteport ons_remote_port]
    [-onshostport hostname_port_list] [-remoteservers hostname_port_list] 
    [-verbose]

Parameters

Table A-50 srvctl add nodeapps Command Parameters

Parameter Description
-node node_name

The name of the node on which you want to create the node application. Node name is optional and unnecessary if you run the command on the local node.

-address {vip_name | ip_address}/netmask[/if1[|if2|..]]}

This specification creates a traditional VIP node application on the specified node.

Note: You must use this parameter for upgrade configurations and new, non-DHCP configurations.

-skip

Specify this parameter to skip checking the reachability of the VIP address.

-subnet subnet/netmask [/if1[|if2 |...]]

Creates a DHCP subnet. If you do not specify any interface names, then the VIPs use any interface on the given subnet.

-emport em_port

Local port on which Oracle Enterprise Manager listens. The default port is 2016.

-onslocalport ons_local_port

The Oracle Notification Service daemon listener port on its node.

If you do not specify this value, the Oracle Notification Service daemon listener port defaults to 6100.

Note: The local port and remote port must each be unique.

-onsremoteport ons_remote_port

The port number for remote Oracle Notification Service daemon connections.

If you do not specify a port number, the default value of 6200 is used for the Oracle Notification Service remote port.

Note: The local port and remote port must each be unique.

-onshostport host_port_list

A list of host[:port] pairs of remote hosts that are part of the Oracle Notification Service network but are not part of the Oracle Clusterware cluster

Note: If port is not specified for a remote host, then ons_remote_port is used.

-remoteservers host_port_list

A list of host[:port] pairs for Oracle Notification Service daemons on servers that are not in the cluster.

-verbose

Verbose output

Usage Notes

  • On Linux and UNIX systems, you must be logged in as root and on Windows, you must be logged in as a user with Administrator privileges to run this command.

  • This command is only available with Oracle Clusterware.

Example

An example of this command is:

# srvctl add nodeapps -node crmnode1 -address 1.2.3.4/255.255.255.0
srvctl config nodeapps

Displays the VIP configuration for each node in the cluster.

Note:

This command is only available with Oracle Clusterware.

Syntax

srvctl config nodeapps [-viponly] [-onsonly]

Usage Notes

Use -viponly to display the VIP address configuration. Use -onsonly to display the Oracle Notification Service configuration.

Example

An example of this command is:

$ srvctl config nodeapps -viponly -onsonly
srvctl disable nodeapps
Disables node applications on all nodes in the cluster.

Syntax

srvctl disable nodeapps [-gsdonly] [-adminhelper] [-verbose]

Parameters

Table A-51 srvctl disable nodeapps Command Parameters

Parameter Description
-gsdonly

Optionally, you can use this parameter to disable only the global services daemon (GSD).

-adminhelper

Optionally, you can use this parameter to disable the Administrator helper only.

–verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this parameter with Oracle Clusterware.

Example

The following example disables GSD:

$ srvctl disable nodeapps -gsdonly -verbose
srvctl enable nodeapps
Enables the node applications on all nodes in the cluster.

Syntax

srvctl enable nodeapps [-gsdonly] [-adminhelper] [-verbose]

Parameters

Table A-52 srvctl enable nodeapps Command Parameters

Parameter Description
-gsdonly

Optionally, you can use this parameter to enable only the global services daemon (GSD).

-adminhelper

Optionally, you can use this parameter to enable the Administrator helper only.

–verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example enables GSD:

$ srvctl enable nodeapps -gsdonly -verbose
srvctl getenv nodeapps
Displays the environment variables for the node application configurations.

Syntax

srvctl getenv nodeapps [-viponly] [-onsonly] [-envs "name_list"]

Parameters

Table A-53 srvctl getenv nodeapps Command Parameters

Parameter Description
-viponly

Optionally, you can use this parameter to display the VIP address configuration.

-onsonly

Optionally, you can use this parameter to isplay the Oracle Notification Service configuration.

-envs "name_list"

Optionally, you can specify a comma-delimited list of the names of environment variables enclosed in double quotation marks ("").

If you do not use this parameter, then SRVCTL displays the values of all environment variables associated with the node applications.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example lists all environment variables for the node applications:

$ srvctl getenv nodeapps -viponly
srvctl modify nodeapps
Modifies the configuration for a node application.

Syntax

Use this command with one of the following syntax models, specifying either a specific node and VIP or a specific subnet and netmask:

srvctl modify nodeapps {[-node node_name -address {vip_name|vip_address}/
  netmask[/if1[|if2|...]] [-skip]} [-nettype network_type] [-emport em_port]
    [-onslocalport ons_local_port] [-onsremoteport ons_remote_port] 
    [-remoteservers host:[port][,...]] [-verbose]
    [-clientdata file] [-pingtarget "ping_target_list"]
srvctl modify nodeapps [-subnet subnet/netmask[/if1[|if2|...]]]
    [-nettype network_type] [-emport em_port]
    [-onslocalport ons_local_port] [-onsremoteport ons_remote_port]
    [-remoteservers host:[port][,host:port,...]] [-verbose]
    [-clientdata file] [-pingtarget "ping_target_list"]

Parameters

Table A-54 srvctl modify nodeapps Command Parameters

Parameter Description
-node node_name

Specify the name of the node on which the node application you want to modify resides.

-address {vip_name|vip_address}/ netmask[/if1[|if2|...]]

Specify a node-level virtual IP name or address. The address specified by name or IP must match the subnet number of the default network.

Note: You must use this parameter for upgrade configurations and new non-DHCP configurations

–skip

Optionally, you can use this parameter to skip checking the reachability of the VIP address.

-subnet subnet/netmask[/if1[|if2|...]]

Alternative to specifying a node name and address, you can specify a subnet number for the public network. The netmask and interfaces you specify, if any, change those of the default network. Additionally, if you specify a value for the netmask option, then you need only specify it for the first node on each network.

-nettype network_type

Optionally, you can change the network server type to static, dhcp, or mixed.

-emport em_port

Optionally, you can change the local port on which Oracle Enterprise Manager listens.

Note: You can also modify this attribute using Online Resource Attribute Modification.

-onslocalport ons_local_port

Optionally, you can change the port on which the Oracle Notification Service daemon listens for local client connections.

Notes:

  • The local port and remote port must each be unique.

  • You can modify the local port while the resource remains online, without restarting the resource.

-onsremoteport ons_remote_port

Optionally, you can change the port on which the Oracle Notification Service daemon listens for connections from remote hosts.

Notes:

  • The local port and remote port must each be unique.

  • You can modify the remote port while the resource remains online, without restarting the resource.

-remoteservers host:[port][,...]

Optionally, you can modify the comma-delimited list of host:[port pairs of remote hosts that are part of the Oracle Notification Service network but are not part of the cluster. If you do not specify a port for a remote host, then the utility uses the value you specified for ons_remote_port.

-clientdata file

Optionally, you can specify the file with a wallet to import, or an empty string to delete a wallet used for SSL to secure Oracle Notification Service communication.

-pingtarget "ping_target_list"

Optionally, you can specify a comma-delimited list of IPs or host names enclosed in double quotation marks ("") to ping.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example changes the nodeapps resource on mynode1 to use the application VIP of 100.200.300.40 with a subnet mask of 255.255.255.0 on the network interface eth0:

$ srvctl modify nodeapps -node mynode1 -addr 100.200.300.40/255.255.255.0/eth0
srvctl remove nodeapps
Removes the node application configuration.

Syntax

srvctl remove nodeapps [-force] [-noprompt] [-verbose]

Parameters

Table A-55 srvctl remove nodeapps Command Parameters

Parameter Description
-force

Optionally, you can use this parameter to forcibly remove node application configurations, regardless of any dependencies.

-noprompt

Optionally, you can use this parameter to suppress prompts.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • You must have full administrative privileges to run this command. On Linux and UNIX systems, you must be logged in as root and on Windows systems, you must be logged in as a user with Administrator privileges.

srvctl setenv nodeapps
Sets the environment variables for the node application configurations.

Syntax

srvctl setenv nodeapps {-envs "name=val[,...]" | -env "name=val"}
   [-viponly] [-gsdonly] [-onsonly] [-verbose]

Parameters

Table A-56 srvctl setenv nodeapps Command Parameters

Parameter Description
-envs "name=val[,...]"

Use this parameter to specify a comma-delimited list of name-value pairs of environment variables enclosed in double quotation marks ("").

-env "name=val"

Alternatively, you can use this parameter to enable a single environment variable that is set to a value which contains commas or other special characters, enclosed in double quotation marks ("").

-viponly

Optionally, you can use this parameter to modify only the VIP configuration.

-gsdonly

Optionally, you can use this parameter to modify only the GSD configuration.

-onsonly

Optionally, you can use this parameter to modify only the ONS daemon configuration.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example sets the CLASSPATH environment variable for all node applications:

$ srvctl setenv nodeapps -env "CLASSPATH=/usr/local/jdk/jre/rt.jar" -verbose
srvctl start nodeapps
Starts node-level applications on a node or all nodes in the cluster.

Syntax

srvctl start nodeapps [-node node_name] [-gsdonly] [-adminhelper] [-verbose]

Parameters

Table A-57 srvctl start nodeapps Command Parameters

Parameter Description
-node node_name

Optionally, you can specify a node on which to start node-level applications.

If you do not use this parameter, then SRVCTL starts the node applications on all active nodes in the cluster.

-gsdonly

Optionally, you can use this parameter to start only GSD, instead of all node applications.

-adminhelper

Optionally, you can use this parameter to start only an Administrator helper instead of all node applications.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

srvctl status nodeapps
Displays the status of node applications.

Syntax

srvctl status nodeapps [-node node_name]

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Optionally, you can specify a node for which to display the status of the node applications.

srvctl stop nodeapps
Stops node-level applications on a node in the cluster.

Syntax

srvctl stop nodeapps [-node node_name] [-gsdonly] [-adminhelper] [-force]
   [-relocate] [-verbose]

Parameters

Table A-58 srvctl stop nodeapps Command Parameters

Parameter Description
-node node_name

Optionally, you can use this parameter to specify a node on which you want to stop node applications.

If you do not use this parameter, then the utility stops the node applications on all active nodes in the cluster.

-gsdonly

Optionally, you can use this parameter to stop only the GSD, instead of all node applications.

-adminhelper

Optionally, you can use this parameter to stop only the Administrator helper instead of all node applications.

-force

Optionally, you can use this parameter to stop node applications regardless of any dependencies.

-relocate

Optionally, you can use this parameter to relocate the VIP and possibly-dependent services.

Note: If you use this parameter, then you must also specify the -node node_name parameter.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

srvctl unsetenv nodeapps
Unsets the environment configuration for the node applications.

Syntax

srvctl unsetenv nodeapps -envs "name_list" [-viponly] [-gsdonly] [-onsonly]
   [-verbose]

Parameters

Table A-59 srvctl unsetenv nodeapps Command Parameters

Parameter Description
-envs "name_list"

Specify a comma-delimited list of the names of environment variables enclosed in double quotation marks ("") that you want to unset.

-viponly

Optionally, you can use this parameter to unset only the VIP configuration.

-gsdonly

Optionally, you can use this parameter to unset only the GSD configuration.

-onsonly

Optionally, you can use this parameter to unset only the ONS daemon configuration.

-verbose

Optionally, you can use this parameter to display detailed output.

Example

The following example unsets the environment configuration for the specified node applications:

$ srvctl unsetenv nodeapps -envs "test_var1,test_var2"

ons Commands

Use commands with the ons keyword to manage only Oracle Notification Service instances for Oracle Restart.

You can add, configure, enable, start, obtain the status of, stop, disable, and remove Oracle Notification Service instances for Oracle Restart.

srvctl add ons

Adds an Oracle Notification Service daemon to an Oracle Restart configuration.

Syntax

srvctl add ons [-emport em_port] [-onslocalport ons_local_port] [-onsremoteport ons_remote_port]
   [-remoteservers host[:port][,host[:port]...]] 
   [-clientcluster cluster_name] [-clientdata filename]

Parameters

Table A-60 srvctl add ons Command Parameters

Parameter Description
-emport em_port

Local listen port for Oracle Enterprise Manager. The default port number is 2016.

-onslocalport ons_local_port

Optionally, you can specify the Oracle Notification Service daemon listening port for local client connections.

Note: The local port and remote port must each be unique.

-onsremoteport ons_remote_port

Optionally, you can specify the Oracle Notification Service daemon listening port for connections from remote hosts.

Note: The local port and remote port must each be unique.

-remoteservers host[:port][host[:port]...]

Optionally, you can specify a comma-delimited list of host:port pairs of remote hosts that are part of the Oracle Notification Service network but are not part of the Oracle Clusterware cluster.

Note: If port is not specified for a remote host, then ons_remote_port is used.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

-clientdata filename

Specify the path to the file to which credentials data will be written.

Usage Notes

You can only use this command with Oracle Restart.

Example

An example of this command is:

$ srvctl add ons -onslocalprt 6200
srvctl config ons

Displays configuration information for the Oracle Notification Service daemon.

Syntax

srvctl config ons [-all] [-clientcluster cluster_name]

Usage Notes

  • You can only use this command with Oracle Restart.

  • You can display the configuration for all ONS daemons, or those for a specific client cluster.

srvctl disable ons

Disables the Oracle Notification Service (ONS) daemon for Oracle Restart installations.

Syntax

srvctl disable ons [-clientcluster cluster_name] [-verbose]

Usage Notes

  • You can only use this command with Oracle Restart.

  • You can disable all ONS daemons, or those for a specific client cluster.

  • Optionally, you can use the -verbose parameter to display detailed output.

srvctl enable ons
Enables the Oracle Notification Service daemon.

Syntax

srvctl enable ons [-clientcluster cluster_name] [-verbose]

Usage Notes

  • You can only use this command with Oracle Restart.

  • You can enable all ONS daemons, or those for a specific client cluster.

  • Optionally, you can use the -verbose parameter to display detailed output.

srvctl export ons

Exports ONS server information into a file.

Syntax

srvctl export ons -clientcluster cluster_name -clientdata filename

Parameters

Table A-61 srvctl export ons Command Parameters

Parameter Description
-clientcluster cluster_name

Specify the cluster name.

-clientdata filename

Specify the path to the file to which credentials data will be written.

srvctl modify ons
Modifies the ports used by the Oracle Notification Service daemon that is registered with Oracle Restart.

Syntax

srvctl modify ons [-emport em_port] [-onslocalprt ons_local_port] [-onsremoteport ons_remote_port]
  [-remoteservers host[:port][,host[:port],...]] 
  [-clientcluster cluster_name] [-verbose]

Parameters

Table A-62 srvctl modify ons Command Parameters

Parameter Description
-emport em_port

Optionally, you can specify the local port on which Oracle Enterprise Manager listens. The default port is 2016.

-onslocalprt ons_local_port

Optionally, you can modify the Oracle Notification Service daemon listening port for local client connections.

Note: The local port and remote port must each be unique.

-onsremoteport ons_remote_port

Optionally, you can modify the Oracle Notification Service daemon listening port for connections from remote hosts.

Note: The local port and remote port must each be unique.

-remoteservers host[:port][,host[:port],...]

Optionally, you can specify a list of host:port pairs of remote hosts that are part of the Oracle Notification Service network but are not part of the Oracle Clusterware cluster.

Note: If you do not specify port for a remote host, then SRVCTL uses the value for ons_remote_port.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Restart.

Example

An example of this command is:

$ srvctl modify ons -onslocalprt 6203
srvctl remove ons
Removes Oracle Notification Service from the Oracle Grid Infrastructure home.

Syntax

srvctl remove ons [-clientcluster cluster_name] [-force] [-verbose]

Usage Notes

  • You can only use this command with Oracle Restart.

  • If using the shared SCAN feature, then use the -clientcluster parameter to specify the name of the cluster that is running the shared SCAN listener.

  • Optionally, you can use the –force parameter to remove Oracle Notification Service regardless of dependencies.

  • Optionally, you can use the –verbose parameter to display detailed output.

srvctl start ons
Starts the Oracle Notification Service daemon.

Syntax

srvctl start ons [-clientcluster cluster_name] [-verbose]

Usage Notes

  • You can only use this command with Oracle Restart.

  • You can enable all ONS daemons, or those for a specific client cluster.

  • Optionally, you can use the -verbose parameter to display detailed output.

srvctl status ons
Displays the current state of the Oracle Notification Service daemon.

Syntax

srvctl status ons [-clientcluster cluster_name]

Usage Notes

  • You can only use this command with Oracle Restart.

  • You can display the status for all ONS daemons, or those for a specific client cluster.

srvctl stop ons
Stops the Oracle Notification Service daemon.

Syntax

srvctl stop ons [-clientcluster cluster_name] [-force]

Usage Notes

  • You can only use this command with Oracle Restart.

  • You can stop all ONS daemons, or those for a specific client cluster.

  • Optionally, you can use the –force parameter to stop the ONS daemons regardless of any dependencies.

pdb Commands

Use commands with the pdb keyword to manage the pluggable databases (PDBs) in your cluster database.

You can add, modify, remove, list the configuration of, enable, disable, start, stop, and obtain the status of PDBs.

Note:

PDB cluster resource commands cannot be used with policy-managed databases.
srvctl add pdb

Adds a pluggable database (PDB) configuration to Oracle Clusterware.

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl add pdb -db db_unique_name -pdb pdb_name 
     [-cardinality {num_of_instances | ALL}] 
     [-maxcpu max_cpu_usage] [-mincpuunit min_cpu_usage] 
     [-approot approot_database] [-startoption start_options]
     [-stopoption stop_options] [-policy policy]

Parameters

Table A-63 srvctl add pdb Command Parameters

Parameter Description
-db db_unique_name

The unique name of the container database (CDB).

-pdb pdb_name

The name of the PDB.

-cardinality {num_of_instances | ALL}

The number of instances of the PDB to be open at any time. If you specify ALL, then the PDB can open in any or all instances of the cluster database.

Note:

If this parameter is not set, then the PDB can run on any node on which the cluster database can run. Where the PDB runs is determined by the preferred and available lists of the PDB services. If this parameter is set, then the PDB services must be UNIFORM, SINGLETON, or DUPLEX.
-maxcpu max_cpu_usage

The maximum CPU usage limit for the PDB.

-mincpuunit min_cpu_usage

The minimum CPU usage limit for the PDB.

-approot approot_database

The application root PDB.

-startoption start_options

Startup options for the PDB, such as OPEN or OPEN READ ONLY. The default value is an empty string, which means the PDB uses the same open mode as the CDB.

Note:

For multi-word startup options, such as read only and read write, separate the words with a space and enclose in double quotation marks (""). For example, "read only".

-stoption stop_options

Stop options for the PDB, such as NORMAL. The default stop option is IMMEDIATE.

-policy policy

Management policy for the pluggable database, where policy can be one of the following values:

  • AUTOMATIC (default): The PDB is automatically restored to its previous running condition (started or stopped) upon restart of the database host computer. The PDBs are also started automatically when the database is started with the srvctl start database command.
  • MANUAL: The PDB is never automatically restarted upon restart of the database host computer. A MANUAL setting does not prevent Oracle Clusterware from monitoring the PDB while it is running and restarting it if a failure occurs.
  • RESTART: The PDB is restarted upon restart of the database host computer.

Usage Notes

If a PDB's management policy is RESTART, then the management policy for the CDB must be RANK.

Related Topics

srvctl config pdb

Displays the configuration information for a pluggable database (PDB).

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl config pdb -db db_unique_name [-pdb pdb_name] [-detail]

Parameters

Table A-64 srvctl config pdb Command Parameters

Parameter Description
-db db_unique_name

Unique name for the container database.

-pdb pdb_name

The name of the PDB.

-detail

Print detailed configuration information.

Example

This examples shows the configuration information for the crmeast PDB.

srvctl config pdb -db crm -pdb crmeast

Pluggable database name: crmeast
Application Root PDB: 
Cardinality: %CRS_SERVER_POOL_SIZE%
Maximum CPU count (whole CPUs): 0
Minimum CPU count unit (1/100 CPU count): 0
Start Option: open
Stop Option: immediate
srvctl disable pdb

Disables a running pluggable database (PDB) from Oracle Clusterware management.

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl disable pdb -db db_unique_name -pdb pdb_name [-node node_name]

Parameters

Table A-65 srvctl disable pdb Command Parameters

Parameter Description
-db db_unique_name

The unique name of the container database (CDB).

-pdb pdb_name

The name of the PDB.

-node node_name

The node on which you want to disable the PDB.

Note: You can only use this parameter only with Oracle Clusterware.

Example

The following example disables the PDB crmeast:

srvctl disable pdb -db crm -pdb crmeast
srvctl enable pdb

Enables the pluggable database (PDB) for Oracle Clusterware management.

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl enable pdb -db db_unique_name -pdb pdb_name [-node node_name]

Parameters

Table A-66 srvctl enable pdb Command Parameters

Parameter Description
-db db_unique_name

The unique name of the container database.

-pdb pdb_name

The name of the PDB that you want to enable.

-node node_name

The name of the node on which the PDB resource resides that you want to enable.

Note: You can only use this parameter with Oracle Clusterware.

Example

The following example enables a PDB named crmeast for Oracle Clusterware management:

srvctl enable pdb -db crm -pdb crmeast
srvctl modify pdb

Modifies the configuration for a pluggable database (PDB).

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl modify pdb -db db_unique_name -pdb pdb_name 
     [-cardinality {num_of_instances | ALL}]
     [-maxcpu max_cpu_usage] [-mincpuunit min_cpu_usage] 
     [-rank rank] [-startoption start_options] 
     [-stopoption stop_options] [-policy policy]

Parameters

Table A-67 srvctl modify pdb Command Parameters

Parameter Description
-db db_unique_name

Unique name for the container database (CDB).

-pdb pdb_name

The name of the PDB.

-cardinality {num_of_instances | ALL}

The number of instances of the PDB to be open at any time. If you specify ALL, then a PDB is open in every available container database (CDB) in the cluster database.

-maxcpu max_cpu_usage

The maximum CPU usage limit for the PDB in whole CPUs. Specify a positive integer value that is equal to or greater than 1.

You must be logged in as either the grid or the root user to modify this parameter.

-mincpuunit min_cpu_usage

The minimum CPU usage limit for the PDB. Specify a positive integer value that is equal to or greater than 10. The value must be in hundredths of the total CPU count (1/100 CPU count).

You must be logged in as either the grid or the root user to modify this parameter.

-rank rank

The rank of the PDB. The range of values you can specify for this parameter is 0 to 5. The default value is 0.

You must be logged in as either the grid or the root user to modify this parameter.

-startoption start_options

Startup options for the PDB, such as OPEN or OPEN READ ONLY. The default value is an empty string, which means the PDB uses the same open mode as the CDB.

Note:

For multi-word startup options, such as read only and read write, separate the words with a space and enclose in double quotation marks (""). For example, "read only".

-stoption stop_options

Stop options for the PDB, such as NORMAL. The default stop option is IMMEDIATE.

-policy policy

Management policy for the pluggable database, where policy can be one of the following values: AUTOMATIC, MANUAL, or RESTART.

srvctl remove pdb

Removes the pluggable database (PDB) configuration from Oracle Clusterware management.

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl remove pdb -db db_unique_name -pdb pdb_name 
    [-force] [-noprompt] [-verbose]

Parameters

Table A-68 srvctl remove pdb Command Parameters

Parameter Description
-db db_unique_name

Unique name of the container database (CDB).

-pdb pdb_name

The name of the PDB.

-force

Forcibly remove the PDB and ignore any dependencies.

-noprompt

Suppress prompts.

-verbose

Display verbose output.

Example

This example shows how to remove a PDB named crmeast in the container database named crm.

$ srvctl remove pdb -db crm -pdb crmeast
srvctl start pdb

Starts a pluggable database (PDB).

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl start pdb -db db_unique_name -pdb pdb_name 
  [-startoption start_options] [-node node_list]

Parameters

Table A-69 srvctl start pdb Command Parameters

Parameter Description
-db db_unique_name

The unique name of the database to start.

-pdb pdb_name The name of the PDB to start.
-startoption start_options

Options for the startup command, such as READ ONLY or OPEN.

Notes:

  • This command parameter supports all PDB startup options.

  • For multi-word startup options, such as READ ONLY and READ WRITE, separate the words with a space and enclose in double quotation marks (""). For example, "READ ONLY".

    See Also: STARTUP command in SQL*Plus User's Guide and Reference

-node node_list

Comma-separated list of nodes on which to start the PDB.

Examples

The following example starts the crmeast PDB in READ ONLY mode:

srvctl start pdb -db crm -pdb crmeast -startoption "read only"
srvctl status pdb

This command displays the current state of the pluggable database (PDB).

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl status pdb -db db_unique_name [-pdb pdb_name]
    [-detail]

Parameters

Table A-70 srvctl status pdb Parameters

Parameter Description
-db db_unique_name

The unique name of the container database (CDB).

-pdb pdb_name

The name of the PDB. If you do not specify a PDB name, then information on all the PDBs in that particular database are displayed.

–detail

Display detailed status information.

Examples

This example shows sample output for the status information for the crmeast and crmnorth PDBs.

$ srvctl status pdb -db crm -pdb crmeast

Pluggable database crmeast of crm is running on nodes site1, site3.

$ srvctl status pdb -db crm -pdb crmnorth

Pluggable database crmnorth of crm is not running.
srvctl stop pdb

Stops a pluggable database (PDB) and its services.

Note:

PDB cluster resource commands cannot be used with policy-managed databases.

Syntax

srvctl stop pdb -db db_unique_name -pdb pdb_name [-node node_name]
  [-stopoption stop_options] [-drain_timeout timeout] 
  [-stopsvcoption stop_service_options] [-force]

Parameters

Table A-71 srvctl stop pdb Command Parameters

Parameter Description
-db db_unique_name

The unique name for the container database.

-pdb pdb_name

The name of the PDB to stop.

-node node_name

The name of the node on which to stop the PDB. If you do not specify any nodes, then the specified PDB is stopped on all the nodes where the PDB is running.

-stopoption stop_options

Options for the shutdown command, such as NORMAL or IMMEDIATE. The default value is IMMEDIATE.

-drain_timeout timeout

The time, in seconds, for the resource draining action to complete. By default, this parameter is not set. You can specify 0 or any positive integer. An empty string unsets the parameter. If you specify zero, then the agent will perform the actions related to service draining, immediately.

Drain timeout is the maximum time the service waits before exiting (in case of srvctl stop service or srvctl stop instance) or proceeding to stop database (srvctl stop database or srvctl stop pdb), until the draining of sessions is completed. If session draining completes in 10 seconds and the drain timeout value is 100 seconds, then SRVCTL continues after 10 seconds. It does not wait for the remaining 90 seconds.

-stopsvcoption stop_service_options

Options for stopping services, such as TRANSACTIONAL or IMMEDIATE. If you do not specify this open, then the stop option set in the service resource attribute USR_ORA_STOP_MODE is used.

-force

Use this parameter to force stop the PDB and its services, and any dependent resources.

Example

The following command stops a PDB named crmeast that is open in the crm database, allowing 50 seconds for all sessions to drain from the PDB:

srvctl stop pdb -db crm -pdb crmeast -drain_timeout 50

scan Commands

Use commands with the scan keyword to add, list the configuration of, modify, enable, disable, start, stop, relocate, obtain the status of, and remove SCAN VIPs.

srvctl add scan

Adds Oracle Clusterware resources for the given SCAN.

Syntax

srvctl add scan -scanname scan_name [-netnum network_number]

Parameters

Table A-72 srvctl add scan Command Parameters

Parameter Description
-scanname scan_name

A fully-qualified host name, which includes the domain name. If the network is dynamic, then you do not have to use fully-qualified host name but, if you choose to do so, then the domain must be the GNS subdomain.

Note: You can modify this attribute using Online Resource Attribute Modification.

-netnum network_number

The optional network number from which SCAN VIPs are obtained. If you do not specify this parameter, then the SCAN VIPs are obtained from the same default network from which the nodeapps VIP is obtained.

Usage Notes

  • This command creates the same number of SCAN VIP resources as the number of IP addresses that SCAN resolves to, or 3 when network_number identifies a dynamic network and Oracle GNS configuration.

  • For static networks, the addresses to which the SCAN resolves in DNS must match the address type of the subnet.

  • For an IPv4 network, the SCAN must resolve to IPv4 addresses.

  • This command is only available with Oracle Clusterware.

Example

An example of this command is:

# srvctl add scan -scanname scan.mycluster.example.com
srvctl config scan

Displays the configuration information for all SCAN VIPs, by default, or a specific SCAN VIP identified by ordinal_number.

Syntax

srvctl config scan [[-netnum network_number] [-scannumber ordinal_number] | -all]

Parameters

Table A-73 srvctl config scan Command Parameters

Parameter Description
-netnum network_number

Use this parameter to view the configuration of a specific SCAN VIP.

-scannumber ordinal_number

Use this parameter to specify any one of the three SCAN VIPs, using values from 1 to 3, for which you want to view the configuration.

-all

Alternative to specifying network or ordinal numbers, you can use this parameter to view the configuration for all of the SCAN VIPs.

Usage Notes

This command is only available with Oracle Clusterware.

Example

This command returns output similar to the following:

$ srvctl config scan -scannumber 1

SCAN name: mjk12700890090-r, Network: 1
Subnet IPv4: 198.51.100.1/203.0.113.46/eth0, static
Subnet IPv6: 
SCAN 1 IPv4 VIP: 198.51.100.195
SCAN VIP is enabled.
SCAN VIP is individually enabled on nodes:
SCAN VIP is individually disabled on nodes:
srvctl disable scan
Disables all SCAN VIPs, by default, or a specific SCAN VIP identified by ordinal_number.

Syntax

srvctl disable scan [-scannumber ordinal_number]

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Optionally, you can use the -scannumber parameter to specify any one of the three SCAN VIPs you want to disable. The parameter takes a range of values from 1 to 3.

Example

The following example disables the first SCAN VIP:

$ srvctl disable scan -scannumber 1
srvctl enable scan
Enables all SCAN VIPs, by default, or a specific SCAN VIP identified by its ordinal number.

Syntax

srvctl enable scan [-scannumber ordinal_number]

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Optionally, you can use the -scannumber parameter to specify any one of the three SCAN VIPs you want to enable. The parameter takes a range of values from 1 to 3.

Example

The following example enables the first SCAN VIP:

$ srvctl enable scan -scannumber 1
srvctl modify scan
Modifies the number of SCAN VIPs to match the number of IP addresses returned by looking up the scan_name you specify in DNS.

You use this command when DNS was modified to add, change, or remove IP addresses, and now you must adjust the Oracle Clusterware resource configuration to match.

Syntax

srvctl modify scan -scanname scan_name [-netnum network_number]

Parameters

Table A-74 srvctl modify scan Command Parameters

Parameter Description
-scanname scan_name

Identifies the SCAN name that resolves to the SCAN VIPs that you want to modify.

Note: You can modify this attribute using Online Resource Attribute Modification.

-netnum network_number

The optional network number from which VIPs are obtained. If not specified, the VIPs are obtained from the same default network from which the nodeapps VIP is obtained.

Example

Assume your system currently has a SCAN named scan_name1, and it resolves to a single IP address in DNS. If you modify the SCAN scan_name1 in DNS to resolve to three IP addresses, then use the following command to create the additional SCAN VIP resources:

$ srvctl modify scan -scanname scan_name1
srvctl predict scan
Predicts the consequences of SCAN failure.

Syntax

srvctl predict scan -scannumber ordinal_number [-verbose]

Usage Notes

  • Specify an ordinal number that identifies the SCAN VIP for which you want to simulate failure. The range of values you can specify for this parameter is 1 to 3.

  • Optionally, you can use the –verbose parameter to display detailed output.

Add additional information about the command here.

srvctl relocate scan
Relocates a specific SCAN VIP from its current hosting node to another node within the cluster.

Syntax

srvctl relocate scan -scannumber ordinal_number [-node node_name]

Parameters

Table A-75 srvctl relocate scan Command Parameters

Parameter Description
-scannumber ordinal_number

Specify an ordinal number that identifies which SCAN VIP you want to relocate. The range of values you can specify for this parameter is 1 to 3.

-node node_name

Optionally, you can specify the name of a single node to which SRVCTL relocates the SCAN VIP.

If you do not use this parameter, then SRVCTL chooses the node to which the SCAN VIP is relocated.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example relocates the first SCAN VIP to node1:

$ srvctl relocate scan -scannumber 1 -node node1
srvctl remove scan
Removes Oracle Clusterware resources from all SCAN VIPs.

Syntax

srvctl remove scan [-netnum network_number] [-force] [-noprompt]

Parameters

Table A-76 srvctl remove scan Command Parameters

Parameter Description
-netnum network_number

The optional network number from which VIPs are obtained. If not specified, the VIPs are obtained from the same default network from which the nodeapps VIP is obtained.

–force

Removes the SCAN VIPs even though there are SCAN listeners running that are dependent on the SCAN VIPs.

–noprompt

Use this parameter to suppress all prompts.

Usage Notes

If you use the -force option, then SCAN VIPs that are running are not stopped before the dependent resources are removed, which may require manual cleanup.

Examples

An example of this command is:

$ srvctl remove scan -force
srvctl start scan
Starts all SCAN VIPs, by default, or a specific SCAN VIP, on all nodes or a specific node in the cluster.

Syntax

srvctl start scan [-scannumber ordinal_number] [-node node_name]

Parameters

Table A-77 srvctl start scan Command Parameters

Parameter Description
-scannumber ordinal_number

Optionally, you can specify an ordinal number that identifies which SCAN VIP you want to start. The range of values you can specify for this parameter is 1 to 3.

If you do not use this parameter, then SRVCTL starts all the SCAN VIPs.

-node node_name

Optionally, you can specify the name of a single node on which the SCAN VIP resides that you want to start.

If you do not specify this parameter, then SRVCTL starts the SCAN VIPs on all nodes in the cluster.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example starts the SCAN VIP identified by the ordinal number 1 on the crm1 node:

$ srvctl start scan -scannumber 1 -node crm1
srvctl status scan
Displays the status for all SCAN VIPs, by default, or a specific SCAN VIP.

Syntax

srvctl status scan [-scannumber ordinal_number] [-verbose]

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Optionally, you can specify an ordinal number that identifies a specific SCAN VIP for which you want to display the status. The range of values you can specify for this parameter is 1 to 3. If you do not use this parameter, then SRVCTL displays the status of all SCAN VIPs in the cluster.

  • Optionally, you can use the –verbose parameter to display detailed output.

srvctl stop scan
Stops all SCAN VIPs, by default, that are running or in starting state, or stops a specific SCAN VIP identified by an ordinal number.

Syntax

srvctl stop scan [-scannumber ordinal_number] [-force]

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Optionally, you can specify an ordinal number that identifies which SCAN VIP you want to stop. The range of values you can specify for this parameter is 1 to 3. If you do not use this parameter, then SRVCTL stops all the SCAN VIPs.

  • Optionally, you can use the –force parameter to stop the SCAN VIPs regardless of any dependencies.

Example

The following example stops the SCAN VIP identified by the ordinal number 1:

$ srvctl stop scan -scannumber 1

scan_listener Commands

Use commands with the scan_listener keyword to add, list the configuration of, modify, enable, disable, start, stop, relocate, obtain the status of, and remove SCAN listeners.

srvctl add scan_listener

Adds Oracle Clusterware resources for the SCAN listeners.

Syntax

srvctl add scan_listener [-netnum network_number] [-listener lsnr_name_prefix] [-skip] 
  [-endpoints "[TCP:]port_list[/IPC:key][/NMP:pipe_name]
  [/{TCPS|SDP|EXADIRECT}port_list]"] 
  [-invitednodes "node_list"] [-invitedsubnets "subnet_list"]
  [-clientcluster cluster_name] [-clientdata <filename>]

Parameters

Table A-78 srvctl add scan_listener Command Parameters

Parameter Description
-netnum network_number

The optional network number from which SCAN VIPs are obtained. If you do not specify this parameter, then the SCAN VIPs are obtained from the same default network from which the nodeapps VIP is obtained.

-listener lsnr_name_prefix

The SCAN listener name prefix.

-skip

Skip checking of the ports.

-endpoints "[TCP:]port_list[/IPC:key] [/NMP:pipe_name][/{TCPS|SDP|EXADIRECT}port_list]"

Protocol specifications for the SCAN listener. Use port_list to specify a comma-delimited list of TCP ports or SCAN listener endpoints.

You can also specify endpoints for TCPS, SDP, and EXADIRECT ports.

Note: You can modify this attribute using Online Resource Attribute Modification.

-invitednodes "node_list"

A comma-delimited list of host names from outside the cluster that are allowed to register with the SCAN listener.

-invitedsubnets "subnet_list"

A comma-delimited list of subnets from outside the cluster that are allowed to register with the SCAN listener. You can specify the subnets using either CIDR notation or wildcards (such as 192.168.*).

-clientcluster cluster_name

The name of the cluster that is running the SCAN listener you want to share.

-clientdata file_name

The name of the cluster that is running the shared SCAN listener.

Usage Notes

  • The number of SCAN listener resources created is the same as the number of SCAN VIP resources.

  • This command is only available with Oracle Clusterware.

Example

An example of this command is:

# srvctl add scan_listener -listener myscanlistener
srvctl config scan_listener

Displays the configuration information for all SCAN listeners, by default, or a specific listener identified by network number or ordinal_number.

Syntax

srvctl config scan_listener [[-netnum network_number] [-scannumber ordinal_number] 
 [-clientcluster cluster_name] | -all]

Parameters

Table A-79 srvctl config scan_listener Command Parameters

Parameter Description
-netnum network_number

Use this parameter to view the configuration of the listener for a specific SCAN VIP.

-scannumber ordinal_number

Use this parameter to specify any one of the three SCAN VIPs, using values from 1 to 3, for which you want to view the configuration of the listener.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

–all

Alternative to specifying network or ordinal numbers, you can use this parameter to view the configuration of the listeners for all of the SCAN VIPs.

Usage Notes

This command is only available with Oracle Clusterware.

Example

This command returns output similar to the following:

$ srvctl config scan_listener -scannumber 1

SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1529
Registration invited nodes:
Registration invited subnets:
SCAN Listener is enabled.
SCAN Listener is individually enabled on nodes:
SCAN Listener is individually disabled on nodes:
srvctl disable scan_listener
Disables all SCAN listeners, by default, or a specific listener identified by an ordinal number or client cluster.

Syntax

srvctl disable scan_listener [-netnum network_number] [-scannumber ordinal_number]
  [-clientcluster cluster_name]

Parameters

Table A-80 srvctl disable scan_listener Command Parameters

Parameter Description
-netnum network_number

Use this parameter to disable SCAN listeners for a specific network number.

-scannumber ordinal_number

Use this parameter to disable any one of the three SCAN VIPs, using values from 1 to 3. If you do not use this parameter, then SRVCTL disables all SCAN listeners.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

Usage Notes

This command is only available with Oracle Clusterware.

Example

The following example disables the SCAN listener identified as 1:

$ srvctl disable scan_listener -scannumber 1
srvctl enable scan_listener
Enables all SCAN listeners, by default, or a specific listener identified by its ordinal number.

Syntax

srvctl enable scan_listener [-netnum network_number] [-scannumber ordinal_number]
  [-clientcluster <cluster_name>]

Parameters

Table A-81 srvctl enable scan_listener Command Parameters

Parameter Description
-netnum network_number

Use this parameter to enable the listener for a specific SCAN VIP.

-scannumber ordinal_number

Use this parameter to enable any one of the three SCAN VIPs, using values from 1 to 3. If you do not use this parameter, then SRVCTL enables all SCAN listeners.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

Usage Notes

This command is only available with Oracle Clusterware.

Example

The following example enables the SCAN listener identified as 1:

$ srvctl enable scan_listener -scannumber 1
srvctl export scan_listener

Saves the SCAN listener configuration information to a file.

Syntax

srvctl export scan_listener -clientcluster cluster_name -clientdata filename

Parameters

Table A-82 srvctl export scan_listener Command Parameters

Parameter Description
-clientcluster cluster_name

Specify the cluster name.

-clientdata filename

Specify the path to the file to which credentials data will be written.

srvctl modify scan_listener
Modifies the SCAN listener to match that of the SCAN VIP, or modifies the SCAN listener endpoints or service registration restrictions.

Syntax

srvctl modify scan_listener {-update | -endpoints [TCP:]port_list[/IPC:key]
     [/NMP:pipe_name][/{TCPS|SDP|EXADIRECT}port_list]"} [-invitednodes "node_list"]
     [-invitedsubnets "subnet_list"] [-clientcluster cluster_name]

Parameters

Table A-83 srvctl modify scan_listener Command Parameters

Parameter Description
-update

Use this parameter to update SCAN listener configuration to match the current SCAN VIP configuration. This parameter adds new resources or removes existing SCAN listener resources to match the number of SCAN VIP resources.

-endpoints "[TCP:]port_list[/IPC:key] [/NMP:pipe_name][/{TCPS|SDP|EXADIRECT}port_list]"]

Protocol specifications for the SCAN listener. Use port_list to specify a comma-delimited list of TCP ports or listener endpoints.

You can also specify endpoints for TCPS, SDP, and EXADIRECT ports.

-invitednodes "node_list"

Use this parameter to specify a comma-delimited list of host names from outside the cluster that are allowed to register with the SCAN listener.

-invitedsubnets "subnet_list"

Use this parameter to specify a comma-delimited list of subnets from outside the cluster that are allowed to register with the SCAN listener. You can specify the subnets using either CIDR notation or wildcards (such as 192.168.*).

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

Example

Assume your system currently has a SCAN named scan_name1, and you recently modified the DNS entry to resolve to three IP addresses instead of one. After running the srvctl modify scan command to create additional SCAN VIP resources, use the following command to create Oracle Clusterware resources for the additional two SCAN listeners to go with the two additional SCAN VIPs:

$ srvctl modify scan_listener -update
srvctl predict scan_listener
Predicts the consequences of SCAN listener failure.

Syntax

srvctl predict scan_listener -scannumber ordinal_number [-verbose]

Usage Notes

  • Use the -scannumber parameter to specify any one of the three SCAN listeners for which you want to predict the consequences of a failure. The range of values you can specify for this parameter is 1 to 3.

  • Optionally, you can use the –verbose parameter to display detailed output.

srvctl relocate scan_listener
Relocates a specific SCAN listener from its current hosting node to another node within the cluster.

Syntax

srvctl relocate scan_listener -scannumber ordinal_number [-node node_name]

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Specify an ordinal number that identifies which SCAN listener you want to relocate. The range of values you can specify for this parameter is 1 to 3.

  • Optionally, you can specify the name of a single node to which you want to relocate the SCAN listener. If you do not specify this parameter, then SRVCTL chooses the node to which the SCAN listener is relocated.

Example

The following example relocates the SCAN listener identified as 3 to node2 of the cluster:

$ srvctl relocate scan_listener -scannumber 3 -node node2
srvctl remove scan_listener
Removes Oracle Clusterware resources from all SCAN listeners.

Syntax

srvctl remove scan_listener [-netnum network_number] [-clientcluster cluster_name]
  [-force] [-noprompt]

Parameters

Table A-84 srvctl remove scan_listener Command Parameters

Parameter Description
-netnum network_number

The optional network number from which SCAN VIPs are obtained. If you do not specify this parameter, then the SCAN VIPs are obtained from the same default network from which the nodeapps VIP is obtained.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

-force

Removes the SCAN listener without stopping the SCAN listener if it is running.

–noprompt

Use this parameter to suppress all prompts.

Example

An example of this command is:

$ srvctl remove scan_listener -force
srvctl start scan_listener
Starts all SCAN listeners, by default, or a specific listener on all nodes or a specific node in the cluster.

Syntax

srvctl start scan_listener [-netnum network_number] [-scannumber ordinal_number]
  [-node node_name] [-clientcluster cluster_name]

Parameters

Table A-85 srvctl start scan_listener Command Parameters

Parameter Description
-netnum network_number

Use this parameter to start SCAN listeners for a specific network number.

-scannumber ordinal_number

Use this parameter to start one of the three SCAN VIPs, using values from 1 to 3. If you do not use this parameter, then SRVCTL starts all SCAN listeners.

-node node_name

Specify the name of a single node on which you want to start a SCAN listener. If you do not use this parameter, then SRVCTL starts the SCAN listeners on all nodes in the cluster.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

Usage Notes

This command is only available with Oracle Clusterware.

Example

The following example starts the SCAN listener identified as 1:

$ srvctl start scan_listener -scannumber 1
srvctl status scan_listener

Displays the status for all SCAN listeners, by default, or a specific listener.

Syntax

srvctl status scan_listener [[-netnum network_number] [-scannumber ordinal_number] 
   | [-clientcluster cluster_name] | -all] [-verbose]

Parameters

Table A-86 srvctl status scan_listener Command Parameters

Parameter Description
-netnum network_number

The network number. The default network number is 1.

-scannumber ordinal_number

An ordinal number that identifies a specific SCAN listener. The range of values you can specify for this parameter is 1 to 3. If you do not use this parameter, then the utility displays the status of all SCAN listeners in the cluster.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

-all

Display the status for SCAN listeners for all networks.

-verbose

Display detailed information.

Usage Notes

This command is only available with Oracle Clusterware.

srvctl stop scan_listener
Stops all SCAN listeners, by default, that are in a running or starting state, or a specific listener identified by an ordinal number.

Syntax

srvctl stop scan_listener [-netnum network_number] [-scannumber ordinal_number] 
  [-clientcluster cluster_name] [-force]

Parameters

Table A-87 srvctl stop scan_listener Command Parameters

Parameter Description
-netnum network_number

Use this parameter to stop SCAN listeners for a specific network number.

-scannumber ordinal_number

Use this parameter to stop any one of the three SCAN VIPs, using values from 1 to 3. If you do not use this parameter, then SRVCTL stops all SCAN listeners.

-clientcluster cluster_name

The name of the cluster that is running the shared SCAN listener.

-force

Stops the SCAN listener regardless of any dependencies.

Usage Notes

This command is only available with Oracle Clusterware.

Example

The following example stops the SCAN listener identified as 1:

$ srvctl stop scan_listener -scannumber 1
srvctl update scan_listener
Updates the SCAN listeners to listen on the new endpoints.

Syntax

srvctl update scan_listener

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • This command does not accept any additional parameters, except for -help.

server Commands

Use commands with the server keyword to obtain the status of and relocate a server in a different server pool.

srvctl relocate server
Relocates servers to a server pool in the cluster.

Syntax

srvctl relocate server -servers "server_name_list" -serverpool pool_name
   [-eval] [-force]

Parameters

Table A-88 srvctl relocate server Command Parameters

Parameter Description
-servers "server_name_list"

Specify either a single server name or a comma-delimited list of server names enclosed in double quotation marks ("") that you want to relocate to a different server pool.

-serverpool pool_name

Specify the name of the server pool to which you want to move servers.

–eval

Optionally, you can use this parameter to hypothetically evaluate the impact of the command on the system.

–force

Optionally, you can use this parameter to force the relocation of servers even if it means stopping some resources.

Example

The following example relocates two servers to a different server pool:

$ srvctl relocate server -servers "server1, server2" -serverpool sp3
srvctl status server
Displays the current state of specific servers.

Syntax

srvctl status server -server "server_name_list" [-detail]

Usage Notes

  • Use the –server parameter to specify a single server name or a comma-delimited list of server names enclosed in double quotation marks ("") for which you want to check the status.

  • Optionally, you can use the –detail parameter to print detailed status information.

service Commands

Use commands with the service keyword to add, modify, list the configuration of, enable, disable, start, stop, obtain the status of, relocate, and remove services.

srvctl add service

Adds services to a database and assigns them to instances.

Syntax

Use this command with one of the following syntax models.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

To add a service to a database:

srvctl add service -db db_unique_name -service service_name_list 
   [-cardinality {UNIFORM | SINGLETON | DUPLEX} | -preferred "preferred_list" 
    [-available "available_list"] [-tafpolicy {BASIC | NONE | PRECONNECT}] |
    -serverpool server_pool [-cardinality {UNIFORM | SINGLETON}] ]
   [-netnum network_number] [-role "[PRIMARY][,PHYSICAL_STANDBY][,LOGICAL_STANDBY][,SNAPSHOT_STANDBY]"]
   [-policy {AUTOMATIC | MANUAL}] [-notification {TRUE | FALSE}] [-dtp {TRUE | FALSE}] 
   [-clbgoal {SHORT | LONG}] [-rlbgoal {NONE | SERVICE_TIME | THROUGHPUT}] [-resetstate {NONE | LEVEL1}]
   [-failovertype {NONE|SESSION|SELECT|TRANSACTION|AUTO}] [-failovermethod {NONE | BASIC}] [-failoverretry failover_retries]
   [-failoverdelay failover_delay] [-failover_restore {NONE|LEVEL1|AUTO}] [-failback {YES | NO}] 
   [-edition edition_name] [-pdb pdb_name] [-global {TRUE | FALSE}] [-maxlag max_lag_time] 
   [-sql_translation_profile sql_translation_profile] [-commit_outcome {TRUE|FALSE}] [-retention retention_time] 
   [-replay_init_time replay_initiation_time] [-session_state {STATIC | DYNAMIC | AUTO}] [-pqservice pq_service] 
   [-pqpool pq_pool] [-gsmflags gsm_flags] [-tablefamilyid table_family_id] 
   [-drain_timeout timeout] [-stopoption {NONE|IMMEDIATE|TRANSACTIONAL}] [-css_critical {yes | no}] 
   [-rfpool pool_name -hubsvc hub_service] [-force] [-eval] [-verbose]

To update the preferred and available lists of an existing service:

srvctl add service -db db_unique_name -service "service_name_list" 
   -update {-preferred "preferred_list" | -available "available_list"} [-force] 
   [-verbose]

Parameters

The following table lists and describes all the srvctl add service parameters and whether they can be used when adding a service to either an Oracle RAC database or non-cluster database.

Table A-89 srvctl add service Command Parameters

Parameter Description
-db db_unique_name

Unique name for the database.

-service service_name_list

The service_name.service_domain should be unique within the cluster unless you want to spread connections across multiple databases that offer the same service. If you do not specify the service domain as part of the service name (such as sales.example.com), then the DB_DOMAIN database attribute is appended to the service name. You can specify one service or several services in a comma-delimited list.

Note: The -service parameter has a 4 kilobyte (KB) limit for its value. Therefore, the total length of the names of all services assigned to an instance cannot exceed 4 KB.

-cardinality {UNIFORM | SINGLETON | DUPLEX}

The cardinality of the service, which can be one of the following:

  • UNIFORM – offered on all instances or PDBs in the database
  • SINGLETON – runs on only one instance or PDB at a time
  • DUPLEX – runs on two instances or PDBs at a time
Notes:
  • This parameter can be used only with Oracle RAC.
  • For policy-managed Oracle RAC One Node databases, all services must be SINGLETON.
-preferred "preferred_list"

A comma-separated list of preferred instances on which the service runs.

The list of preferred instances must be mutually exclusive with the list of available instances.

Note: This parameter can be used only with Oracle RAC and cannot be used with policy-managed databases.

-available "available_list"

A comma-separated list of available instances to which the service fails over.

The list of available instances must be mutually exclusive with the list of preferred instances.

Note: This parameter can be used only with Oracle RAC and cannot be used with policy-managed databases.

-tafpolicy {BASIC|NONE}

Transparent Application Failover (TAF) policy specification (cannot be used with policy-managed databases).

-serverpool server_pool

The name of a server pool used when the database is policy managed.

Notes:
  • This parameter can be used only with Oracle RAC and only for policy-managed databases.
  • Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.
-netnum network_number

Use this parameter to determine on which network this service is offered. The service is configured to depend on VIPs from the specified network.

Notes:
  • If you omit this parameter, then the default is taken from the database configuration, which you specify using srvctl add database or srvctl modify database, with the -defaultnetwork parameter to specify the default network for that database's services.
  • This parameter can be used only with Oracle RAC and Oracle RAC One Node database configurations.
-role "[PRIMARY][,PHYSICAL_STANDBY] [,LOGICAL_STANDBY][,SNAPSHOT_STANDBY]"

The service role. You can specify one or more roles in a comma-delimited list.

Use this option to indicate that the service should only be automatically started upon database open when the Oracle Data Guard database role matches one of the specified service roles.

Using SRVCTL to manually start a service is not affected by the service role.

Note: The -role parameter is only used at database startup and by the Oracle Data Guard Broker. All manual service startup must specify the name of the service to be started by the user.

-policy {AUTOMATIC | MANUAL}

Service management policy.

If AUTOMATIC (the default), then the service is automatically started upon restart of the database, either by a planned restart (with SRVCTL) or after a failure. Automatic restart is also subject to the service role, however (the -role parameter).

If MANUAL, then the service is never automatically restarted upon planned restart of the database (with SRVCTL). A MANUAL setting does not prevent Oracle Clusterware from monitoring the service when it is running and restarting it if a failure occurs.

Note: Using CRSCTL to stop and start the Oracle Clusterware restarts the service in the same way that a failure does.

-notification {TRUE | FALSE}

Enable Fast Application Notification (FAN) for OCI connections.

-dtp {TRUE | FALSE}

Indicates whether Distributed Transaction Processing should be enabled for this service. This service will either be a singleton service in a policy-managed database or a preferred service on a single node in an administrator-managed database.

-clbgoal {SHORT | LONG}

Connection Load Balancing Goal. Use a value of SHORT for this parameter for run-time load balancing, or if using an integrated connection pool. Use a value of LONG for this parameter for long running connections, such as batch jobs, that you want balanced by the number of sessions per node for the service.

-rlbgoal {NONE | SERVICE_TIME | THROUGHPUT}

Runtime Load Balancing Goal (for the Load Balancing Advisory). Set this parameter to SERVICE_TIME to balance connections by response time. Set this parameter to THROUGHPUT to balance connections by throughput.

-resetstate {NONE | LEVEL1}

Reset state in a session to clean values. If set to NONE, then session state is not cleaned. If set to LEVEL1, then session states that cannot be restored are reset.

The session state reset excludes global SYS CONTEXT and secure roles.

-failovertype {NONE | SESSION | SELECT | TRANSACTION | AUTO}

Set the failover type.

To enable Application Continuity for Java, set this parameter to TRANSACTION. To enable Transparent Application Continuity, set this parameter to AUTO.

To enable TAF for OCI, set this parameter to SELECT or SESSION.

Note: If you set -failovertype to TRANSACTION, then you must set -commit_outcome to TRUE.

-failovermethod {NONE | BASIC}

TAF failover method (for backward compatibility only).

If the failover type (-failovertype) is set to a value other than NONE, then you should choose BASIC for this parameter.

Note: This parameter can be used only with Oracle RAC.

-failoverretry failover_retries

For Application Continuity and TAF, this parameter determines the number of attempts to connect after an incident.

-failoverdelay failover_delay

For Application Continuity and TAF, this parameter specifies the time delay (in seconds) between reconnect attempts per incident at failover.

-failover_restore {NONE|LEVEL1|AUTO}

For Application Continuity, when you set the -failover_restore parameter, session states are restored before replaying. Use LEVEL1 for ODP.NET and Java with Application Continuity to restore the initial state.

Set this parameter to AUTO to enable Transparent Application Continuity to restore session states.

For OCI applications using TAF or Application Continuity, setting -failover_restore to LEVEL1 restores the current state. If the current state differs from the initial state, then a TAF callback is required. This restriction applies only to OCI.

-failback {YES | NO} If a service fails over to an available instance after the list of preferred instances was exhausted, then, if this parameter is set to YES, the service automatically fails back to a preferred instance when one becomes available.
-edition edition_name

The initial session edition of the service.

When an edition is specified for a service, all subsequent connections that specify the service use this edition as the initial session edition. However, if a session connection specifies a different edition, then the edition specified in the session connection is used for the initial session edition.

SRVCTL does not validate the specified edition name. During connection, the connect user must have USE privilege on the specified edition. If the edition does not exist or if the connect user does not have USE privilege on the specified edition, then an error is raised.

-pdb pluggable_database

The name of the pluggable database (PDB).

You can specify a PDB property when you create or modify a service. The PDB property associates the service with the specified PDB. You can view the PDB property for a service by querying the ALL_SERVICES data dictionary view or, when using the SRVCTL utility, by running the srvctl config service command.

Note: Starting with Oracle Database 21c, before using the -pdb option with the srvctl add service command, you must have previously added the PDB resource to Oracle Clusterware using the srvctl add pdb command.

-global {TRUE | FALSE}

Indicates whether this is a Global Data Services service.

Note: This parameter can only be used with Global Data Services.

-maxlag maximum_lag_time

Maximum replication lag time in seconds for a global service. Must be a non-negative integer. The default value is ANY. You must also specify the -global option.

-sql_translation_profile profile_name

Use this parameter to specify a SQL translation profile for a service that you are adding after you have migrated applications from a non-Oracle database to an Oracle database.

This parameter corresponds to the SQL translation profile parameter in the DBMS_SERVICE service attribute.

Notes:
  • Before using the SQL translation feature, you must migrate all server-side application objects and data to the Oracle database.
  • Use the srvctl config service command to display the SQL translation profile.
-commit_outcome {TRUE | FALSE}

Enable Transaction Guard; when set to TRUE, the commit outcome for a transaction is accessible after the transaction's session fails due to a recoverable outage.

-retention retention_time

If -commit_outcome is set to TRUE, then this parameter determines the amount of time (in seconds) that the commit outcome is retained in the database.

-replay_init_time replay_initialization_time

For Application Continuity, this parameter specifies the difference between the time, in seconds, of original execution of the first operation of a request and the time that the replay is ready to start after a successful reconnect. Application Continuity will not replay after the specified amount of time has passed. This parameter is intended to avoid the unintentional execution of a transaction when a system is recovered after a long period. The default is 5 minutes (300). The maximum value is 24 hours (86400). If the -failover_type parameter is not set to TRANSACTION, then you cannot use this parameter.

-session_state {STATIC | DYNAMIC | AUTO}

For Application Continuity; this parameter describes how the non-transactional session state is changed by the application within a request. Examples of session state are NLS settings, optimizer preferences, event settings, PL/SQL global variables, and temporary tables. For Transparent Application Continuity session_state is always set to AUTO. Session state is tracked automatically.

This parameter is considered only if -failovertype is set to TRANSACTION for Application Continuity or AUTO for Transparent Application Continuity.

  • If failover_type is set to TRANSACTION, then Oracle recommends a value of DYNAMIC for session_state.
  • If failover_type is set to AUTO, then session_state defaults to AUTO.
  • If failover_type is set to any value other than TRANSACTION or AUTO, then the value of session_state is not set.

If non-transactional values change after the request starts, then set this parameter to either DYNAMIC or AUTO. Most applications should use DYNAMIC or AUTO mode.

-pqservice pq_service

Specify a parallel query service name.

-pqpool pq_pool

Specify a parallel query server pool.

-gsmflags gsm_flags

Set locality and region failover values for a global service. You must also specify the -global option.

-tablefamilyid table_family_id

Set table family ID for a service. See "Shared Table Family" for more information.

-drain_timeout timeout

Specify the time, in seconds, allowed for resource draining to be completed. Accepted values are an empty string (""), 0, or any positive integer. The default value is an empty string, which means that this parameter is not set. If it is set to 0, then draining occurs, immediately.

The draining period is intended for planned maintenance operations. During the draining period, all current client requests are processed, but new requests are not accepted. When set on the service this value is used when the command line value is not set.

-stopoption {NONE|IMMEDIATE|TRANSACTIONAL}

Specify the default method of stopping the service. When set on the service, this value is used if you do not include the -stopoption parameter in other SRVCTL commands. If you do not set provide a value, then the default option NONE is used.

  • IMMEDIATE permits sessions to drain before the service is stopped. Sessions that do not drain are terminated when the time limit specified by -drain_timeout is reached.
  • If you specify TRANSACTIONAL, then sessions are terminated as soon as they commit. The service is stopped when the time limit specified by -drain_timeout is reached and any remaining sessions are terminated.
  • If you specify NONE, then no sessions are terminated.
-css_critical {yes | no}

You can add weight to a service by setting this parameter to YES. In the event of a node failure within the cluster, Oracle Clusterware will evict the node with the least amount of weight, ensuring that critical services remain available.

-rfpool pool_name

Specify the name of the reader farm server pool.

-update {-preferred new_preferred_instance | -available new_available_instance}

Add a new preferred or available instance to the service configuration. -preferred specifies the name of the instance to add to the list of preferred instances for the service. -available specifies the name of the instance to add to the list of available instances for the service.

-force

Force the add operation even though a listener is not configured for a network.

-eval

Use this parameter to hypothetically evaluate the impact of the command on the system.

-verbose

Display verbose output.

Usage Notes

This command does not accept placement parameters for Oracle RAC One Node databases.

Examples

Use this example syntax to add the gl.example.com service to the my_rac database with Fast Application Notification enabled for OCI connections, a failover method of BASIC, a Connection Load Balancing Goal of LONG, a failover type of SELECT, and 180 failover retries with a failover delay of 5 seconds:

$ srvctl add service -db my_rac -service gl.example.com -notification TRUE -failovermethod BASIC 
-failovertype SELECT -failoverretry 180 -failoverdelay 5 -clbgoal LONG

Use this example syntax to add a named service to a database with preferred instances and available instances and enabled for TAF:

$ srvctl add service -db crm -service sales -preferred crm01,crm02 -available crm03 -tafpolicy BASIC

Related Topics

srvctl config service

Displays the configuration for a service.

Syntax

srvctl config service {-db db_unique_name [-service service_name | -pdb pdb_name [-brief]] 
   | -serverpool serverpool_name [-db db_unique_name]} [-verbose]

Parameters

Table A-90 srvctl config service Command Parameters

Parameter Description
-db db_unique_name

Unique name for the database.

-service service_name

Optionally, you can specify the name of a service.

If you do not use this parameter, then SRVCTL displays the configuration information for all services configured for the database.

-pdb pdb_name Name of the PDB for which you want to show configured services.
-serverpool pool_name

Alternatively, you can use this parameter to specify the name of a server pool for which you want to view the service configuration. Optionally, you can also specify a particular database on which the server pool resides.

-verbose

Displays verbose output.

Usage Notes

The srvctl config service command shows exactly the string value you specified for the edition using the srvctl add | modify service commands. If you specified the edition in upper case, then srvctl config service displays upper case. If it is surrounded by double quotation marks (""), then the command displays the double quotation marks. Otherwise, the command displays an empty string.

Examples

This command returns information similar to the following for a policy-managed database:

$ srvctl config service -db crm -service webapps

Service name: webapps
Service is enabled
Server pool: sales
Cardinality: SINGLETON
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: NONE
Service is enabled on nodes:
Service is disabled on nodes:
Edition: "my Edition"

This command returns information similar to the following for a administrator-managed database:

$ srvctl config service -db crm -service webapps

Service name: webapps
Service is enabled
Server pool: sales
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: NONE
Preferred instances: crm_1
Available instances:
Edition: "my Edition"

Service configuration for administrator-managed Oracle RAC One Node databases displays the one instance as preferred.

srvctl disable service
Disables a service.

Disabling an entire service affects all of the instances, disabling each one. If the entire service is already disabled, then running this command on the entire service returns an error. This means that you cannot always use the entire set of service operations to manipulate the service indicators for each instance.

Syntax

srvctl disable service -db db_unique_name -services "service_name_list"
   [-instance instance_name | -node node_name]

Parameters

Table A-91 srvctl disable service Command Parameters

Parameter Description
-db db_unique_name

Specify a unique name for the database for which you want to disable the service.

-services "service_name_list"

Specify a comma-delimited list of service names enclosed in double quotation marks (""), or a single service name, that you want to disable.

-instance instance_name

Optionally, you can specify the name of the instance for which you want to disable the service.

Notes:

  • Use this parameter with administrator-managed databases.

  • You can only use this parameter with Oracle Clusterware and Oracle RAC.

-node node_name

Alternative to using the –instance parameter, you can use this parameter to specify the name of the node on which to disable the service.

Notes:

  • Use this parameter with policy-managed databases.

  • You can only use this parameter with Oracle Clusterware and Oracle RAC.

Examples

The following example globally disables two services for the CRM database:

$ srvctl disable service -db crm -service "crm,marketing"

The following example disables a service for the CRM database that is running on the CRM1 instance, resulting in the service still being available for the database, but on one less instance:

$ srvctl disable service -db crm -service crm -instance crm1
srvctl enable service
Enables a service for Oracle Clusterware.

Enabling an entire service also affects the enabling of the service over all of the instances by enabling the service on each one. If the entire service is already enabled, then running this command does not affect all of the instances and enable them but, instead, returns an error. Therefore, you cannot always use the entire set of service operations to manipulate the service indicators for each instance.

Syntax

srvctl enable service -db db_unique_name -service "service_name_list"
   [-instance instance_name | -node node_name]

Parameters

Table A-92 srvctl enable service Command Parameters

Parameter Description
-db db_unique_name

Specify a unique name for the database for which you want to enable the service.

-service "service_name_list"

Specify a single service name or a comma-delimited list of service names enclosed in double quotation marks ("") that you want to enable.

-instance instance_name

Optionally, you can use this parameter to specify the name of the database instance where you want the service to run.

Notes:
  • Use this parameter for administrator-managed databases.

  • You can only use this parameter with Oracle Clusterware and Oracle RAC.

-node node_name

Alternative to using the –instance parameter, you can use this parameter to specify the name of the node on which to enable the service.

Notes:

  • Use this parameter with policy-managed databases.

  • You can only use this parameter with Oracle Clusterware and Oracle RAC.

Examples

The following example globally enables a service:

$ srvctl enable service -db crm -service crm

The following example enables a service to use a preferred instance:

$srvctl enable service -db crm -service crm -instance crm1
srvctl modify service

Modifies a service configuration.

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

This command supports some online modifications to the service, such as:

  • Moving a service member from one instance to another

  • Performing online changes to service attributes from DBMS_SERVICE (for example, failover delay, runtime load balancing goal, and so on)

  • Adding a new preferred or available instance

  • Removing preferred or available instances for a service

Caution:

Oracle recommends that you limit configuration changes to the minimum requirement and that you not perform other service operations while the online service modification is in progress.

Syntax and Parameters

Use one of the following forms of the srvctl modify service command, depending on the task you want to perform, with the specified syntax:

To move a service from one instance to another:

srvctl modify service -db db_unique_name -service service_name 
      -oldinst old_instance_name -newinst new_instance_name [-force]

Note:

This form of the command is only available with Oracle Clusterware.

Table A-93 srvctl modify service Parameters for Moving a Service

Parameter Description
-db db_unique_name

Specify the unique name for the database.

-service service_name

Specify a service name. If you do not specify a service name, then SRVCTL moves all services.

-oldinst old_instance_name

Specify the name of the instance from which you want to move the service.

-newinst new_instance_name

Specify the name of the instance to which you want to move the service.

-force

Force the modify operation, stopping the service on some nodes, as necessary.

To change an available instance to a preferred instance for a service:

srvctl modify service -db db_unique_name -service service_name 
      -available avail_inst_name [-failback {YES|NO}] -toprefer [-force]

Note:

This form of the command is only available with Oracle Clusterware and does not accept placement parameters for Oracle RAC One Node databases. This command also does not move or otherwise disconnect the service but only modifies the service attributes.

Table A-94 srvctl modify service Parameters for Changing to a Preferred Instance

Parameter Description
-db db_unique_name

Specify the unique name for the database.

-service service_name

Specify the name of the service you want to modify.

-available available_inst_name

Specify the name of the available instance you want to change.

-failback {YES|NO} If a service fails over to an available instance after the list of preferred instances was exhausted, then, if this parameter is set to YES, then the service automatically fails back to a preferred instance when one becomes available.
-toprefer

Specify this parameter to change the instance status to preferred.

-force

Force the modify operation. For planned operations, the user experience is best if using an Oracle Connection Pool with FAN. The FAN planned event causes the Oracle pool to drain the requests with no interruption to the users.

To change the available and preferred status for multiple instances:

srvctl modify service -db db_unique_name -service service_name 
     -modifyconfig -preferred "preferred_list" [-available "available_list"]
     [-force]

Note:

This form of the command is only available with Oracle Clusterware and does not accept placement parameters for Oracle RAC One Node databases. This command also does not move or otherwise disconnect the service but only modifies the service attributes.

Table A-95 srvctl modify service Parameters for Changing Status of Multiple Instances

Parameter Description
-db db_unique_name

Specify the unique name for the database.

-service service_name

Specify the name of the service you want to modify.

-modifyconfig

This parameter directs SRVCTL to use only the instances named for this service (unnamed instances already assigned to the service are removed).

-preferred "preferred_instance_list"

Specify a comma-delimited list of preferred instances enclosed within double quotation marks ("").

-available "available_instance_list"

Specify a comma-delimited list of available instances enclosed within double quotation marks ("").

-force

Force the modify operation. For planned operations, the user experience is best if using an Oracle Connection Pool with FAN. The FAN planned event causes the connection pool to drain the requests with no interruption to the users.

To modify other service attributes or to modify a service for Oracle Clusterware:

srvctl modify service -db db_unique_name -service service_name 
 [-serverpool pool_name] [-pqservice pqsvc_name] [-pqpool pq_pool_list]
 [-cardinality {UNIFORM|SINGLETON|DUPLEX}] [-tafpolicy {BASIC|NONE}]
 [-role "[PRIMARY][,PHYSICAL_STANDBY][,LOGICAL_STANDBY][,SNAPSHOT_STANDBY]"]
 [-policy {AUTOMATIC|MANUAL}] [-notification {TRUE|FALSE}] [-dtp {TRUE|FALSE}]
 [-clbgoal {SHORT|LONG}] [-rlbgoal {NONE|SERVICE_TIME|THROUGHPUT}]
 [-resetstate {NONE|AUTO|LEVEL1}] [-failovertype {NONE|SESSION|SELECT|TRANSACTION|AUTO}]
 [-failoverretry failover_retries] [-failoverdelay failover_delay] 
 [-failover_restore [NONE|LEVEL1|AUTO]] [-failback {YES|NO}]
 [-edition edition_name] [-pdb pluggable_database] 
 [-sql_translation_profile profile_name] [-commit_outcome {TRUE|FALSE}]
 [-retention retention_time] [-replay_init_time replay_initiation_time] 
 [-session_state {STATIC|DYNAMIC|AUTO}] [-maxlag max_lag_time]
 [-gsmflags gsm_flags] [-tablefamilyid table_family_id]
 [-drain_timeout timeout] [-stopoption {NONE|IMMEDIATE|TRANSACTIONAL}] 
 [-global_override] [-css_critical {YES | NO}] [-rfpool <pool_name> -hubsvc <hub_service>]}
  [-eval] [-verbose] [-force]

Table A-96 srvctl modify service Parameters

Parameter Description
-db db_unique_name

The unique name for the database.

-service service_name

The name of the service you want to modify.

-serverpool pool_name

The name of a server pool used when the database is policy managed.

Note: This parameter can be used only with Oracle RAC and only for policy-managed databases.

-pqservice pqsvc_name

A comma-delimited list of parallel query service names.

-pqpool pq_pool_list

A comma-delimited list of parallel query server pool names.

-cardinality {UNIFORM|SINGLETON|DUPLEX}

The cardinality of the service, which can be one of the following:

  • UNIFORM – offered on all instances or PDBs in the database
  • SINGLETON – runs on only one instance or PDB at a time
  • DUPLEX – runs on two instances or PDBs at a time
Notes:
  • This parameter can be used only with Oracle RAC.
  • For policy-managed Oracle RAC One Node databases, all services must be SINGLETON.
-tafpolicy {BASIC|NONE}

Transparent Application Failover (TAF) policy specification (cannot be used with policy-managed databases).

-role "[PRIMARY][,PHYSICAL_STANDBY] [,LOGICAL_STANDBY][,SNAPSHOT_STANDBY]"

The database modes for which the service should be started automatically. You can specify one or more roles in a comma-delimited list.

Note: The -role parameter is only used at database startup and by the Oracle Data Guard Broker. All manual service startup must specify the name of the service to be started by the user.

-policy {AUTOMATIC|MANUAL}

The service management policy.

If AUTOMATIC (the default), then the service is automatically started upon restart of the database, either by a planned restart (with SRVCTL) or after a failure. Automatic restart is also subject to the service role, however (the -role parameter).

If MANUAL, then the service is never automatically restarted upon planned restart of the database (with SRVCTL). A MANUAL setting does not prevent Oracle Clusterware from monitoring the service when it is running and restarting it if a failure occurs.

-notification {TRUE|FALSE}

Use TRUE to enable Fast Application Notification (FAN) for Oracle Call Interface (OCI) connections.

-dtp {TRUE|FALSE}

Use TRUE to enable Distributed Transaction Processing for this service. This ensures that the service is offered at exactly one instance at a time for XA affinity.

Note: This parameter can be used only with Oracle RAC.

-clbgoal {SHORT|LONG}

Connection Load Balancing Goal. Set to SHORT if using runtime load balancing, or set to LONG for long running connections, such as batch jobs, that you want balanced by the number of sessions per node for the service.

-rlbgoal {NONE|SERVICE_TIME|THROUGHPUT}

Runtime Load Balancing Goal (for the Load Balancing Advisory). Set this parameter to SERVICE_TIME to balance connections by response time. Set this parameter to THROUGHPUT to balance connections by throughput.

-resetstate {NONE | LEVEL1}

Reset state in a session to clean values. If set to NONE, then session state is not cleaned. If set to LEVEL1, then session states that cannot be restored are reset.

-failovertype {NONE|SESSION|SELECT|TRANSACTION|AUTO}

Use this parameter to set the failover type.

To enable Application Continuity, set this parameter to TRANSACTION. To enable Transparent Application Continuity, set this parameter to AUTO.

To enable TAF, set this parameter to SELECT or SESSION.

-failoverretry failover_retries

For Application Continuity and TAF, specify the number of attempts to connect after an incident.

-failoverdelay failover_delay

For Application Continuity and TAF, specify the time delay (in seconds) between reconnect attempts per incident at failover.

-failover_restore [NONE|LEVEL1|AUTO]

For Application Continuity, when you set the -failover_restore parameter, session states are restored before replaying. Use LEVEL1 for ODP.NET and Java with Application Continuity to restore the initial state.

Set this parameter to AUTO to enable Transparent Application Continuity to restore session states.

For OCI applications using TAF or Application Continuity, setting -failover_restore to LEVEL1 restores the current state. If the current state differs from the initial state, then a TAF callback is required. This restriction applies only to OCI.

-failback {YES | NO} If a service fails over to an available instance after the list of preferred instances was exhausted, then, if this parameter is set to YES, the service automatically fails back to a preferred instance when one becomes available.
-edition edition_name

The initial session edition of the service.

When an edition is specified for a service, all subsequent connections that specify the service use this edition as the initial session edition. However, if a session connection specifies a different edition, then the edition specified in the session connection is used for the initial session edition.

SRVCTL does not validate the specified edition name. During connection, the connect user must have USE privilege on the specified edition. If the edition does not exist or if the connect user does not have USE privilege on the specified edition, then an error is raised.

-pdb pluggable_database

The name of a pluggable database (PDB).

Note: You can specify a PDB property when you create or modify a service. The PDB property associates the service with the specified PDB. You can view the PDB property for a service by querying the ALL_SERVICES data dictionary view or, when using the SRVCTL utility, by running the srvctl config service command.

When create or modify a service with the specified PDB, SRVCTL does not check if the PDB exists. Before running this command, you must ensure that the PDB exists.

-sql_translation_profile profile_name

Use this parameter to specify a SQL translation profile for a service that you are modifying after you have migrated applications from a non-Oracle database to an Oracle database.

If you want to set the SQL translation profile to a NULL value, then you must enter an empty string after the -p flag.

Note: Before using the SQL translation feature, you must migrate all server-side application objects and data to the Oracle database.

-commit_outcome {TRUE|FALSE}

Enable Transaction Guard; when set to TRUE, the commit outcome for a transaction is accessible after the transaction's session fails due to a recoverable outage.

-retention retention_time

For Transaction Guard (with the -commit_outcome parameter set to TRUE); this parameter determines the amount of time (in seconds) that the commit outcome is retained in the database.

-replay_init_time replay_initiation_time

For Application Continuity; this parameter specifies the time, in seconds, from when the original request started. Application Continuity will not replay after the specified amount of time has passed. This attribute avoids the unintentional replay of a request when a system is recovered after a long period. The default value is 300 (5 minutes).

-session_state {STATIC|DYNAMIC|AUTO}

For Application Continuity; this parameter describes how the non-transactional session state is changed by the application within a request. Examples of session state are NLS settings, optimizer preferences, event settings, PL/SQL global variables, and temporary tables. For Transparent Application Continuity session_state is always set to AUTO. Session state is tracked automatically.

This parameter is considered only if -failovertype is set to TRANSACTION for Application Continuity or AUTO for Transparent Application Continuity.

  • If failover_type is set to TRANSACTION, then Oracle recommends a value of DYNAMIC for session_state.
  • If failover_type is set to AUTO, then session_state defaults to AUTO.
  • If failover_type is set to any value other than TRANSACTION or AUTO, then the value of session_state is not set.

Oracle recommends a value of AUTO or DYNAMIC for most applications. If you are unsure which value to use, or if you can customize the application, then use DYNAMIC.

-maxlag maximum_lag_time

Maximum replication lag time in seconds for a global service. Must be a non-negative integer. The default value is ANY. You must also specify the -global option.

-gsmflags gsm_flags

Set locality and region failover values for a global service. You must also specify the -global option.

-tablefamilyid table_family_id

Set table family ID for a service. See Sharded Table Family for more information.

-drain_timeout timeout

Specify the time, in seconds, allowed for resource draining to be completed. Accepted values are an empty string (""), 0, or any positive integer. The default value is an empty string, which means that this parameter is not set. If it is set to 0, then draining occurs, immediately.

The draining period is intended for planned maintenance operations. During the draining period, all current client requests are processed, but new requests are not accepted. When set on the service this value is used when the command line value is not set.

-stopoption {NONE|IMMEDIATE|TRANSACTIONAL}

Specify the method of stopping the service. If this attribute was previously set for the service, then that value is used as the default value if you do not include the -stopoption parameter in your command. Otherwise, the default is NONE.

  • IMMEDIATE permits sessions to drain before the service is stopped. Sessions that do not drain are terminated when the time limit specified by -drain_timeout is reached.
  • If you specify TRANSACTIONAL, then sessions are terminated as soon as they commit. The service is stopped when the time limit specified by -drain_timeout is reached and any remaining sessions are terminated.
  • If you specify NONE, then no sessions are terminated.

Note: You must use the -stopoption parameter with the -force parameter.

-global_override

Override value to modify the global service attributes.

Use this parameter with the -role, -policy, -notification, -failovertype, -failovermethod, -failoverdelay, -failoverretry and -edition parameters.

-css_critical {yes | no}

You can add weight to a service by setting this parameter to YES. In the event of a node failure within the cluster, Oracle Clusterware will evict the node with the least amount of weight, ensuring that critical services remain available.

Note: You cannot use this parameter with policy-managed databases.

-rfpool pool_name

Specify the name of the reader farm server pool.

-eval

Use this parameter to hypothetically evaluate the impact of the command on the system.

Note: You can only use this parameter with a policy-managed service.

–verbose

Display verbose output.

-force

Force the modify operation, stopping the service on some nodes as necessary.

Usage Notes

  • When performing online changes to service attributes (for example, failover delay, Runtime Load Balancing Goal, and so on), the changes take effect only when the service is next (re)started.

  • When a service configuration is modified so that a new preferred or available instance is added, the running state of the existing service is not affected. However, the newly added instances will not automatically provide the service, until a srvctl start service command is issued.

  • When there are available instances for the service, and the service configuration is modified so that a preferred or available instance is removed, the running state of the service may change unpredictably:

    • The service is stopped and then removed on some instances according to the new service configuration.

    • The service may be running on some instances that are being removed from the service configuration.

    • These services will be relocated to the next free instance in the new service configuration.

Because of these considerations, when the online service is being modified, users may experience a brief service outage on some instances even if the instances are not being removed. Or users may experience a brief service outage on instances that are being removed from the service.

Examples

An example of moving a service member from one instance to another is:

$ srvctl modify service -db crm -service crm -oldinst crm1 -newinst crm2

An example of changing an available instance to a preferred instance is:

$ srvctl modify service -db crm -service crm -available crm1 -toprefer

The following command exchanges a preferred and available instance:

$ srvctl modify service -db crm -service crm -modifyconfig -preferred "crm1" \
-available "crm2"
srvctl predict service
Predicts the consequences of service failure.

Syntax

srvctl predict service -db db_unique_name -service service_name [-verbose]

Parameters

Table A-97 srvctl predict service Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name for the database on which the service operates that you want to check.

-service service_name

Specify a single service name or a comma-delimited list of service names enclosed in double quotation marks ("") that you want to check.

–verbose

Optionally, you can use this parameter to display detailed output.

srvctl relocate service

Temporarily relocates the specified service names from one specified instance to another specified instance.

This command works on only one source instance and one target instance at a time, relocating a service or all services from a single source instance to a single target instance.

Syntax

To relocate a service from one instance to another instance:

srvctl relocate service -db db_unique_name [-service service_name
  | -pdb pluggable_database] -oldinst old_inst_name [-newinst new_inst_name] 
  [-drain_timeout timeout] [-wait {YES | NO}] [-pq] [-force [-noreplay] 
  [-stopoption stop_option]] [-eval] [-verbose]

To relocate a service from one node to another node:

srvctl relocate service -db db_unique_name [-service service_name
  | -pdb pluggable_database] -currentnode source_node [-targetnode target_node]
  [-drain_timeout timeout] [-wait {YES | NO}] [-pq] [-force [-noreplay] 
  [-stopoption stop_option]] [-eval] [-verbose]

Parameters

Table A-98 srvctl relocate service Command Parameters

Parameter Description
-db db_unique_name

The unique name for the database on which the service currently runs.

-service service_name

The name of the service you want to relocate. If you do not specify any services, then all services that can be relocated, are relocated. Those that cannot be relocated remain in place.

-pdb pluggable_database

The name of the pluggable database in which the service you want to relocate is currently running.

-oldinst old_inst_name

The name of the instance from which you are relocating the service.

-newinst new_inst_name

The name of the instance to which you are relocating the service. This parameter is optional. If you do not specify an instance, then Oracle Clusterware chooses a new one.

Note: If you are using an administrator-managed database, then you must use the -oldinst and -newinst parameters and the target instance must be on the preferred or available list for the service.

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

-currentnode source_node

Name of the node where the service is currently running.

-targetnode target_node

Name of node where the service is to be relocated. If you do not specify a target node, then Oracle Clusterware chooses a new location.

Note: If you are using a policy-managed database, then you must use the -currentnode and -targetnode parameters.

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

-drain_timeout timeout

Specify the time, in seconds, allowed for resource draining to be completed. Accepted values are an empty string (""), 0, or any positive integer. The default value is an empty string, which means that this parameter is not set. If it is set to 0, then draining occurs, immediately.

The draining period is intended for planned maintenance operations. During the draining period, all current client requests are processed, but new requests are not accepted. When set on the service this value is used when the command line value is not set.

-wait YES | NO

Choose YES to wait until service draining is completed on the node from which you are relocating the service.

-stopoption option

Specify the method of stopping the service. If this attribute was previously set for the service, then that value is used as the default value if you do not include the -stopoption parameter in your command. Otherwise, the default is NONE.

  • IMMEDIATE permits sessions to drain before the service is stopped. Sessions that do not drain are terminated when the time limit specified by -drain_timeout is reached.
  • If you specify TRANSACTIONAL, then sessions are terminated as soon as they commit. The service is stopped when the time limit specified by -drain_timeout is reached and any remaining sessions are terminated.
  • If you specify NONE, then no sessions are terminated.

Note: You must use the -stopoption parameter with the -force parameter.

–pq

Performs the action on a parallel query service.

–force [-noreplay]

Disconnect all sessions during stop or relocate service operations.

Optionally, you can specify the -noreplay parameter if you do not want Application Continuity to replay in-flight transactions after a session is terminated during relocate service operations.

–eval

Use this parameter to hypothetically evaluate the impact of the command on the system.

–verbose

Verbose output.

Example

To temporarily relocate a named service member for the crm service from the database instance crm1 to the database instance crm3:

$ srvctl relocate service -db crm -service crm -oldinst crm1 -newinst crm3

Related Topics

srvctl remove service

Removes the service from Oracle Clusterware management.

Syntax

srvctl remove service -db db_unique_name {-service service_name |
   -pdb pdb_name}[-global_override] [-force]

Parameters

Table A-99 srvctl remove service Command Parameters

Parameter Description
-db db_unique_name

The unique name of the database or container database.

-service service_name

The name of the service you want to remove. You must specify either the service name or the pluggable database (PDB) name.

-pdb pdb_name

The name of the PDB that offers the service. You must specify either the service name or the PDB name.

-global_override

Indicates you are modifying global services. SRVCTL ignores this parameter for a non-global service.

-force

Ignore any dependencies when removing the service.

Usage Notes

If you use the -pdb option with this command, then SRVCTL removes all service resources for the specified PDB, but does not remove the PDB resource. If you specify the PDB service name using the -service option, then you do not have to also include the -pdb option because the PDB service name is unique within the container database (CDB).

Examples

This following example removes the sales service from all instances of the clustered database named crm:

$ srvctl remove service -db crm -service sales

The following example removes the services from the crmeast PDB:

$ srvctl remove service -db crm -pdb crmeast
srvctl start service

Starts a service or multiple services on a database, pluggable database, or instance.

Syntax

srvctl start service [-db db_unique_name] [-service "services_list"
  [-pq] | -pdb pluggable_database | -serverpool pool_name]
  [-node node_name | -instance instance_name]
  [-global_override] [-startoption start_options] [-eval] [-verbose]

Parameters

Parameter Description
-db db_unique_name

Specify a unique name for the database.

-service "service_list"

Specify a service name or a comma-delimited list of service names enclosed in double quotation marks ("").

If you do not include this parameter, then SRVCTL starts all of the services for the specified database.

Note: All manual service startup must specify the name of the service to be started by the user.

-pq

Specify this parameter to restrict the start action to a parallel query service.

-pdb pluggable_database

Specify the name of a pluggable database. Optionally, you can specify either the name of a node or the name of an instance to restrict the starting of services to that particular object on the pluggable database.

-serverpool pool_name

Alternative to using the -pq parameter, you can specify the name of a server pool that contains the services you want to start. Use this parameter for policy-managed databases.

-node node_name

Specify the name of a node where the services reside that you want to start. Use this parameter for policy-managed databases.

-instance instance_name

Specify the name of an instance where the services reside that you want to start. Use this parameter for administrator-managed databases.

-global_override

Override value to operate on a global service. Use this parameter only with global services; this parameter is ignored if specified for a non-global service.

-startoption start_options

Specify startup options used when service startup requires starting a database instance. Options include OPEN, MOUNT, and NOMOUNT.

Note: For multi-word startup options, such as read only and read write, separate the words with a space and enclose in double quotation marks (""). For example, "read only".

–verbose

Display verbose output.

Usage Notes

  • The srvctl start service command will fail if you attempt to start a service that is already running.

  • The srvctl start service command will fail if you attempt to start a service on an instance, if that service is already running on its maximum number of instances, that is, its number of preferred instances.

  • You can move a service or change the status of a service on an instance with the srvctl modify service and srvctl relocate service commands.

Examples

The following example starts all services on a specific database:

$ srvctl start database -db myDB

The following examples start a list of services (optionally restricted to a parallel query services in the latter example) regardless of the pluggable database on which they may reside:

$ srvctl start database -db myDB -service "myServ01,myServ02"
$ srvctl start database -db myDB -service "myServ01,myServ02" -pq

The following example starts all services in a given server pool:

$ srvctl start database -db myDB -serverpool myServerPool

The following examples start all services on a given pluggable database, optionally restricted to a single node or a single instance in the latter two examples, repectively:

$ srvctl start service -db myDB -pdb myPDB1
$ srvctl start service -db myDB -pdb myPDB1 -node myRACNode01
$ srvctl start service -db myDB -pdb myPDB1 -instance myDB01

The following example starts all services, for a given database, on a given instance (for all pluggable databases):

$ srvctl start service -db myDB -instance myDB01

The following example start all services for a given database on a given node (for all pluggable databases):

$ srvctl start service -db myDB -node myRACNode01

The following examples start a list of services on a given node or given instance:

$ srvctl start service -db myDB -service "myService01,myService02" -node myRACNode01
$ srvctl start service -db myDB -service "myService01,myService02" -instance myDB01
srvctl status service
Displays the status of a service.

For Oracle RAC One Node databases, if there is an online database relocation in process, then this command displays the source and destination nodes and the status of the relocation, whether it is active or failed.

Syntax

srvctl status service {-db db_unique_name [-service "service_name_list" | -pdb pdb_name] 
  | -serverpool serverpool_name [-db db_unique_name]} [-force] [-verbose]

Parameters

Optionally, you can use this parameter to include disabled applications.

Table A-100 srvctl status service Command Parameters

Parameter Description
-db db_unique_name

Specify the unique name of the database on which the service operates for which you want to check the status.

-pdb pdb_name Specify the name of the PDB on which the service operates for which you want to check the status.
-service "service_name_list"

Optionally, you can specify a comma-delimited list of service names for which you want to check status.

If you do not use this parameter, then SRVCTL lists the status of all services for the specified database.

–force

Optionally, you can use this parameter to include disabled applications.

–verbose

Optionally, you can use this parameter to display detailed output.

srvctl stop service

Stops one or more services globally across the cluster database, or on the specified instance.

Syntax

To stop services for a particular node in the cluster:

srvctl stop service -node node_name [-stopoption IMMEDIATE|TRANSACTIONAL|NONE] 
   [-drain_timeout timeout] [-wait {YES | NO}] [-force] [-noreplay]
   [-global_override] [-verbose]

To stop services for a database:

srvctl stop service -db db_unique_name [-pq] [-rf] [-pdb pluggable_database |
    -service "service_list" [-eval]] [-node node_name | -instance instance_name |
    -serverpool pool_name] [-stopoption IMMEDIATE|TRANSACTIONAL|NONE] 
   [-drain_timeout timeout] [-wait {YES | NO}] [-force [-noreplay] 
   [-global_override] [-verbose]

Parameters

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

Table A-101 srvctl stop service Command Parameters

Parameter Description
-node node_name

Optionally, you can specify the name of the node on which you want to stop services. Use this parameter without the –db parameter to stop all services on a specific node. If you use the –db parameter, then only the services on the specified node for that database are stopped.

-db db_unique_name

Specify a unique name for the database.

-pdb pluggable_database

Alternatively, use this parameter to stop services running on a specific pluggable database.

-service "service_list"

Specify a particular service or a comma-delimited list of service names enclosed in double quotation marks ("") you want to stop.

If you do not provide a service name list, then SRVCTL stops all services on the database or on a specific instance.

-pq

Specify this parameter to restrict the stop action to a parallel query service.

-instance instance_name

Optionally, you can specify the name of the instance for which you want to stop services.

-serverpool pool_name

Optionally, you can specify the name of the server pool that contains the service you want to stop.

—eval

Use this parameter to hypothetically evaluate the impact of the command on the system.

-stopoption IMMEDIATE|TRANSACTIONAL|NONE

Specify the method of stopping the service. If this attribute was previously set for the service, then that value is used as the default value if you do not include the -stopoption parameter in your command. Otherwise, the default is NONE.

  • IMMEDIATE permits sessions to drain before the service is stopped. Sessions that do not drain are terminated when the time limit specified by -drain_timeout is reached.
  • If you specify TRANSACTIONAL, then sessions are terminated as soon as they commit. The service is stopped when the time limit specified by -drain_timeout is reached and any remaining sessions are terminated.
  • If you specify NONE, then no sessions are terminated.

Note: You must use the -stopoption parameter with the -force parameter.

-drain_timeout timeout

Specify the time, in seconds, allowed for resource draining to be completed. Accepted values are an empty string (""), 0, or any positive integer. The default value is an empty string, which means that this parameter is not set. If it is set to 0, then draining occurs, immediately.

The draining period is intended for planned maintenance operations. During the draining period, all current client requests are processed, but new requests are not accepted. When set on the service this value is used when the command line value is not set.

-wait {YES | NO}

Choose YES to wait until service draining is completed on the node to stop the service.

-force [-noreplay]

Force SRVCTL to stop the service; this causes SRVCTL to disconnect all of the sessions using the stop option you specify (IMMEDIATE or TRANSACTIONAL), requiring the sessions using the service to reconnect and then connect to another instance.

Notes:

  • If you do not specify the -force parameter, then sessions already connected to this service stay connected, but new sessions cannot be established to the service.

  • Optionally, you can specify the -noreplay parameter if you do not want Application Continuity to replay in-flight transactions after a session is terminated.

    The -noreplay parameter is not limited to use with -force. However, if you do not want to replay in-flight transactions after you force the service to stop, then -force requires -noreplay.

-global_override

Override value to operate on a global service. SRVCTL ignores this parameter if the service is not a global service.

-verbose

Use this parameter to display verbose output.

Examples

The following example command stops services running on the crmeast PDB in the crm database using the IMMEDIATE method, allowing 60 seconds for services to transfer to another node:

$ srvctl stop service -db crm -pdb crmeast -drain_timeout 60 -force 
- stopoption immediate -verbose

The following example command stops all services running on the node node1 that are managed by Oracle Clusterware using the default stop option specified for each service and waiting until all sessions have drained from that node.

$ srvctl stop service -node node1 -wait yes

srvpool Commands

Use commands with the srvpool keyword to add, modify, list the configuration of, obtain the status of, and remove server pools.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.
srvctl add srvpool

Adds a server pool that is configured to host Oracle databases to a cluster.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

Syntax

srvctl add srvpool -serverpool server_pool_name [-min min_size] [-max max_size]
    [-importance importance] [-servers "node_list" | -category server_category] 
    [-force] [-eval] [-verbose]

Parameters

Table A-102 srvctl add srvpool Command Parameters

Parameter Description
-serverpool server_pool_name

The name of the server pool.

-min min_size

The minimum size of the server pool. The default value is 0.

-max max_size

The maximum size of the server pool. The default value is -1, which indicates that the size is unlimited.

-importance importance

A number signifying the importance of the server pool. The default value is 0.

-servers "node_list"

A comma-delimited list of candidate node names enclosed in double quotation marks (""). The server pool will only include nodes on the candidate list, but not all nodes on the candidate list will necessarily be in the server pool.

Note: Servers are assigned to server pools according to the value of the -category parameter.

-category server_category

The category of servers to use for the server pool, or "" for the empty category value. You can use hub for ora.hub.category or you can define your own category. The default is ora.hub.category.

-force

Add the server pool, even if it requires stopping resources in other server pools.

-eval

Use this parameter to hypothetically evaluate the impact of the command on the system.

-verbose

Display verbose output.

Usage Notes

  • SRVCTL prepends "ora." to the name of the server pool.

  • This command is only available with Oracle Clusterware.

Example

The following command adds a server pool named SP1, with importance set to 1, the minimum number of nodes in the server pool set to 3 and the maximum number of nodes in the server pool set to 7:

srvctl add srvpool -serverpool SP1 -importance 1 -min 3 -max 7
srvctl config srvpool

Displays configuration information including name, minimum size, maximum size, importance, and a list of server names, if applicable, for a specific server pool in a cluster.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

Syntax

srvctl config srvpool [-serverpool pool_name]

Parameters

The only parameter available for this command is -serverpool pool_name, which is the name of the server pool for which you want to display the configuration information.

Usage Notes

This command is only available with Oracle Clusterware.

Example

An example of this command is:

$ srvctl config srvpool -serverpool dbpool
srvctl modify srvpool

Modifies a server pool in a cluster.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

If minimum size, maximum size, and importance are numerically increased, then the CRS daemon may attempt to reassign servers to this server pool, if by resizing, other server pools have comparatively lower minimum size and importance, to satisfy new sizes of this server pool.

Syntax

srvctl modify srvpool -serverpool pool_name [-importance importance]
   [-min min_size] [-max max_size] [-servers "server_list"]
   [-category "server_category"] [-verbose] [-eval] [-force]

Parameters

Table A-103 srvctl modify srvpool Command Parameters

Parameter Description
-serverpool pool_name

Specify the name of the server pool you want to modify.

–eval

Optionally, you can use this parameter to hypothetically evaluate the impact of the command on the system.

-importance importance

Optionally, you can modify the importance of the server pool.

-min min_size

Optionally, you can modify the minimum size of the server pool. The default value is 0.

-max max_size

Optionally, you can modify the maximum size of the server pool. A value of -1 sets the server pool maximum size to UNLIMITED.

-servers "server_list"

Optionally, you can specify a comma-delimited list of candidate server names enclosed in double quotation marks ("").

Note: Servers are assigned to server pools according to the value of the -category parameter.

-category "server_category"

Optionally, you can modify the server category enclosed in double quotation marks ("") or "" for empty category value.

-verbose

Optionally, you can use this parameter to display detailed output.

–force

Optionally, you can use this parameter to force the operation even though SRVCTL may stop some resources.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example changes the importance rank to 0, the minimum size to 2, and the maximum size to 4 for the server pool srvpool1:

$ srvctl modify srvpool -serverpool srvpool1 -importance 0 -min 2 -max 4
srvctl remove srvpool

Removes a specific server pool.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

If there are databases or services that depend upon this server pool, then those resources are removed from the server pool first so that the remove server pool operation succeeds.

Syntax

srvctl remove srvpool -serverpool pool_name [-eval] [-verbose]

Parameters

Table A-104 srvctl remove srvpool Command Parameters

Parameter Description
-serverpool pool_name

Specify the name of the server pool you want to remove.

-eval

Optionally, you can use this parameter to evaluate the effects of removing a server pool without making any changes to the system.

–verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • If you successfully remove the specified server pool, then the CRS daemon may assign its servers to other server pools depending upon their minimum size, maximum size, and importance. The CRS daemon may also return these servers to its Free server pool.

Example

The following example removes a server pool from the system:

$ srvctl remove srvpool -serverpool srvpool1
srvctl status srvpool

Displays server pool names, number of servers in server pools, and, optionally, the names of the servers in the server pools.

Note:

Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.

Syntax

srvctl status srvpool [-serverpool pool_name] [-detail]

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Optionally, you can specify the name of a server pool for which you want to check the status. If you use this parameter, then the output includes the server pool name and number of servers in the server pool (and, optionally, the server names) for the specified server pool.

  • If you choose to use the -detail parameter but do not specify a specific server pool with the -serverpool parameter, then the output of this command includes the names of servers that are currently assigned to each server pool.

vip Commands

Use commands with the vip keyword to add, manage environment variables for, list the configuration of, enable, disable, start, stop, obtain the status of, and remove a VIP.

srvctl add vip

Adds a virtual IP address (VIP) to a node.

Syntax

srvctl add vip -node node_name -address {VIP_name|ip}/netmask[/if1[|if2|...]]
      -netnum network_number [-skip] [-verbose]

Parameters

Table A-105 srvctl add vip Command Parameters

Parameter Description
-node node_name

The name of the node on which you are adding the VIP.

-address {VIP_name|ip}/netmask [/if1[|if2|...]]

This specification creates a traditional VIP node application on the specified node.

You can specify one VIP_name or address, along with an IPv4 netmask or IPv6 prefix length.

-netnum network_number

The network number from which VIPs are obtained. The default network number is 1.

-skip

Specify this parameter to skip checking the reachability of the VIP address.

-verbose

Verbose output

Note:

Usage Notes

  • You cannot have multiple VIPs on the same net number (subnet or interface pair) on the same node.

  • This command is only available with Oracle Clusterware.

Example

An example of this command is:

# srvctl add network -netnum 2 -subnet 192.168.16.0/255.255.255.0
# srvctl add vip -node node7 -address 192.168.16.17/255.255.255.0 -netnum 2

The first command creates a network number, 2, and the second command adds a VIP to this network. You can specify the network number after the -netnum parameter in other SRVCTL commands.

srvctl config vip

Displays all VIPs on all networks in the cluster except for user VIPs.

Syntax

srvctl config vip {-node node_name | -vip vip_name}

Parameters

Table A-106 srvctl config vip Command Parameters

Parameter Description
-node node_name

Specify the node name.

-vip vip_name

Alternatively, you can specify the VIP name.

Usage Notes

This command is only available with Oracle Clusterware.

Example

This command returns output similar to the following:

$ srvctl config vip -node crmnode1

VIP exists: ipv4, ipv6, network number 1, hosting node adc2100252
srvctl disable vip
Disables a specific VIP.

Syntax

srvctl disable vip -vip vip_name [-verbose]

Usage Notes

  • This command is only available with Oracle Clusterware.

  • Specify the name of the VIP you want to disable.

  • Optionally, you can use the –verbose parameter to display detailed output.

Example

The following command disables a VIP:

$ srvctl disable vip -vip vip1 -verbose
srvctl enable vip
Enables a specific VIP.

Syntax

srvctl enable vip -vip vip_name [-verbose]

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • Specify the name of the VIP you want to enable.

  • Optionally, you can use the –verbose parameter to display detailed output.

Example

The following example enables a VIP named crm1-vip:

$ srvctl enable vip -vip crm1-vip -verbose
srvctl getenv vip
Obtains the values of environment variables for a specific VIP.

Syntax

srvctl getenv vip -vip vip_name [-envs "name_list"] [-verbose]

Parameters

Table A-107 srvctl getenv vip Command Parameters

Parameter Description
-vip vip_name

Specify the name of the VIP for which you want to obtain the values of the environment variables.

-envs "name_list"

Optionally, you can specify a comma-delimited list of the names of specific environment variables. If you do not use this parameter, then SRVCTL displays the values of all environment variables associated with the VIP.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example lists all environment variables for the specified VIP:

$ srvctl getenv vip -vip node1-vip
srvctl modify vip
Modifies IP address type but you can also use it to modify just the IP address.

Syntax

srvctl modify vip -node node_name -address {VIP_name|ip}/netmask[/if1[|if2|...]]
   [-netnum network_number] [-verbose]

Parameters

Table A-108 srvctl modify vip Command Parameters

Parameter Description
-node node_name

Specify the name of the node on which you are changing the VIP.

-address {VIP_name|ip}/netmask[/if1[|if2|...]]

Use this parameter to change the configuration of an existing VIP. If the VIP has an IPv4 address and the address you specify is IPv6, and the IP address type is set to both and the network type is set to static, then SRVCTL adds the IPv6 address to the existing IPv4 address of that resource.

You can specify one VIP_name or IP address, along with an IPv4 netmask or IPv6 prefix length.

-netnum network_number

Optionally, you can specify the network number from which VIPs are obtained. If you do not use this parameter, then SRVCTL obtains the VIPs from the same default network from which the nodeapps VIP is obtained.

–verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • You cannot have multiple VIPs on the same net number (subnet or interface pair) on the same node.

Example

The following example adds an IPv4 address to a VIP, if one does not already exist. If the VIP has an IPv4 address, then it is replaced with the new network specification.

# srvctl modify vip -node node7 -address 192.168.16.17/255.255.255.0 -netnum 2
srvctl predict vip
Predicts the consequences of VIP failure.

Syntax

srvctl predict vip [-vip vip_name] [-verbose]

Usage Notes

  • Optionally, you can specify the name of a VIP for which you want to evaluate the consequences of failure.

  • Optionally, you can use the –verbose parameter to display detailed output.

srvctl relocate vip
Relocates a specific VIP from its current hosting node to another node within the cluster.

Syntax

srvctl relocate vip -vip vip_name [-node node_name] [-force] [-verbose]

Parameters

Table A-109 srvctl relocate vip Command Parameters

Parameter Description
-vip vip_name

Specify the name of the VIP you want to relocate.

-node node_name

Optionally, you can specify the name of the target node where you want to relocate the VIP.

–force

Optionally, you can use this parameter to force the relocation of the VIP regardless of any dependencies.

–verbose

Optionally, you can use this parameter to display detailed output.

Example

The following example relocates a VIP to a different node in the cluster:

$ srvctl relocate vip -vip vip1 -node node3
srvctl remove vip
Removes specific VIPs.

Syntax

srvctl remove vip -vip "vip_name_list" [-force] [-noprompt] [-verbose]

Parameters

Table A-110 srvctl remove vip Command Parameters

Parameter Description
-vip "vip_name_list"

Specify a comma-delimited list of VIP names that you want to remove surrounded by double quotation marks ("").

–force

Optionally, you can use this parameter to remove a VIP regardless of any dependencies.

-noprompt

Optionally, you can use this parameter to suppress prompts.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example removes several VIPs from the system:

$ srvctl remove vip -vip "vip1,vip2,vip3" -force -noprompt -verbose
srvctl setenv vip
Administers cluster VIP environment configurations.

Syntax

srvctl setenv vip -vip vip_name {-envs "name=val[,...]" | -env "name=val"}
   [-verbose]

Parameters

Table A-111 srvctl setenv vip Command Parameters

Parameter Description
-vip vip_name

Specify the name of the VIP for which you want to set environment variables.

-envs "name=val[,...]"

Specify a comma-delimited list of name-value pairs of environment variables enclosed in double quotation marks ("") that you want to set.

-env "name=val"

Alternative to a list of environment variables, you can use this parameter to set a single environment variable to a value that contains commas or other special characters enclosed in double quotation marks ("").

–verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example sets the language environment configuration for a cluster VIP:

$ srvctl setenv vip -vip crm1-vip -env "LANG=en"
srvctl start vip
Starts a specific VIP or a VIP on a specific node.

Syntax

srvctl start vip {-node node_name | -vip vip_name} [-verbose]

Parameters

Table A-112 srvctl start vip Command Parameters

Parameter Description
-node node_name

Specify the name of the node on which the VIP resides that you want to start.

-vip vip_name

Alternative to specifying a node, you can specify a VIP that you want to start.

-verbose

Optionally, you can use this parameter to display detailed ouptut.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example starts a specific VIP:

$ srvctl start vip -vip crm1-vip -verbose
srvctl status vip
Displays status for a specific VIP or a VIP on a specific node.

Syntax

srvctl status vip {-node node_name | -vip vip_name} [-verbose]

Parameters

Table A-113 srvctl status vip Command Parameters

Parameter Description
-node node_name

Specify the name of the node on which the VIP resides that you want to check the status.

-vip vip_name

Alternative to specifying a node, you can specify a VIP that you want to check the status.

-verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

srvctl stop vip
Stops a specific VIP or all VIPs on a specific node, including any VIPs that were relocated due to a failover.

Syntax

srvctl stop vip {-node node_name | -vip vip_name} [-force] [-relocate] [-verbose]

Parameters

Table A-114 srvctl stop vip Command Parameters

Parameter Description
-node node_name

Specify the name of a node on which a VIP resides that you want to stop. If you use this parameter, then SRVCTL stops all VIPs on the specific node, including failed-over VIPs.

-vip vip_name

Alternative to specifying a node, you can specify a VIP that you want to stop.

-force

Optionally, you can use this parameter to stop the VIP regardless of any dependencies.

-relocate

Optionally, you can use this parameter to relocate the VIP.

Note: You must use the -node node_name parameter with the -relocate parameter.

–verbose

Optionally, you can use this parameter to display detailed output.

Usage Notes

You can only use this command with Oracle Clusterware.

Example

The following example stops all the VIPs on mynode1, including any failed-over VIPs:

$ srvctl stop vip -node mynode1 -verbose
srvctl unsetenv vip
Unsets the environment configuration for the specified cluster VIP.

Syntax

srvctl unsetenv vip -vip "vip_name_list" -envs "name_list" [-verbose]

Parameters

Table A-115 srvctl unsetenv vip Command Parameters

Parameter Description
-vip "vip_name_list"

Specify a comma-delimited list of VIP names enclosed in double quotation marks ("").

-envs "name_list"

Specify a comma-delimited list of environment variable names enclosed in double quotation marks ("") that you want to unset.

–verbose

Optionally, you can use this parameter to display detailed output.

Example

The following example unsets the CLASSPATH environment variable for a cluster VIP:

$ srvctl unsetenv vip -vip "crm2-vip" -envs "CLASSPATH"

volume Commands

Use commands with the volume keyword to list the configuration of, enable, disable, start, stop, obtain the status of, and remove an Oracle ACFS volume.

srvctl config volume

Displays the configuration for a specific volume or all volumes.

Syntax

srvctl config volume [-volume volume_name] [-diskgroup disk_group_name]
   [-device volume_device]

Parameters

Table A-116 srvctl config volume Command Parameters

Parameter Description
-volume volume_name

Specify the name of the volume for which you want to view the configuration.

-diskgroup disk_group_name

Specify the name of the disk group in which the volume resides for which you want to display the configuration.

-device volume_device

Specify the path to the volume device for which you want to display the configuration.

Usage Notes

  • If you do not specify any of the optional parameters, then SRVCTL displays the configuration information for all volumes.

  • If you specify only the -volume parameter, then SRVCTL displays the configuration for all volumes with that name, regardless of the diskgroup.

  • If you specify only the -diskgroup parameter, then SRVCTL displays the configuration information for the volumes that reside in the disk group that you specify.

  • If you specify only the -device parameter, then SRVCTL displays the configuration information for the volume matching that device specifier.

  • If you specify the -diskgroup and -device parameters, then SRVCTL displays the configuration information for the volume device that resides in the disk group that you specify.

  • This command is only available with Oracle Clusterware.

Examples

This command returns information similar to the following:

$ srvctl config volume -device /dev/asm/volume1-123

Diskgroup Name: DG1
Volume Name   : VOL1
Volume Device : /dev/asm/volume1-123
Volume is enabled.
Volume is enabled on nodes:
Volume is disabled on nodes:

If you do not specify any parameters, then SRVCTL returns configuration information for all volumes, similar to the following:

$ srvctl config volume

Diskgroup name: DG1
Volume name: VOL1
Volume device: /dev/asm/volume1-123
Volume is enabled.
Volume is enabled on nodes:
Volume is disabled on nodes:
Diskgroup name: DG1
Volume name: VOL2
Volume device: /dev/asm/volume2-456
Volume is enabled.
Volume is enabled on nodes:
Volume is disabled on nodes:
srvctl disable volume
Disables Oracle Clusterware management for a specific volume or all volumes.

This command allows a volume device to be stopped by operating on the Oracle Clusterware resource for the volume. This command does not stop volume device.

Syntax

srvctl disable volume {-volume volume_name -diskgroup disk_group_name |
    -device volume_device}

Parameters

Table A-117 srvctl disable volume Command Parameters

Parameter Description
-volume volume_name

Specify the name of the volume that you want to disable.

-diskgroup disk_group_name

Specify the name of the disk group in which the volume that you want to disable resides.

-device volume_device

Alternative to using the –diskgroup parameter, you can specify the path to the volume device that you want to disable.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • You must specify a particular volume that you want to disable. You can specify a volume that resides in either a particular disk group or on a particular volume device.

Example

The following example disables a volume named VOLUME1 that resides in a disk group named DATA:

$ srvctl disable volume -volume VOLUME1 -diskgroup DATA
srvctl enable volume
Enables Oracle Clusterware management for a specific volume or all volumes.

This command allows a volume device to be started by operating on the Oracle Clusterware resource for the volume. This command does not start the volume device, and is different from the SQL command ALTER DISKGROUP ENABLE VOLUME or the ASMCMD command volenable, because these two commands bring the volume device online, in a running state, making the volume device accessible.

Syntax

srvctl enable volume {-volume volume_name -diskgroup disk_group_name |
   -device volume_device}

Parameters

Table A-118 srvctl enable volume Command Parameters

Parameter Description
-volume volume_name

Specify the name of the volume that you want to enable.

-diskgroup disk_group_name

Specify the name of the disk group in which the volume that you want to enable resides.

-device volume_device

Alternative to using the –diskgroup parameter, you can specify the path to the volume device that you want to enable.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • You must specify a particular volume that you want to enable. You can specify a volume that resides in either a particular disk group or on a particular volume device.

Example

The following example enables a volume named VOLUME1 that resides in a disk group named DATA:

$ srvctl enable volume -volume VOLUME1 -diskgroup DATA
srvctl remove volume
Removes a specific volume.

Syntax

Use this command with one of the following syntax models:

srvctl remove volume -volume volume_name -diskgroup disk_group_name [-force]

srvctl remove volume -device volume_device [-force]

Parameters

Table A-119 srvctl remove volume Command Parameters

Parameter Description
-volume volume_name

Specify the name of the volume that you want to remove.

-diskgroup disk_group_name

Specify the name of the disk group in which the volume that you want to remove resides.

-device volume_device

Specify the path to the file system resource in which the volume that you want to remove resides.

–force

You can use this parameter to remove the volume even if it is running.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • The volume gets created when you create volumes in Oracle ASM.

  • You must specify a particular volume that you want to remove. You can specify a volume that resides in either a particular disk group or on a particular volume device.

Example

The following example removes a volume named VOLUME1 that resides in a disk group named DATA:

$ srvctl remove volume -volume VOLUME1 -diskgroup DATA
srvctl start volume
Starts a specific, enabled volume.

Syntax

srvctl start volume {-volume volume_name -diskgroup disk_group_name |
    -device volume_device} [-node node_list]

Parameters

Table A-120 srvctl start volume Command Parameters

Parameter Description
-volume volume_name

Specify the name of the volume that you want to start.

-diskgroup disk_group_name

Specify the name of the disk group in which the volume that you want to start resides.

-device volume_device

Alternative to using the –diskgroup parameter, you can specify the path to the volume device that you want to start.

-node node_list

Optionally, you can specify a comma-delimited list of node names enclosed in double quotation marks ("") where volumes that you want to start reside.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • The srvctl start volume command does not create a volume service. Provided that the volume already exists and the volume resource is enabled, SRVCTL attempts to start it. If the volume exists but the resource is disabled, then srvctl start volume returns an error.

Example

The following example starts a volume named VOLUME1 that resides in a disk group named DATA:

$ srvctl start volume -volume VOLUME1 -diskgroup DATA
srvctl status volume
Displays the status of a specific volume or all volumes.

Syntax

srvctl status volume [-device volume_device] [-volume volume_name] 
   [-diskgroup disk_group_name] [-node "node_list"]

Parameters

Table A-121 srvctl status volume Command Parameters

Parameter Description
-device volume_device

Optionally, you can specify the path to the volume device for which you want to display the status.

-volume volume_name

Optionally, you can specify the name of the volume for which you want to view the status.

-diskgroup disk_group_name

Optionally, you can specify the name of the disk group in which the volume resides for which you want to display the status.

-node "node_list"

Optionally, you can specify a comma-delimited list of node names enclosed in double quotation marks ("") where volumes for which you want to view the status reside.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • If you do not specify any of the optional parameters, then SRVCTL displays the status for all volumes.

  • If you specify only the -volume parameter, then SRVCTL displays the status for the volume that you specify.

  • If you specify only the -diskgroup parameter, then SRVCTL displays the status for the volumes that reside in the disk group that you specify.

  • If you specify only the -device parameter, then SRVCTL displays the status for the volume device that you specify.

  • If you specify the -diskgroup and -device parameters, then SRVCTL displays the status for the volume device in the disk group that you specify.

  • If you specify the -node parameter, then SRVCTL displays the status of the volumes that reside on the nodes you list.

Examples

This command displays information similar to the following:

$ srvctl status volume –volume vol1
Volume vol1 of diskgroup diskgrp1 for device volume_device_path1 is enabled
Volume vol1 of diskgroup diskgrp1 for device volume_device_path1 is running

In the preceding example, SRVCTL performs a status query on all nodes because the -node parameter is not specified.

$ srvctl status volume
Volume vol1 of diskgroup diskgrp for device volume_device_path1 is enabled
Volume vol1 of diskgroup diskgrp for device volume_device_path1 is running
Volume vol2 of diskgroup diskgrp for device volume_device_path2 is enabled
Volume vol2 of diskgroup diskgrp for device volume_device_path2 is running

In the preceding example, SRVCTL displays the status of all registered volumes because the no parameter is specified.

srvctl stop volume
Stops a specific, running volume.

Syntax

srvctl stop volume {-volume volume_name -diskgroup disk_group_name |
    -device volume_device} [-node "node_list"]

Parameters

Table A-122 srvctl stop volume Command Parameters

Parameter Description
-volume volume_name

Specify the name of the volume you want to stop.

-diskgroup disk_group_name

Specify the name of the disk group in which the volume you want to stop resides.

-device volume_device

Alternative to using the –diskgroup parameter, you can specify the path to the volume device that you want to stop.

-node "node_list"

Optionally, you can specify a comma-delimited list of node names enclosed in double quotation marks ("") where volumes that you want to stop reside.

Usage Notes

  • You can only use this command with Oracle Clusterware.

  • The srvctl stop volume command attempts to stop (disable) the volume but it does not disable the resource or remove the volume from Oracle ASM.

Example

The following example stops a volume named VOLUME1 that resides in a disk group named DATA:

$ srvctl stop volume -volume VOLUME1 -diskgroup DATA