15 Administering a CDB
Administering a multitenant container database (CDB) includes tasks such as accessing a container, modifying a CDB, executing DDL statements, and running Oracle-supplied SQL scripts.
Note:
You can complete the tasks in this chapter using SQL*Plus or Oracle SQL Developer.See Also:
About CDB Administration
Some administrative tasks apply to the entire CDB, whereas others apply to specific containers.
About the Current Container
The data dictionary in each container in a CDB is separate, and the current container is the container whose data dictionary is used for name resolution and for privilege authorization.
The current container can be the CDB root, an application root, a PDB, or an application PDB. Each session has exactly one current container at any point in time. However, a session can switch from one container to another.
Each container has a unique ID and name in a CDB. You can use the CON_ID
and CON_NAME
parameters in the USERENV
namespace to determine the current container ID and name with the SYS_CONTEXT
function. For example, the following query returns the current container name:
SELECT SYS_CONTEXT ('USERENV', 'CON_NAME') FROM DUAL;
You can access a container in various ways. For example, you can use the SQL*Plus CONNECT
command, and you can use an ALTER SESSION SET CONTAINER
statement to switch the container of the current session.
The following rules apply to the current container in a CDB:
-
The current container can be
CDB$ROOT
(CDB root) only for common users. -
The current container can be a specific PDB for common users and local users.
-
The current container can be an application root only for common users or for application common users created in the application root.
-
The current container can be a specific application PDB for common users, application common users, and local users.
-
The current container must be the CDB root or an application root when a SQL statement includes
CONTAINER = ALL
.You can include the
CONTAINER
clause in several SQL statements, such as theCREATE USER
,ALTER USER
,CREATE ROLE
,GRANT
,REVOKE
, andALTER SYSTEM
statements. Note the following rules aboutCONTAINER = ALL
:-
When a SQL statement includes
CONTAINER = ALL
and the current container is the CDB root, the SQL statement affects all containers in the CDB, including all PDBs, application roots, and application PDBs. -
When a SQL statement includes
CONTAINER = ALL
and the current container is an application root, the SQL statement affects all containers in the application container, including the application root and all the application PDBs that belong to the application root. The SQL statement does not affect the CDB root or any PDBs or application PDBs that do not belong to the current application root. -
Only a common user or application common user with the commonly granted
SET CONTAINER
privilege can run a SQL statement that includesCONTAINER = ALL
.
-
About Administrative Tasks in a CDB
Common users perform administrative tasks for a CDB.
A common user has a single identity and can log in to the CDB root, any application root, PDB, or application PDB in which it has privileges. Some tasks, such as starting up a CDB instance, can be performed only by a common user.
Note:
A multitenant container database is the only supported architecture in Oracle Database 21c. While the documentation is being revised, legacy terminology may persist. In most cases, "database" and "non-CDB" refer to a CDB or PDB, depending on context. In some contexts, such as upgrades, "non-CDB" refers to a non-CDB from a previous release.
The following table describes some CDB administrative tasks and provides pointers to the relevant documentation.
Table 15-1 Administrative Tasks for CDBs
Task | Description | Additional Information |
---|---|---|
Starting up a CDB instance |
To start a CDB instance, the current user must be a common user whose current container is the CDB root. When you open a CDB, the CDB root is opened, but its other containers are mounted. Use the |
"Starting Up and Shutting Down a CDB" for information about starting up a database "Modifying the Open Mode of PDBs" "Modifying a PDB with the ALTER PLUGGABLE DATABASE Statement" |
Managing processes |
A CDB has one set of background processes shared by the CDB root and all containers. |
Oracle Database Administrator’s Guide for information about managing processes |
Managing memory |
A CDB has a single system global area (SGA) and a single aggregate program global area (PGA). The memory required by a CDB is the sum of the memory requirements for all containers that will be part of the CDB. |
Oracle Database Administrator’s Guide for information about managing memory |
Managing security |
You can create and drop common users, application common users, and local users in a CDB. You can also grant privileges to and revoke privileges from these users. You can also manage the In addition, grant the following roles to the appropriate users:
|
|
Monitoring errors and alerts |
A CDB has one alert log for the entire CDB. The name of an application container, PDB, or application PDB is included in records in trace files, when appropriate. |
Oracle Database Administrator’s Guide for information about monitoring errors and alerts |
Managing diagnostic data |
In a CDB, you can use the Oracle Database fault diagnosability infrastructure and the Automatic Diagnostic Repository (ADR). |
Oracle Database Administrator’s Guide for information about managing diagnostic data |
Managing control files |
A CDB has one control file. |
Oracle Database Administrator’s Guide for information about managing control files |
Managing the online redo log and the archived redo log files |
A CDB has one online redo log and one set of archived redo log files. |
Oracle Database Administrator’s Guide for information about managing the redo log Oracle Database Administrator’s Guide for information about managing archived redo log files |
Managing tablespaces |
You can create, modify, and drop tablespaces and temporary tablespaces for the CDB root and for individual containers. You can also specify a default tablespace, default tablespace type, and a default temporary tablespace for the CDB root. The CDB root has its own set of Oracle-supplied tablespaces, such as the |
Oracle Database Administrator’s Guide for information about managing tablespaces |
Managing data files and temp files |
The CDB root has its own data files, and other containers have their own data files. Note the following:
|
Oracle Database Administrator’s Guide for information about managing data files and temp files |
Managing undo |
A CDB can run in local undo mode or shared undo mode. Local undo mode means that every container in the CDB uses local undo. Shared undo mode means that there is one active undo tablespace for a single-instance CDB, or for an Oracle RAC CDB, there is one active undo tablespace for each instance. In a CDB, the |
"Setting the Undo Mode in a CDB Using ALTER DATABASE" Oracle Database Administrator’s Guide for information about managing undo |
Moving data between containers |
You can move data between containers within a CDB using the same methods that you would use to move data between CDBs. For example, you can transport the data or use Data Pump export/import to move the data. |
Oracle Database Administrator’s Guide for information about transporting data |
Using Oracle Managed Files |
Using Oracle Managed files can simplify administration for a CDB. |
Oracle Database Administrator’s Guide for information about using Oracle Managed Files |
Using Transparent Data Encryption |
Transparent Data Encryption is a feature that enables encryption of individual table columns before storing them in the data file, or enables encryption of entire tablespaces. In a CDB, each container has its own master key for Transparent Data Encryption, and, where applicable, the |
|
Using a standby database |
Oracle Data Guard can configure a physical standby or a logical standby of a CDB. Data Guard operates on the entire CDB, not on individual containers in a CDB. |
|
Using Oracle Database Vault |
Oracle Database Vault common realms can be scoped to an application root on common objects. Database Vault common command rules can be scoped to either the CDB or an application root. Local realms and command rules can be locally scoped to individual PDBs or application PDBs. When Oracle Database Vault security objects are in the CDB root or an application root, enforcement of the security objects only applies to the containers that have Oracle Database Vault enabled. |
|
Dropping a database |
When you drop a CDB, all containers in the CDB are dropped along with their data. These containers include the CDB root and PDB seed and all application containers, application seeds, PDBs, and application PDBs. You can also drop individual application containers, application seeds, PDBs, and application PDBs with the |
Oracle Database Administrator’s Guide for information about dropping a database |
See Also:
Oracle Database Concepts for more information about the architecture of a CDB
About Using Manageability Features in a CDB
For each of Oracle Database's manageability features in a CDB, it is important to understand the data location and the data visibility.
When feature data resides in the CDB root, the data is not included when a PDB is unplugged. When the data resides in a PDB, however, the data remains both when the PDB is unplugged and when it is plugged in.
Generally, in a CDB, a common user can view data for the CDB root and for multiple PDBs when the common user's current container is the CDB root. A common user can view this data by querying container data objects. The specific data that is visible varies for the manageability features. A user whose current container is a PDB can view data for that PDB only.
The following table describes how the manageability features work in a CDB.
Table 15-2 Manageability Features in a CDB
Manageability Feature | Data Location | Data Visibility | Additional Information |
---|---|---|---|
Active Session History (ASH) ASH collects information about active database sessions. You can use this information to analyze and identify performance issues. |
Most of the ASH data is stored in memory. A small percentage of the ASH data samples are stored in the CDB root. ASH data related to a PDB is not included if the PDB is unplugged. |
A common user whose current container is the CDB root can view ASH data for the CDB root and for PDBs. A user whose current container is a PDB can view ASH data for the PDB only. |
|
Alerts An alert is a notification of a possible problem. |
Threshold settings that pertain to a PDB are stored in the PDB. Alerts posted when thresholds are violated are enqueued into the alert queue in the CDB root. Threshold settings that pertain to a PDB are included if the PDB is unplugged. Alerts related to a PDB are not included if the PDB is unplugged. |
A common user whose current container is the CDB root can view alerts for the CDB root and for PDBs. A user whose current container is a PDB can view alert thresholds and alerts for the PDB only. |
Oracle Database Administrator’s Guide for information about monitoring errors and alerts |
Automated Database Maintenance Tasks Automated database maintenance tasks are tasks that are started automatically at regular intervals to perform maintenance operations on the database. Automated tasks include automatic optimizer statistics collection, Automatic Segment Advisor tasks, and Automatic SQL Tuning Advisor tasks. The The |
A user can schedule maintenance windows and enable or disable maintenance tasks for the current container only. If the current container is the CDB root, then the changes only apply to the CDB root. If the current container is a PDB, then the changes only apply to the PDB. Data related to a PDB is stored in the PDB for automatic optimizer statistics collection and the Automatic Segment Advisor. This data is included if the PDB is unplugged. Automatic SQL Tuning Advisor runs only in the CDB root. See the SQL Tuning Advisor row in this table for information about data collected by Automatic SQL Tuning Advisor. |
See the appropriate row in this table for data visibility information about the following manageability features: automatic optimizer statistics collection, Optimizer Statistics Advisor, Automatic Segment Advisor, and Automatic SQL Tuning Advisor. |
Oracle Database Administrator’s Guide for information about managing automated database maintenance tasks Oracle Database Reference for information about the Oracle Database Reference for information about the |
Automatic Database Diagnostic Monitor (ADDM) ADDM can diagnose the performance of a CDB or PDB and determine how identified problems can be resolved. |
ADDM executions occur in a PDB or in the CDB root. ADDM analyzes data using one of the following sources:
Before the start of the analysis, ADDM determines the source of the AWR data (PDB or CDB root) and applies the rules applicable to each data type. Note: Automatic ADDM for a PDB is enabled only when automatic snapshots are enabled for the PDB. |
A common user whose current container is the CDB root can review results for the entire CDB. The ADDM results can include information about multiple PDBs. ADDM results related to a PDB are not included if the PDB is unplugged. The ADDM results cannot be viewed when the current container is a PDB. A user whose current container is a PDB can view ADDM results data for the current PDB only. The results exclude findings that apply to the CDB as a whole, for example, I/O problems relating to the buffer cache size. |
|
Automatic Optimizer Statistics Collection Automatic optimizer statistics collection gathers optimizer statistics for all schema objects in the database for which there are no statistics or only stale statistics. The statistics gathered by this task are used by the SQL query optimizer to improve the performance of SQL execution. |
When an automatic optimizer statistics collection task gathers data for a PDB, it stores this data in the PDB. This data is included if the PDB is unplugged. |
A common user whose current container is the CDB root can view optimizer statistics data for PDBs. A user whose current container is a PDB can view optimizer statistics data for the PDB only. |
|
Automatic Segment Advisor The Automatic Segment Advisor identifies segments that have space available for reclamation and makes recommendations on how to defragment those segments. |
When Automatic Segment Advisor gathers data for a PDB, it stores this data in the PDB. This data is included if the PDB is unplugged. |
A common user whose current container is the CDB root can view Automatic Segment Advisor data for PDBs. A user whose current container is a PDB can view the Automatic Segment Advisor data for the PDB only. |
Oracle Database Administrator’s Guide for information about reclaiming unused space |
Automatic Workload Repository (AWR) The AWR collects, processes, and maintains performance statistics for problem detection and self-tuning purposes. This data is stored in the database. The gathered data can be displayed in both reports and views. |
AWR reports can be generated in the CDB root or in any PDB. AWR reports generated in the CDB root pertain to the entire CDB, while AWR reports generated when a PDB is the current container only pertain to that PDB. AWR data generated in the CDB root is stored in the CDB root. AWR data generated in a PDB is stored in the PDB. When a PDB is unplugged, AWR data stored in the CDB root is not included. When a PDB is unplugged, AWR data stored in the PDB is included. |
A common user whose current container is the CDB root can view AWR data for the CDB root and for PDBs. A user whose current container is a PDB can view AWR data for the PDB only. |
|
Database Replay Database Replay is a feature of Oracle Real Application Testing. Database Replay captures the workload for a CDB or PDB and replays it exactly on a test database. |
Capture files are always stored in operating system files, regardless of whether the capture and replay is at the CDB level or PDB level. |
For CDB-level workloads, a common user whose current container is the CDB root can view database capture and replay information. For PDB-level workloads, a local or common PDB administrator with the |
|
Optimizer Statistics Advisor Optimizer Statistics Advisor analyzes how statistics are being gathered and suggests changes that can be made to fine tune statistics collection. |
Data related to a PDB is stored in the PDB for Optimizer Statistics Advisor. This data is included if the PDB is unplugged. |
A common user whose current container is the CDB root can view Optimizer Statistics Advisor data for PDBs. A user whose current container is a PDB can view the Optimizer Statistics Advisor data for the PDB only. |
|
SQL Management Base (SMB) SMB stores statement logs, plan histories, SQL plan baselines, and SQL profiles in the data dictionary. |
SMB data related to a PDB is stored in the PDB. The SMB data related to a PDB is included if the PDB is unplugged. |
A common user whose current container is the CDB root can view SMB data for PDBs. A user whose current container is a PDB can view the SMB data for the PDB only. |
|
SQL Performance Analyzer (SPA) SPA can analyze the SQL performance impact of SQL tuning and other system changes. SPA is often used with Database Replay. |
A common user whose current container is the CDB root can run SPA for any PDB. In this case, the SPA results data is stored in the CDB root and is not included if the PDB is unplugged. A user whose current container is a PDB can run SPA on the PDB. In this case, the SPA results data is stored in the PDB and is included if the PDB is unplugged. |
A common user whose current container is the CDB root can view SPA results data for PDBs. A user whose current container is a PDB can view the SPA results data for the PDB only. |
|
SQL Tuning Sets (STS) An STS is a database object that includes one or more SQL statements along with their execution statistics and execution context, and could include a user priority ranking. You can use an STS to tune a group of SQL statements or test their performance using SPA. |
An STS can be stored in the CDB root or in any PDB. If it is stored in the CDB root, then you can load SQL statements from any PDB into it. When a PDB is unplugged, an STS stored in the CDB root is not included, even if the STS contains SQL statements from the PDB. When a PDB is unplugged, an STS stored in the PDB is included. |
A common user whose current container is the CDB root can view STS data stored in the CDB root only. A user whose current container is a PDB can view STS data for the PDB only. |
|
SQL Tuning Advisor SQL Tuning Advisor optimizes SQL statements that have been identified as high-load SQL statements. |
Automatic SQL Tuning Advisor data is stored in the CDB root. It might have results about SQL statements executed in a PDB that were analyzed by the advisor, but these results are not included if the PDB is unplugged. A common user whose current container is the CDB root can run SQL Tuning Advisor manually for SQL statements from any PDB. When a statement is tuned, it is tuned in any container that runs the statement. A user whose current container is a PDB can also run SQL Tuning Advisor manually for SQL statements from the PDB. When SQL Tuning Advisor is run manually from a PDB, the results are stored in the PDB from which it is run. In this case, a statement is tuned only for the current PDB, and the results related to a PDB are included if the PDB is unplugged. |
When SQL Tuning Advisor is run automatically, the results are visible only to a common user whose current container is the CDB root. These results cannot be viewed when the current container is a PDB. When SQL Tuning Advisor is run manually by a user whose current container is a PDB, the results are only visible to a user whose current container is that PDB. |
To run SPA or SQL Tuning Advisor for SQL statements from a PDB, a common user must have the following privileges:
-
Common
SET CONTAINER
privilege or localSET CONTAINER
privilege in the PDB -
The privileges required to execute the SQL statements in the PDB
See Also:
-
"About CDB and Container Information in Views" for an overview of container data objects
-
Oracle Database Security Guide for detailed information about container data objects
About Managing Tablespaces in a CDB
A tablespace is a logical storage container for database objects, such as tables and indexes, that consume storage space.
At the physical level, a tablespace stores data in one or more data files or temp files. You can use the ALTER DATABASE
statement to manage tablespaces in a CDB.
The following are considerations for tablespaces in a CDB:
-
A permanent tablespace can be associated with exactly one container.
-
When you create a tablespace in a container, the tablespace is associated with that container.
-
When local undo is disabled for a CDB, the CDB has only one active undo tablespace, or one active undo tablespace for each instance of an Oracle RAC CDB. When local undo is enabled for a CDB, each container in the CDB has its own undo tablespace.
-
A local undo tablespace is required for each node in an Oracle Real Application Clusters (Oracle RAC) cluster in which the PDB is open.
-
There is one default temporary tablespace each container in the CDB, including the CDB root, each PDB, each application root, and each application PDB.
About Managing Permanent Tablespaces in a CDB
A permanent tablespace can be associated with only one container. Therefore, a permanent tablespace can be associated with the root or with one PDB.
Each container in a CDB must have its own default permanent tablespace, and default permanent tablespaces cannot be shared between containers. Users connected to the container who are not explicitly assigned a tablespace use the default permanent tablespace for the container.
About Managing Temporary Tablespaces in a CDB
Each container in a CDB has its own default temporary tablespace (or tablespace group).
You also can create additional temporary tablespaces for individual containers, and you can assign specific users in containers to these temporary tablespaces. When you unplug a PDB, its temporary tablespaces are also unplugged.
When a user is not assigned a temporary tablespace explicitly in a container, the user’s temporary tablespace is the default temporary tablespace for the container.
See Also:
-
Oracle Database Administrator’s Guide for information about managing tablespaces
About Managing Database Objects in a CDB
In a CDB, different containers can contain different database objects.
An Oracle database stores database objects, such as tables, indexes, and directories. Database objects that are owned by a schema are called schema objects, while database objects that are not owned by a schema are called nonschema objects. The CDB root and PDBs contain schemas, and schemas contain schema objects. The CDB root and PDBs can also contain nonschema objects, such as users, roles, tablespaces, directories, and editions.
The CDB root contains Oracle-supplied schemas and database objects. Oracle-supplied common users, such as SYS
and SYSTEM
, own these schemas and common database objects. They can also own local objects, both in the CDB root and in a PDB.
You can create common user accounts in the CDB root to administer PDBs and application containers. User-created common user accounts can create database objects in the CDB root. Oracle recommends that, in the CDB root, schemas owned by user-created common user accounts contain only database triggers and the objects used in their definitions. A user-created common user account can also own any type of local object in a PDB.
You can create local user accounts in a PDB. A local user in a PDB can create schema objects and nonschema objects in the PDB. You cannot create local user accounts in the CDB root.
In a CDB, names are resolved in the context of the dictionary of the user's current container.
See Also:
-
Oracle Database Administrator’s Guide for information about managing schema objects
-
Oracle Database SQL Language Reference for information about schema objects and nonschema objects
-
Oracle Database Security Guide for information about creating common users and local users
About Flashing Back a PDB
You can use the FLASHBACK PLUGGABLE DATABASE
statement to return a PDB to a past time or system change number (SCN).
You can create restore points for a PDB and flash back the PDB to the restore point without affecting the CDB or other PDBs.
About Restricting PDB Users for Enhanced Security
There are several ways to restrict PDB users for enhanced security.
A PDB lockdown profile restricts the features and options available to users in a PDB. The PDB_OS_CREDENTIAL
initialization parameter can specify a unique operating system user for a PDB to limit operating system access. Also, when the PATH_PREFIX
and CREATE_FILE_DEST
clauses are specified during PDB creation, they limit file system access.
PDB Lockdown Profiles
When identities are shared between PDBs, elevated privileges might exist. You can use lockdown profiles to prevent this elevation of privileges.
Identities can be shared in the following situations:
-
At the operating system level, when the database interacts with operating system resources such as files or processes
-
At the network level, when the database communicates with other systems
-
Inside the database, as PDBs access or create common objects or communicate across container boundaries using features such as database links
To increase security, a CDB administrator can use PDB lockdown profiles to restrict users in particular PDBs. A PDB lockdown profile can disable users from running specified SQL statements, such as ALTER SYSTEM
statements, or disable access to a package that can access the network, such as UTL_SMTP
. A PDB lockdown profile can also restrict access to common users, common objects, administrative tools such as Oracle XML DB, administrative features such as cursor sharing, and database options such as Oracle Database Advanced Queuing. PDB lockdown profiles can prohibit the use of the XDB protocols (FTP, HTTP, HTTPS) by a PDB with the XDB_PROTOCOLS
feature.
When logged in to the CDB root or application root, create a lockdown profile by issuing the CREATE LOCKDOWN PROFILE
statement, which supports the following optional clauses:
-
FROM static_base_profile
creates a new lockdown profile by using the values from an existing profile. Any subsequent changes to the existing profile will not affect the new profile. -
INCLUDING dynamic_base_profile
creates a new lockdown profile by using the values from an existing profile, except that this new lockdown profile inherits theDISABLE STATEMENT
rules that comprise the base profile, and any subsequent changes to the base profile.
The user issuing the statement must have the CREATE LOCKDOWN PROFILE
system privilege in the current container. You can add and remove restrictions with the ALTER LOCKDOWN PROFILE
statement. The user must issue the ALTER
statement in the CDB root or application root and must have the have ALTER LOCKDOWN PROFILE
system privilege in the current container.
Specify a lockdown profile by using the PDB_LOCKDOWN
initialization parameter. This parameter determines whether the PDB lockdown profile applies to a given PDB. You can set this parameter at the following levels:
-
PDB
The profile applies only to the PDB in which it is set.
-
Application container
The profile applies to all application PDBs in the application container. The value can be modified only by an application common user who has application common
SYSDBA
or commonALTER SYSTEM
privileges or a CDB common user who has commonSYSDBA
or commonALTER SYSTEM
privileges. -
CDB
The profile applies to all PDBs. A common user who has common
SYSDBA
or commonALTER SYSTEM
privileges can override a CDB-wide setting for a specific PDB.
If the PDB_LOCKDOWN
parameter in a PDB is set to the name of a lockdown profile different from the container for this PDB (CDB or application container), then a set of rules govern the interaction between restrictions.
See Also:
-
Oracle Database Security Guide for complete information about lockdown profiles
-
Oracle Database SQL Language Reference for more information about the
CREATE LOCKDOWN PROFILE
statement -
Oracle Database Reference for more information about the
PDB_LOCKDOWN
initialization parameter
PDB_OS_CREDENTIAL Initialization Parameter
When the database accesses an external procedure with the extproc
agent, the PDB_OS_CREDENTIAL
initialization parameter determines the identity of the operating system user employed when interacting with the operating system from a PDB.
Using an operating system user described by a credential whose name is specified as a value of the PDB_OS_CREDENTIAL
initialization parameter can ensure that operating system interactions are performed as a less powerful user. In this way, the feature protects data belonging to one PDB from being accessed by users connected to another PDB. A credential is an object that is created using the CREATE_CREDENTIAL
procedure in the DBMS_CREDENTIAL
package.
The Oracle operating system user is usually a highly privileged user. Using this account for operating system interactions is not recommended. Also, using the same OS user for operating system interactions from different PDBs might compromise data belonging to a given PDB.
Accessing Containers in a CDB
You can connect to a container by using the SQL*Plus CONNECT
command. Alternatively, you can switch into a container with an ALTER SESSION SET CONTAINER
SQL statement.
About Container Access in a CDB
You can use SQL*Plus to access the root or a PDB in a CDB.
See Also:
-
Oracle Database Administrator’s Guide for information about submitting commands and SQL to the database
-
Oracle Database Net Services Administrator's Guide for information about configuring Oracle Net Services
Services in a CDB
Clients access the root or a PDB through database services.
Database services have an optional PDB
property. When a PDB is created, a new default service for the PDB is created automatically. The service has the same name as the PDB. With the service name, you can access the PDB using the easy connect syntax or the net service name from the tnsnames.ora
file. Oracle Net Services must be configured properly for clients to access this service.
When a user connects using a service with a non-null PDB
property, the user name is resolved in the context of the specified PDB. When a user connects without specifying a service or using a service name with a null PDB
property, the user name is resolved in the context of the root. You can view the PDB
property for a service by querying the CDB_SERVICES
data dictionary view or by running the config service
command in the SRVCTL utility.
Note:
When two or more CDBs on the same computer system use the same listener and two or more PDBs have the same service name in these CDBs, a connection that specifies this service name connects randomly to one of the PDBs with the service name. To avoid incorrect connections, ensure that all service names for PDBs are unique on the computer system, or configure a separate listener for each CDB on the computer system.
See Also:
Session Limits in a CDB
The setting for the SESSIONS
initialization parameter limits the total number of sessions available in a CDB, including the sessions connected to PDBs.
If the limit is reached for the CDB, then users cannot connect to PDBs. To ensure that one PDB does not use too many sessions, you can limit the number of sessions available to a PDB by setting the SESSIONS
initialization parameter in the PDB.
User Names in a Multitenant Environment
Within each PDB, a user name must be unique with respect to other user names and roles in that PDB.
Note the following restrictions:
-
For common user names, names for user-created common users must begin with a common user prefix. By default, for CDB common users, this prefix is
C##
. For application common users, this prefix is an empty string. This means that there are no restrictions on the name that can be assigned to an application common user other than that it cannot start with the prefix reserved for CDB common users. For example, you could name a CDB common userc##hr_admin
and an application common userhr_admin
.The
COMMON_USER_PREFIX
parameter inCDB$ROOT
defines the common user prefix. You can change this setting, but do so only with great care. -
For local user names, the name cannot start with
C##
(orc##
). -
A user and a role cannot have the same name.
Related Topics
How the Multitenant Option Affects Password Files for Administrative Users
The password information for the local and common administrative users is stored in different locations.
-
For CDB common administrative users: The password information (hashes of the password) for the CDB common administrative users to whom administrative privileges were granted in the CDB root is stored in the password file.
-
For all users in a CDB to whom administrative privileges were granted outside the CDB root: To view information about the password hash information of these users, query the
$PWFILE_USERS
dynamic view.
Related Topics
Accessing a Container in a CDB
Access a container in a CDB with SQL*Plus by issuing a CONNECT
or ALTER SESSION
command.
Connecting to a Container Using the SQL*Plus CONNECT Command
You can use the SQL*Plus CONNECT
command to connect to the root or to a PDB.
Connecting to the CDB Root Using the SQL*Plus CONNECT Command
You can connect to the CDB root in several ways.
Specifically, you can use the following techniques to connect to the root with the SQL*Plus CONNECT
command:
-
Local connection
-
Local connection with operating system authentication
-
Database connection using easy connect
-
Database connection using a net service name
-
Remote database connection using external authentication
The following prerequisites must be met for the user connecting to the CDB root:
-
The user must be a common user.
-
The user must be granted
CREATE SESSION
privilege in the CDB root.
To connect to the root using the SQL*Plus CONNECT command:
-
Configure your environment so that you can open SQL*Plus.
-
Start SQL*Plus with the
/NOLOG
argument:sqlplus /nolog
-
Issue a SQL*Plus
CONNECT
command to connect to the root, as shown in the following examples.
Example 15-1 Connecting to the Root with a Local Connection
This example connects to the root in the local CDB as user SYSTEM
. SQL*Plus prompts for the SYSTEM
user password.
connect system
Example 15-2 Connecting to the Root with Operating System Authentication
This example connects locally to the root with the SYSDBA
administrative privilege with operating system authentication.
connect / as sysdba
Example 15-3 Connecting to the Root with a Net Service Name
Assume that clients are configured to have a net service name for the root in the CDB. For example, the net service name can be part of an entry in a tnsnames.ora
file.
This example connects as common user c##dba
to the database service designated by the net service name mycdb
. SQL*Plus prompts for the c##dba
user password.
connect c##dba@mycdb
See Also:
Oracle Database Administrator’s Guide for information about submitting commands and SQL to the database
Connecting to a PDB Using the SQL*Plus CONNECT Command
To connect to a PDB with the SQL*Plus CONNECT
command, you can use easy connect or a net service name.
To connect to a PDB, a user must be one of the following:
-
A common user with a
CREATE
SESSION
privilege granted commonly or granted locally in the PDB -
A local user defined in the PDB with
CREATE
SESSION
privilege
Only a user with SYSDBA
, SYSOPER
, SYSBACKUP
, or SYSDG
privilege can connect to a PDB that is in mounted mode. To change the open mode of a PDB, see "Modifying the Open Mode of PDBs".
To connect to a PDB using the SQL*Plus CONNECT command:
-
Configure your environment so that you can open SQL*Plus.
-
Start SQL*Plus with the
/NOLOG
argument:sqlplus /nolog
-
Issue a SQL*Plus
CONNECT
command using easy connect or a net service name to connect to the PDB.
Example 15-4 Connecting to a PDB
Assume that clients are configured to have a net service name for each PDB that matches each PDB name. For example, the net service name can be part of an entry in a tnsnames.ora
file.
The following command connects to the sh
local user in the salespdb
PDB:
CONNECT sh@salespdb
The following command connects to the SYSTEM
common user in the salespdb
PDB:
CONNECT system@salespdb
See Also:
Oracle Database Administrator’s Guide for information about submitting the SQL*PlusCONNECT
command
Switching to a Container Using the ALTER SESSION Statement
When you are connected to a container as a common user, you can switch to a different container and application service using the ALTER SESSION
statement.
You can use the following statement to switch to a different container and application service:
ALTER SESSION SET CONTAINER = container_name [SERVICE = service_name]
For container_name, specify one of the following:
-
CDB$ROOT
to switch to the CDB root -
PDB$SEED
to switch to the PDB seed -
A PDB name to switch to the PDB
When the current container is the root, you can view the names of the PDBs in a CDB by querying the
DBA_PDBS
view.
For service_name, specify a service that is running in the PDB. You can list the services running in the containers of a CDB, excluding the CDB root, by issuing the following query with the CDB root as the current container:
COL NAME FORMAT A30
COL CON_NAME FORMAT A20
SELECT NAME,CON_NAME, CON_ID
FROM V$ACTIVE_SERVICES
WHERE UPPER(NAME) != CON_NAME
AND CON_ID !=1
ORDER BY CON_ID;
By default, when you switch to a container, the session uses the default service for the container. However, the default PDB service does not support all service attributes and features such as service metrics, Fast Application Notification (FAN), load balancing, Resource Manager, Transaction Guard, Application Continuity, and so on. It is best practice to use a nondefault service for the container by specifying SERVICE = service_name
, where service_name is the name of the service.
With this new capability, connection pools can switch the service, and, when needed the PDB, on a connection when a connection is borrowed from the pool. Starting with Oracle Database 12c Release 2 (12.2.0.1), connection pools support more than one database service with universal connection pools (UCPs). It can also be used standalone.
When switching to a service, applications can consolidate to a CDB, while keeping the database services identified, prioritized, measured, and highly available. Switching to a nondefault service provides the following benefits:
-
It preserves the service attributes and features.
-
It eliminates too many connection pools with too many connections serving these tenants.
-
It allows applications to use more database services for workload control without consuming too many connection pools. Customers can identify and prioritize workloads using services without over sizing the database connections.
The following are considerations for using the ALTER SESSION SET CONTAINER
statement:
-
After the statement completes successfully, the current schema of the session is set to the schema owned by the common user in the specified container.
-
After the statement completes successfully, the security context is reset to that of the schema owned by the common user in the specified container.
-
After the statement completes successfully, login triggers for the specified container do not fire.
If you require a trigger, then you can define a before or after
SET CONTAINER
trigger in a PDB to fire before or after theALTER SESSION SET CONTAINER
statement is executed. -
After the statement completes successfully and the
SERVICE
clause specifies a nondefault service for the PDB, the session is using a new service with attributes set, including metrics, FAN, TAF, Application Continuity, Transaction Guard,drain_timeout
, andstop_option
for the new service. -
Package states are not shared across containers.
-
When closing a PDB, sessions that switched into the PDB and sessions that connected directly to the PDB are handled identically.
-
A transaction cannot span multiple containers. If you start a transaction and use
ALTER
SESSION
SET
CONTAINER
to switch to a different container, then you cannot issue DML, DDL,COMMIT
, orROLLBACK
statements until you switch back to the container in which you started the transaction. -
If you open a cursor and use
ALTER SESSION SET CONTAINER
to switch to different container, then you cannot fetch data from that cursor until you switch back to the container in which the cursor was opened. -
You can use the
ALTER SESSION SET CONTAINER
statement with theSERVICE
clause for connection pooling as well as advanced CDB administration.For example, you can use this statement for connection pooling with PDBs for a multitenant application. A multitenant application uses a single instance of the software on a server to serve multiple customers (tenants). In a CDB, each tenant can have its own PDB. You can use the
ALTER SESSION SET CONTAINER
statement in a connection pooling configuration. -
When working with connection pools that serve applications, the applications may be using data sources with different services. Using the
ALTER SESSION SET CONTAINER
statement with theSERVICE
clause enables the connection pool to use the same connections for many applications, sharing the services.
The following prerequisites must be met to use the ALTER SESSION SET CONTAINER
statement:
-
The current user must be a common user. The initial connection must be made using the SQL*Plus
CONNECT
command. -
When altering a session to switch to a PDB as a common user that was not supplied with Oracle Database, the current user must be granted the
SET
CONTAINER
privilege commonly or must be granted this privilege locally in the PDB.
Note:
When an ALTER SESSION SET CONTAINER
statement is used to switch to the current container, these prerequisites are not enforced, and no error message is returned if they are not met.
Before issuing an ALTER SESSION SET CONTAINER
statement with the SERVICE
clause, the following prerequisites must be met:
-
The service switched to must be active. You cannot switch to a service that is not running.
-
When switching between services, the service attributes of the service being switched from and the service being switched to must match. For example, the services switched from and to must all have TAF, or must all use Application Continuity, or must all have
drain_timeout
set.
To switch to a container using the ALTER SESSION statement:
-
In SQL*Plus, connect to a container as a common user with the required privileges.
-
Check the current open mode of the container to which you are switching.
To check the current open mode of the root or a PDB, query the
OPEN_MODE
column in theV$CONTAINERS
view when the current container is the root.If the open mode of the root should be changed, then follow the instructions in Oracle Database Administrator’s Guide about altering database availability to change the open mode.
If the open mode of the PDB should be changed, then follow the instructions in "Modifying the Open Mode of PDBs" to change the open mode.
The open mode of the root imposes limitations on the open mode of PDBs. For example, the root must be open before any PDBs can be open. Therefore, you might need to change the open mode of the root before changing the open mode of a PDB.
-
If you are switching to a specific service, then ensure that the service is running.
To check the active status of the service, query the
V$ACTIVE_SERVICES
view when the current container is the CDB root.If the service is not running, then use the SRVCTL utility or the
DBMS_SERVICE
package to start the service. -
Run the
ALTER SESSION SET CONTAINER
statement and specify the container to which you want to switch.Include the
SERVICE
clause to switch to a specific application service.
The following examples switch to various containers using ALTER
SESSION
.
Example 15-5 Switching to the PDB salespdb and Using the salesrep Service
ALTER SESSION SET CONTAINER = salespdb SERVICE = salesrep;
Example 15-6 Switching to the PDB salespdb and Using the Default Service
ALTER SESSION SET CONTAINER = salespdb;
Example 15-7 Switching to the CDB Root
ALTER SESSION SET CONTAINER = CDB$ROOT;
Example 15-8 Switching to the PDB Seed
ALTER SESSION SET CONTAINER = PDB$SEED;
Example 15-9 Switching Services Using a Dummy Service in the CDB Root
To design connection pooling that switches the container and the service, one method is to create a dummy service in the CDB root and set all required service attributes on this dummy service (for example, drain_timeout
, TAF or Application Continuity). The service attributes must match across the CDB root and the PDB. To use this method, complete the following steps:
-
Connect to the dummy service when first creating the connection pool and when creating new connections.
-
As services are added to each PDB, set the same attributes on these real services.
-
When an application requires a connection, complete one of the following actions:
-
Create a new connection to the dummy service, and switch to the PDB and service.
-
Borrow a free connection in the pool and switch to the PDB and service.
You do not need to return to the CDB root when switching across PDBs.
-
You do not need to return to the CDB root when switching across PDBs.
See Also:
Oracle Database Administrator’s Guide for information about database resident connection pooling
Starting Up and Shutting Down a CDB
When you start up a CDB, you create an instance and then determine the state of the CDB. Shutting down a currently running Oracle Database instance can optionally close and dismount a CDB.
See Also:
Oracle Real Application Clusters Administration and Deployment Guide for additional information specific to an Oracle Real Application Clusters environment
Starting Up a CDB
When you start up a CDB, you create an instance of that database and you determine the state of the database.
Normally, you start up an instance by mounting and opening the CDB. This operation makes the CDB available for any valid user to connect to and perform typical data access operations.
About Database Startup Options
When Oracle Restart is not in use, you can start up a database instance with SQL*Plus, Recovery Manager, or Oracle Enterprise Manager Cloud Control (Cloud Control). If your database is being managed by Oracle Restart, then Oracle recommends starting the database with SRVCTL.
Oracle Database Administrator’s Guide for information about Oracle Restart
Starting Up a Database Using SQL*Plus
You can start a SQL*Plus session, connect to Oracle Database with administrator privileges, and then issue the STARTUP
command. Using SQL*Plus in this way is the only method described in detail in this book.
-
Run the SQL*Plus
STARTUP
command.
Related Topics
Starting Up a Database Using Recovery Manager
You can also use Recovery Manager (RMAN) to execute STARTUP
and SHUTDOWN
commands. You may prefer to do this if your are within the RMAN environment and do not want to invoke SQL*Plus.
-
Run an RMAN
STARTUP
command.
See Also:
Oracle Database Backup and Recovery Reference for information about the RMAN STARTUP
command
Starting Up a Database Using Cloud Control
You can use Cloud Control to administer your database, including starting it up and shutting it down. Cloud Control combines a GUI console, agents, common services, and tools to provide an integrated and comprehensive systems management platform for managing Oracle products. Cloud Control enables you to perform the functions discussed in this book using a GUI interface, rather than command line operations.
-
In Cloud Control, start the database instance.
See Also:
The Cloud Control online help
Starting Up a Database Using SRVCTL
When Oracle Restart is installed and configured for your database, Oracle recommends that you use SRVCTL to start the database.
Starting the database instance with SRVCTL ensures that:
-
Any components on which the database depends (such as Oracle Automatic Storage Management and the Oracle Net listener) are automatically started first, and in the proper order.
-
The database is started according to the settings in its Oracle Restart configuration. An example of such a setting is the server parameter file location.
-
Environment variables stored in the Oracle Restart configuration for the database are set before starting the instance.
To start a database instance with SRVCTL:
-
Run the
srvctl start database
command.
Oracle Database Administrator’s Guide to learn more about srvctl start database
Specifying Initialization Parameters at Startup
To start a database instance, the CDB must read instance configuration parameters (the initialization parameters) from either a server parameter file (SPFILE
) or a text initialization parameter file (PFILE).
The CDB looks for these files in a default location. You can specify nondefault locations for these files, and the method for doing so depends on whether you start the database with SQL*Plus (when Oracle Restart is not in use) or with SRVCTL (when the database is being managed with Oracle Restart).
See Also:
"Creating a CDB: Basic Steps" for more information about initialization parameters, initialization parameter files, and server parameter files
About Initialization Parameter Files and Startup
When you start the database instance, it attempts to read the initialization parameters from an SPFILE
in a platform-specific default location. If it finds no SPFILE
, then it searches for a text initialization parameter file.
In the platform-specific default location, Oracle Database locates your initialization parameter file by examining file names in the following order:
-
The location specified by the
-spfile
option in the SRVCTL commandssrvctl add database
orsrvctl modify database
You can check the current setting with the
srvctl config database
command. -
spfile
ORACLE_SID
.ora
-
spfile.ora
-
init
ORACLE_SID
.ora
The first three files are SPFILE
s and the fourth is a text initialization parameter file. If DBCA created the SPFILE in an Oracle Automatic Storage Management disk group, then the database searches for the SPFILE in the disk group.
When AS COPY
is not specified in a CREATE SPFILE
statement and the database is defined as a resource in Oracle Clusterware, if you specify both the spfile_name
and the FROM PFILE
clause, then this statement automatically updates the SPFILE name and location in the database resource. When AS COPY
is specified in a CREATE SPFILE
statement, the SPFILE is copied, and the database resource is not updated.
Note:
The spfile.ora
file is included in this search path because in an Oracle Real Application Clusters environment one server parameter file is used to store the initialization parameter settings for all instances. There is no instance-specific location for storing a server parameter file.
If you (or the Database Configuration Assistant) created a server parameter file, but you want to override it with a text initialization parameter file, then you can do so with SQL*Plus, specifying the PFILE
clause of the STARTUP
command to identify the initialization parameter file:
STARTUP PFILE = /u01/oracle/dbs/init.ora
Nondefault Server Parameter Files
A nondefault server parameter file (SPFILE
) is an SPFILE
that is in a location other than the default location. It is not usually necessary to start an instance with a nondefault SPFILE
. However, should such a need arise, both SRVCTL (with Oracle Restart) and SQL*Plus provide ways to do so. These are described later in this section.
Initialization Files and Oracle Automatic Storage Management
A database that uses Oracle Automatic Storage Management (Oracle ASM) usually has a nondefault SPFILE
. If you use the Database Configuration Assistant (DBCA) to configure a database to use Oracle ASM, DBCA creates an SPFILE
for the database instance in an Oracle ASM disk group, and then causes a text initialization parameter file (PFILE) to be created in the default location in the local file system to point to the SPFILE
, as explained in the next section.
See Also:
-
"Table 4-1" lists PFILE and SPFILE default names and locations.
-
Oracle Real Application Clusters Administration and Deployment Guide for more information about the server parameter file for an Oracle Real Application Clusters environment
-
Oracle Database Administrator’s Guide for the SRVCTL Command Reference for Oracle Restart
Starting Up with SQL*Plus with a Nondefault Server Parameter File
With SQL*Plus, you can use the PFILE
clause to start an instance with a nondefault server parameter file.
To start up with SQL*Plus with a nondefault server parameter file:
The SPFILE
must reside on the database host computer. Therefore, the preceding method also provides a means for a client system to start a database that uses an SPFILE
. It also eliminates the need for a client system to maintain a client-side initialization parameter file. When the client system reads the initialization parameter file containing the SPFILE
parameter, it passes the value to the server where the specified SPFILE
is read.
Starting Up with SRVCTL with a Nondefault Server Parameter File
If your database is being managed by Oracle Restart, then you can specify the location of a nondefault SPFILE by setting or modifying the SPFILE location option in the Oracle Restart configuration for the database.
To start up with SRVCTL with a nondefault server parameter file:
See Also:
Oracle Database Administrator’s Guide for the SRVCTL Command Reference for Oracle Restart
About Automatic Startup of Database Services
When your database is managed by Oracle Restart, you can configure startup options for each individual database service (service).
If you set the management policy for a service to AUTOMATIC
(the default), the service starts automatically when you start the database with SRVCTL. If you set the management policy to MANUAL
, the service does not automatically start, and you must manually start it with SRVCTL. A MANUAL
setting does not prevent Oracle Restart from monitoring the service when it is running and restarting it if a failure occurs.
In an Oracle Data Guard (Data Guard) environment in which databases are managed by Oracle Restart, you can additionally control automatic startup of services by assigning Data Guard roles to the services in their Oracle Restart configurations. A service automatically starts upon manual database startup only if the management policy of the service is AUTOMATIC
and if one of its assigned roles matches the current role of the database.
Note:
When using Oracle Restart, Oracle strongly recommends that you use SRVCTL to create database services.
See Also:
srvctl add service and srvctl modify service in Oracle Database Administrator’s Guide for the syntax for setting the management policy of and Data Guard roles for a service
Preparing to Start Up an Instance
You must perform some preliminary steps before attempting to start an instance of your CDB using SQL*Plus.
Note:
The following instructions are for installations where Oracle Restart is not in use.
To prepare for starting an instance:
Now you are connected to the CDB root and ready to start up an instance of your database.
See Also:
-
Oracle Database Administrator’s Guide to learn about operating system authentication
-
Oracle Database Administrator’s Guide for information about setting environment variables to connect to an Oracle instance
-
Oracle Database Administrator’s Guide if your database is being managed by Oracle Restart
-
SQL*Plus User's Guide and Reference for descriptions and syntax for the
CONNECT
,STARTUP
, andSHUTDOWN
commands
Starting Up an Instance
You can start up an instance using SQL*Plus or Oracle Restart.
About Starting Up an Instance
When Oracle Restart is not in use, you use the SQL*Plus STARTUP
command to start up an Oracle Database instance. If your database is being managed by Oracle Restart, Oracle recommends that you use the srvctl start database
command.
With SQL*Plus and Oracle Restart, you can start a database instance in various modes:
-
NOMOUNT
—Start the instance without mounting a CDB. This does not allow access to the database and usually would be done only for database creation or the re-creation of control files. -
MOUNT
—Start the instance and mount the CDB, but leave it closed. This state allows for certain DBA activities, but does not allow general access to the database. -
OPEN
—Start the instance, and mount and open the CDB. This can be done in unrestricted mode, allowing access to all users, or in restricted mode, allowing access for database administrators only. -
FORCE
—Force the instance to start after a startup or shutdown problem. -
OPEN RECOVER
—Start the instance and have complete media recovery begin immediately.
Note:
You cannot start a database instance if you are connected to the database through a shared server process.
The following scenarios describe and illustrate the various states in which you can start up an instance. Some restrictions apply when combining clauses of the STARTUP
command or combining startup options for the srvctl start database
command.
Note:
It is possible to encounter problems starting up an instance if control files, database files, or online redo logs are not available. If one or more of the files specified by the CONTROL_FILES
initialization parameter does not exist or cannot be opened when you attempt to mount a database, Oracle Database returns a warning message and does not mount the database. If one or more of the data files or online redo logs is not available or cannot be opened when attempting to open a database, the database returns a warning message and does not open the database.
See Also:
-
SQL*Plus User's Guide and Reference for details on the
STARTUP
command syntax -
Oracle Database Administrator’s Guide for instructions for starting a database that is managed by Oracle Restart
Starting an Instance, and Mounting and Opening a Database
Normal database operation means that an instance is started and the database is mounted and open. This mode allows any valid user to connect to the database and perform data access operations.
The following command starts an instance, reads the initialization parameters from the default location, and then mounts and opens the database.
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
STARTUP |
srvctl start database -db db_unique_name |
where db_unique_name
matches the DB_UNIQUE_NAME
initialization parameter.
Starting an Instance Without Mounting a Database
You can start an instance without mounting a database. Typically, you do so only during database creation.
Use one of the following commands:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
STARTUP NOMOUNT |
srvctl start database -db db_unique_name -startoption nomount |
Starting an Instance and Mounting a Database
You can start an instance and mount a CDB without opening it, allowing you to perform specific maintenance operations.
For example, the CDB must be mounted but not open during the following tasks:
-
Starting with Oracle Database 12c Release 1 (12.1.0.2), putting a database instance in force full database caching mode. For more information, see Oracle Database Administrator’s Guide.
-
Enabling and disabling redo log archiving options. For more information, see Oracle Database Administrator’s Guide.
-
Performing full database recovery. For more information, see Oracle Database Backup and Recovery User’s Guide.
The following command starts an instance and mounts the database, but leaves the database closed:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
|
|
Restricting Access to an Instance at Startup
You can start an instance, and optionally mount and open a database, in restricted mode so that the instance is available only to administrative personnel (not general database users).
Use this mode of instance startup when you must accomplish one of the following tasks:
-
Perform an export or import of data
-
Perform a data load (with SQL*Loader)
-
Temporarily prevent typical users from using data
-
Perform certain migration or upgrade operations
Typically, all users with the CREATE SESSION
system privilege can connect to an open database. Opening a database in restricted mode allows database access only to users with both the CREATE SESSION
and RESTRICTED SESSION
system privilege. Only database administrators should have the RESTRICTED SESSION
system privilege. Further, when the instance is in restricted mode, a database administrator cannot access the instance remotely through an Oracle Net listener, but can only access the instance locally from the system that the instance is running on.
The following command starts an instance (and mounts and opens the database) in restricted mode:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
|
|
You can use the restrict mode in combination with the mount, nomount, and open modes.
Later, use the ALTER SYSTEM
statement to disable the RESTRICTED SESSION
feature:
ALTER SYSTEM DISABLE RESTRICTED SESSION;
See Also:
-
Oracle Database Administrator’s Guide to learn how to use the
ALTER SYSTEM
statement to restrict access after you open the database in nonrestricted mode -
Oracle Database SQL Language Reference for more information on the
ALTER SYSTEM
statement
Forcing an Instance to Start
In unusual circumstances, you might experience problems when attempting to start a database instance, and you can force a database instance to start.
You should not force a database to start unless you are faced with the following:
-
You cannot shut down the current instance with the
SHUTDOWN NORMAL
,SHUTDOWN IMMEDIATE
, orSHUTDOWN TRANSACTIONAL
commands. -
You experience problems when starting an instance.
If one of these situations arises, you can usually solve the problem by starting a new instance (and optionally mounting and opening the database) using one of these commands:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
|
|
If an instance is running, the force mode shuts it down with mode ABORT
before restarting it. In this case, the alert log shows the message "Shutting down instance (abort)
" followed by "Starting ORACLE instance (normal)
."
See Also:
"Shutting Down with the Abort Mode" to understand the side effects of aborting the current instance
Starting an Instance, Mounting a Database, and Starting Complete Media Recovery
If you know that media recovery is required, then you can start an instance, mount a database to the instance, and have the recovery process automatically start.
To do so, use one of these commands:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
STARTUP OPEN RECOVER |
srvctl start database -db db_unique_name -startoption "open,recover" |
If you attempt to perform recovery when no recovery is required, Oracle Database issues an error message.
Automatic Database Startup at Operating System Start
Many sites use procedures to enable automatic startup of one or more Oracle Database instances and databases immediately following a system start.
The procedures for performing this task are specific to each operating system. For information about automatic startup, see your operating system specific Oracle documentation.
The preferred (and platform-independent) method of configuring automatic startup of a database is Oracle Restart.
See Also:
Oracle Database Administrator’s Guide to learn about Oracle Restart
Altering Database Availability
You can alter the availability of a database. You may want to do this in order to restrict access for maintenance reasons or to make the database read only.
Mounting a Database to an Instance
When you perform specific administrative operations, the database must be started and mounted to an instance, but closed. You can achieve this scenario by starting the instance and mounting the database.
-
To mount a database to a previously started, but not opened instance, use the SQL statement
ALTER DATABASE
with theMOUNT
clause as follows:ALTER DATABASE MOUNT;
See Also:
"Starting an Instance and Mounting a Database" for a list of operations that require the database to be mounted and closed (and procedures to start an instance and mount a database in one step)
Opening a Closed Database
When a database is mounted but closed, you can make it available for general use by opening it.
-
To open a mounted database, use the
ALTER DATABASE
SQL statement with theOPEN
clause:ALTER DATABASE OPEN;
After executing this statement, any valid Oracle Database user with the CREATE SESSION
system privilege can connect to the database.
Opening a Database in Read-Only Mode
Opening a database in read-only mode enables you to query an open database while eliminating any potential for online data content changes.
While opening a database in read-only mode guarantees that data files and redo log files are not written to, it does not restrict database recovery or operations that change the state of the database without generating redo. For example, you can take data files offline or bring them online since these operations do not affect data content.
If a query against a database in read-only mode uses temporary tablespace, for example to do disk sorts, then the issuer of the query must have a locally managed tablespace assigned as the default temporary tablespace. Otherwise, the query will fail.
The following statement opens a database in read-only mode:
ALTER DATABASE OPEN READ ONLY;
You can also open a database in read/write mode as follows:
ALTER DATABASE OPEN READ WRITE;
However, read/write is the default mode.
Note:
You cannot use the RESETLOGS
clause with a READ ONLY
clause.
Limitations of a Read-only Database
-
An application must not write database objects while executing against a read-only database. For example, an application writes database objects when it inserts, deletes, updates, or merges rows in a database table, including a global temporary table. An application writes database objects when it manipulates a database sequence. An application writes database objects when it locks rows, when it runs
EXPLAIN PLAN
, or when it executes DDL. Many of the functions and procedures in Oracle-supplied PL/SQL packages, such asDBMS_SCHEDULER
, write database objects. If your application calls any of these functions and procedures, or if it performs any of the preceding operations, your application writes database objects and hence is not read-only. -
When executing on a read-only database, you must commit or roll back any in-progress transaction that involves one database link before you use another database link. This is true even if you execute a generic
SELECT
statement on the first database link and the transaction is currently read-only. -
You cannot compile or recompile PL/SQL stored procedures on a read-only database. To minimize PL/SQL invalidation because of remote procedure calls, use
REMOTE_DEPENDENCIES_MODE=SIGNATURE
in any session that does remote procedure calls on a read-only database. -
You cannot invoke a remote procedure (even a read-only remote procedure) from a read-only database if the remote procedure has never been called on the database. This limitation applies to remote procedure calls in anonymous PL/SQL blocks and in SQL statements. You can either put the remote procedure call in a stored procedure, or you can invoke the remote procedure in the database before it becomes read only.
See Also:
Oracle Database SQL Language Reference for more information about the ALTER DATABASE
statement
Restricting Access to an Open Database
When a database is in restricted mode, only users with the RESTRICTED SESSION
privilege can initiate new connections. Users connecting as SYSDBA
or connecting with the DBA
role have this privilege.
To place an already running instance in restricted mode:
-
Run the SQL statement
ALTER SYSTEM
with theENABLE RESTRICTED SESSION
clause.
When you place a running instance in restricted mode, no user sessions are terminated or otherwise affected. Therefore, after placing an instance in restricted mode, consider killing (terminating) all current user sessions before performing administrative tasks.
To lift an instance from restricted mode, use ALTER SYSTEM
with the DISABLE RESTRICTED SESSION
clause.
See Also:
-
Oracle Database Administrator’s Guide for directions for killing user sessions
-
Oracle Database Administrator’s Guide to learn some reasons for placing an instance in restricted mode
Shutting Down a CDB
You can shut down a CDB with SQL*Plus or Oracle Restart.
About Shutting Down the Database
When Oracle Restart is not in use, you can shut down a database instance with SQL*Plus by connecting as SYSOPER
, SYSDBA
, SYSBACKUP
, or SYSDG
and issuing the SHUTDOWN
command. If your database is being managed by Oracle Restart, the recommended way to shut down the database is with the srvctl stop database
command.
Control is not returned to the session that initiates a database shutdown until shutdown is complete. Users who attempt connections while a shutdown is in progress receive a message like the following:
ORA-01090: shutdown in progress - connection is not permitted
Note:
You cannot shut down a database if you are connected to the database through a shared server process.
There are several modes for shutting down a database: normal, immediate, transactional, and abort. Some shutdown modes wait for certain events to occur (such as transactions completing or users disconnecting) before actually bringing down the database. There is a one-hour timeout period for these events.
See Also:
Oracle Database Administrator’s Guide for information about Oracle Restart
Shutting Down with the Normal Mode
When you shut down a database with the normal mode, the database waits for all connected users to disconnect before shutting down. Normal mode is the default mode of shutdown.
To shut down a database in normal situations, use one of these commands:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
SHUTDOWN [NORMAL] |
srvctl stop database -db db_unique_name -stopoption normal |
The NORMAL
clause of the SQL*Plus SHUTDOWN
command is optional because this is the default shutdown method. For SRVCTL, if the -stopoption
option is omitted, the shutdown operation proceeds according to the stop options stored in the Oracle Restart configuration for the database. The default stop option is immediate
.
Normal database shutdown proceeds with the following conditions:
-
No new connections are allowed after the statement is issued.
-
Before the database is shut down, the database waits for all currently connected users to disconnect from the database.
The next startup of the database will not require any instance recovery procedures.
Shutting Down with the Immediate Mode
When you shut down a database with the immediate mode, Oracle Database terminates any executing SQL statements and disconnects users. Active transactions are terminated and uncommitted changes are rolled back.
Use immediate database shutdown only in the following situations:
-
To initiate an automated and unattended backup
-
When a power shutdown is going to occur soon
-
When the database or one of its applications is functioning irregularly and you cannot contact users to ask them to log off or they are unable to log off
To shut down a database immediately, use one of the following commands:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
SHUTDOWN IMMEDIATE |
srvctl stop database -db db_unique_name -stopoption immediate |
Immediate database shutdown proceeds with the following conditions:
-
No new connections are allowed, nor are new transactions allowed to be started, after the statement is issued.
-
Any uncommitted transactions are rolled back. (If long uncommitted transactions exist, this method of shutdown might not complete quickly, despite its name.)
-
Oracle Database does not wait for users currently connected to the database to disconnect. The database implicitly rolls back active transactions and disconnects all connected users.
The next startup of the database will not require any instance recovery procedures.
Shutting Down with the Transactional Mode
When you shut down a database with transactional mode, the database prevents users from starting new transactions, but waits for all current transactions to complete before shutting down. This mode can take a significant amount of time depending on the nature of the current transactions.
When you want to perform a planned shutdown of an instance while allowing active transactions to complete first, use one of the following commands:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
SHUTDOWN TRANSACTIONAL |
srvctl stop database -db db_unique_name -stopoption transactional |
Transactional database shutdown proceeds with the following conditions:
-
No new connections are allowed, nor are new transactions allowed to be started, after the statement is issued.
-
After all transactions have completed, any client still connected to the instance is disconnected.
-
At this point, the instance shuts down just as it would when a
SHUTDOWN IMMEDIATE
statement is submitted.
The next startup of the database will not require any instance recovery procedures.
A transactional shutdown prevents clients from losing work, and at the same time, does not require all users to log off.
Shutting Down with the Abort Mode
You can shut down a database instantaneously by aborting the database instance.
If possible, perform this type of shutdown only in the following situations:
-
The database or one of its applications is functioning irregularly and none of the other types of shutdown works.
-
You must shut down the database instantaneously (for example, if you know a power shutdown is going to occur in one minute).
-
You experience problems when starting a database instance.
When you must do a database shutdown by aborting transactions and user connections, use one of the following commands:
SQL*Plus | SRVCTL (When Oracle Restart Is In Use) |
---|---|
SHUTDOWN ABORT |
srvctl stop database -db db_unique_name -stopoption abort |
An aborted database shutdown proceeds with the following conditions:
-
No new connections are allowed, nor are new transactions allowed to be started, after the statement is issued.
-
Current client SQL statements being processed by Oracle Database are immediately terminated.
-
Uncommitted transactions are not rolled back.
-
Oracle Database does not wait for users currently connected to the database to disconnect. The database implicitly disconnects all connected users.
The next startup of the database will require automatic instance recovery procedures.
Shutdown Timeout
Shutdown modes that wait for users to disconnect or for transactions to complete have a limit on the amount of time that they wait.
If all events blocking the shutdown do not occur within one hour, the shutdown operation aborts with the following message: ORA-01013: user requested cancel of current operation
. This message is also displayed if you interrupt the shutdown process, for example by pressing CTRL-C
. Oracle recommends that you do not attempt to interrupt an instance shutdown. Instead, allow the shutdown process to complete, and then restart the instance.
After ORA-01013
occurs, you must consider the instance to be in an unpredictable state. You must therefore continue the shutdown process by resubmitting a SHUTDOWN
command. If subsequent SHUTDOWN
commands continue to fail, you must submit a SHUTDOWN
ABORT
command to bring down the instance. You can then restart the instance.
Quiescing a CDB
A quiesced CDB allows only DBA transactions, queries, fetches, or PL/SQL statements.
About Quiescing a Database
Occasionally you might want to put a database in a state that allows only DBA transactions, queries, fetches, or PL/SQL statements. Such a state is referred to as a quiesced state, in the sense that no ongoing non-DBA transactions, queries, fetches, or PL/SQL statements are running in the system.
Note:
In this discussion of quiesce database, a DBA is defined as user SYS
or SYSTEM
. Other users, including those with the DBA
role, are not allowed to issue the ALTER SYSTEM QUIESCE DATABASE
statement or proceed after the database is quiesced.
The quiesced state lets administrators perform actions that cannot safely be done otherwise. These actions include:
-
Actions that fail if concurrent user transactions access the same object, for example, changing the schema of a database table or adding a column to an existing table where a no-wait lock is required.
-
Actions whose undesirable intermediate effect can be seen by concurrent user transactions, for example, a multistep procedure for reorganizing a table when the table is first exported, then dropped, and finally imported. A concurrent user who attempts to access the table after it was dropped, but before import, would not have an accurate view of the situation.
Without the ability to quiesce the database, you would need to shut down the database and reopen it in restricted mode. This is a serious restriction, especially for systems requiring 24 x 7 availability. Quiescing a database is much a smaller restriction, because it eliminates the disruption to users and the downtime associated with shutting down and restarting the database.
When the database is in the quiesced state, it is through the facilities of the Database Resource Manager that non-DBA sessions are prevented from becoming active. Therefore, while this statement is in effect, any attempt to change the current resource plan will be queued until after the system is unquiesced.
See Also:
Oracle Database Administrator’s Guide for more information about the Database Resource Manager
Placing a Database into a Quiesced State
When you place a database in quiesced state, non-DBA active sessions will continue until they become inactive. An active session is one that is currently inside of a transaction, a query, a fetch, or a PL/SQL statement; or a session that is currently holding any shared resources (for example, enqueues). No inactive sessions are allowed to become active.
For example, If a user issues a SQL query in an attempt to force an inactive session to become active, the query will appear to be hung. When the database is later unquiesced, the session is resumed, and the blocked action is processed.
-
To place a database into a quiesced state, issue the following SQL statement:
ALTER SYSTEM QUIESCE RESTRICTED;
Once all non-DBA sessions become inactive, the ALTER SYSTEM QUIESCE RESTRICTED
statement completes, and the database is in a quiesced state. In an Oracle Real Application Clusters environment, this statement affects all instances, not just the one that issues the statement.
The ALTER SYSTEM QUIESCE RESTRICTED
statement may wait a long time for active sessions to become inactive. You can determine the sessions that are blocking the quiesce operation by querying the V$BLOCKING_QUIESCE
view. This view returns only a single column: SID
(Session ID). You can join it with V$SESSION
to get more information about the session, as shown in the following example:
select bl.sid, user, osuser, type, program from v$blocking_quiesce bl, v$session se where bl.sid = se.sid;
If you interrupt the request to quiesce the database, or if your session terminates abnormally before all active sessions are quiesced, then Oracle Database automatically reverses any partial effects of the statement.
For queries that are carried out by successive multiple Oracle Call Interface (OCI) fetches, the ALTER SYSTEM QUIESCE RESTRICTED
statement does not wait for all fetches to finish. It only waits for the current fetch to finish.
For both dedicated and shared server connections, all non-DBA logins after this statement is issued are queued by the Database Resource Manager, and are not allowed to proceed. To the user, it appears as if the login is hung. The login will resume when the database is unquiesced.
The database remains in the quiesced state even if the session that issued the statement exits. A DBA must log in to the database to issue the statement that specifically unquiesces the database.
Note:
You cannot perform a cold backup when the database is in the quiesced state, because Oracle Database background processes may still perform updates for internal purposes even while the database is quiesced. In addition, the file headers of online data files continue to appear to be accessible. They do not look the same as if a clean shutdown had been performed. However, you can still take online backups while the database is in a quiesced state.
See Also:
-
Oracle Database Reference for more information about the
V$BLOCKING_QUIESCE
view -
Oracle Database Reference for more information about the
V$SESSION
view
Restoring the System to Normal Operation
When you restore the system to normal operation, all non-DBA activity is allowed to proceed.
-
To restore the database to normal operation, issue the following SQL statement:
ALTER SYSTEM UNQUIESCE;
In an Oracle Real Application Clusters environment, this statement is not required to be issued from the same session, or even the same instance, as that which quiesced the database. If the session issuing the ALTER SYSTEM UNQUIESCE
statement terminates abnormally, then the Oracle Database server ensures that the unquiesce operation completes.
Viewing the Quiesce State of an Instance
You can view the quiesce state of an instance by querying the V$INSTANCE
view.
To view the quiesce state of an instance:
-
Query the
ACTIVE_STATE
column of theV$INSTANCE
view.
The column has one of these values:
-
NORMAL
: Normal unquiesced state. -
QUIESCING
: Being quiesced, but some non-DBA sessions are still active. -
QUIESCED
: Quiesced; no non-DBA sessions are active or allowed.
Suspending and Resuming a Database
The ALTER SYSTEM SUSPEND
statement halts all input and output (I/O) to data files (file header and file data) and control files. The suspended state lets you back up a database without I/O interference. When the database is suspended all preexisting I/O operations are allowed to complete and any new database accesses are placed in a queued state. Use the ALTER SYSTEM RESUME
statement to resume normal database operations.
To suspend database operations:
-
Run the
ALTER SYSTEM SUSPEND
statement.
To resume database operations:
-
Run the
ALTER SYSTEM RESUME
statement.
The suspend command is not specific to an instance. In an Oracle Real Application Clusters environment, when you issue the suspend command on one system, internal locking mechanisms propagate the halt request across instances, thereby quiescing all active instances in a given cluster. However, if a new instance is started while another instance is being suspended, then the new instance is not suspended.
The SUSPEND
and RESUME
commands can be issued from different instances. For example, if instances 1, 2, and 3 are running, and you issue an ALTER SYSTEM SUSPEND
statement from instance 1, then you can issue a RESUME
statement from instance 1, 2, or 3 with the same effect.
The suspend/resume feature is useful in systems that allow you to mirror a disk or file and then split the mirror, providing an alternative backup and restore solution. If you use a system that cannot split a mirrored disk from an existing database while writes are occurring, then you can use the suspend/resume feature to facilitate the split.
The suspend/resume feature is not a suitable substitute for normal shutdown operations, because copies of a suspended database can contain uncommitted updates.
Note:
Do not use the ALTER SYSTEM SUSPEND
statement as a substitute for placing a tablespace in hot backup mode. Precede any database suspend operation by an ALTER TABLESPACE BEGIN BACKUP
statement.
The following statements illustrate ALTER SYSTEM SUSPEND/RESUME
usage. The V$INSTANCE
view is queried to confirm database status.
SQL> ALTER SYSTEM SUSPEND; System altered SQL> SELECT DATABASE_STATUS FROM V$INSTANCE; DATABASE_STATUS --------- SUSPENDED SQL> ALTER SYSTEM RESUME; System altered SQL> SELECT DATABASE_STATUS FROM V$INSTANCE; DATABASE_STATUS --------- ACTIVE
See Also:
Oracle Database Backup and Recovery User's Guide for details about backing up a database using the database suspend/resume feature
Delaying Instance Abort
The INSTANCE_ABORT_DELAY_TIME
initialization parameter specifies the amount of time, in seconds, to delay shutting down a database when an error causes the instance to abort.
Some errors cause the Oracle database instance to abort. You can use the INSTANCE_ABORT_DELAY_TIME
initialization parameter to specify the amount of time to delay shutting down the instance. A database administrator can use the delay time to get information about the error and minimize problems that can result when an instance aborts. For example, a database administrator might use the delay time to get diagnostics, redirect connections using Transparent Application Failover (TAF), and flush the buffer cache. A message is written to the alert log when a delayed abort is initiated.
Caution:
Do not set the INSTANCE_ABORT_DELAY_TIME
value too high. Since the instance is closing because of an error, some processes or resources might be corrupted or unavailable, which can make complex actions impossible.
To delay instance abort:
-
Set the
INSTANCE_ABORT_DELAY_TIME
initialization parameter to the number of seconds to delay shutting down an instance when an error causes it to abort.This parameter is set to
0
by default.
Example 15-10 Setting the INSTANCE_ABORT_DELAY_TIME Initialization Parameter
ALTER SYSTEM SET INSTANCE_ABORT_DELAY_TIME=60;
Modifying a CDB at the System Level
You can set initialization parameters at the CDB level. In some cases, you can override these parameters at the PDB level.
About System-Level Modifications of a CDB
The ALTER SYSTEM SET
statement dynamically sets an initialization parameter in one or more containers.
A CDB uses an inheritance model for initialization parameters in which PDBs inherit initialization parameter values from the root. In this case, inheritance means that the value of a specific parameter in the root applies to a specific PDB.
A PDB can override the root setting for some parameters. In such cases, a PDB has an inheritance property for each initialization parameter that is either true or false. The inheritance property is true for a parameter when the PDB inherits the root's value for the parameter; otherwise, the property is false.
The inheritance property for some parameters must be true. For other parameters, when the current container is the PDB, you can change the inheritance property by running the ALTER SYSTEM SET
statement. If V$SYSTEM_PARAMETER.ISPDB_MODIFIABLE
is TRUE
for an initialization parameter, then the inheritance property can be false for the parameter.
When the current container is the root, the CONTAINER
clause of the ALTER SYSTEM SET
statement controls which PDBs inherit the parameter value being set. The CONTAINER
clause has the following syntax:
CONTAINER = { CURRENT | ALL }
The following settings are possible:
-
CURRENT
The parameter setting applies only to the current container. This is the default setting for
CONTAINER
. When the current container is the root, the parameter setting applies to the root and to any PDB with an inheritance property of true for the parameter. -
ALL
The parameter setting applies to all containers in the CDB, including the root and all PDBs. Specifying
ALL
sets the inheritance property to true for the parameter in all PDBs.
See Also:
"About the Current Container" for more information about the CONTAINER
clause and rules that apply to it
Modifying a CDB with ALTER SYSTEM
To modify a CDB at the system level, use the ALTER SYSTEM
statement.
Prerequisites
The current user must have the commonly granted ALTER SYSTEM
privilege.
To use ALTER SYSTEM SET in the root in a CDB:
-
In SQL*Plus, ensure that the current container is the root.
-
Run the
ALTER SYSTEM SET
statement.
Note:
To change the inheritance property for a parameter in a PDB from false to true, run the ALTER SYSTEM RESET
statement to reset the parameter when the current container is the PDB. The following sample statement resets the OPEN_CURSORS
parameter:
ALTER SYSTEM RESET OPEN_CURSORS SCOPE = SPFILE;
Example 15-11 Setting an Initialization Parameter for All Containers
This ALTER SYSTEM SET
statement sets the OPEN_CURSORS
initialization parameter to 200
for the all containers and sets the inheritance property to TRUE
in each PDB.
ALTER SYSTEM SET OPEN_CURSORS = 200 CONTAINER = ALL;
Example 15-12 Setting an Initialization Parameter for the Root
This ALTER SYSTEM SET
statement sets the OPEN_CURSORS
initialization parameter to 200
for the root and for PDBs with an inheritance property of true for the parameter.
ALTER SYSTEM SET OPEN_CURSORS = 200 CONTAINER = CURRENT;
See Also:
-
Oracle Database SQL Language Reference for more information about the
ALTER SYSTEM SET
statement
Modifying Containers When Connected to the CDB Root
You can modify the entire CDB or the root with the ALTER DATABASE
statement.
About Container Modification When Connected to CDB Root
The ALTER DATABASE
statement modifies a CDB. When you are connected to the CDB root, the ALTER PLUGGABLE DATABASE
statement can modify the open mode of one or more PDBs.
The behavior of ALTER DATABASE
and ALTER PLUGGABLE DATABASE
depends on which container you are connected to when you use the statement:
-
Connected as a common user to CDB root
When an
ALTER DATABASE
statement with theRENAME GLOBAL_NAME
clause modifies the domain of a CDB, it affects the domain of each PDB with a domain that defaults to that of the CDB. TheALTER PLUGGABLE DATABASE
statement with the pdb_change_state clause modifies the open mode of one or more PDBs. -
Connected to a PDB
In this case, the
ALTER DATABASE
andALTER PLUGGABLE DATABASE
statements modify the current PDB only.
The following table lists which containers are modified by clauses in ALTER DATABASE
and ALTER PLUGGABLE DATABASE
statements.
Table 15-3 Statements That Modify Containers in a CDB
Modify Entire CDB | Modify Root Only | Modify One or More PDBs |
---|---|---|
When connected as a common user whose current container is the root, |
When connected as a common user whose current container is the root,
You can use these clauses to set nondefault values for specific PDBs. |
When connected as a common user whose current container is the root, When the current container is a PDB, When connected as a common user whose current container is the root, |
Modifying an Entire CDB Using ALTER DATABASE
You can use the ALTER DATABASE
statement to modify an entire CDB, including the root and all PDBs. Most ALTER DATABASE
statements modify the entire CDB.
For a list of statements that modify the entire CDB rather than the root or individual PDBs, see the "Modify Entire CDB" column of "About Container Modification When Connected to CDB Root".
Prerequisites
To modify an entire CDB, the following prerequisites must be met:
-
The current user must be a common user with the
ALTER DATABASE
privilege. -
To use an
ALTER DATABASE
statement with a recovery_clause, the current user must have theSYSDBA
administrative privilege commonly granted. In this case, you must exercise this privilege usingAS SYSDBA
at connect time.
To modify an entire CDB:
-
In SQL*Plus, ensure that the current container is the root.
-
Use an
ALTER DATABASE
statement with a clause that modifies an entire CDB.
Example 15-13 Backing Up the Control File for a CDB
The following ALTER DATABASE
statement uses a recovery_clause to back up a control file.
ALTER DATABASE BACKUP CONTROLFILE TO '+DATA/dbs/backup/control.bkp';
Example 15-14 Adding a Redo Log File to a CDB
The following ALTER DATABASE
statement uses a logfile_clause to add redo log files.
ALTER DATABASE cdb ADD LOGFILE
GROUP 4 ('/u01/logs/orcl/redo04a.log','/u02/logs/orcl/redo04b.log')
SIZE 100M BLOCKSIZE 512 REUSE;
See Also:
Setting the Undo Mode in a CDB Using ALTER DATABASE
When local undo is enabled, each container has its own undo tablespace for every instance in which it is open. When local undo is disabled, there is one undo tablespace for the entire CDB.
About the CDB Undo Mode
You can configure a CDB to use local undo in every container or to use shared undo (default) for the entire CDB.
A CDB runs either in local or shared undo mode. The undo mode applies to the entire CDB. Therefore, every container either uses shared undo or local undo.
You can specify the undo mode of a CDB during CDB creation in the ENABLE PLUGGABLE DATABASE
clause of the CREATE DATABASE
statement. If you do not specify the UNDO
clause, then shared undo mode is the default. You can change the undo mode of a CDB after it is created by issuing an ALTER DATABASE
statement and restarting the CDB.
SELECT PROPERTY_NAME, PROPERTY_VALUE
FROM DATABASE_PROPERTIES
WHERE PROPERTY_NAME = 'LOCAL_UNDO_ENABLED';
If the query returns TRUE
for the PROPERTY_VALUE
, then the CDB is in local undo mode. Otherwise, the CDB is in shared undo mode.
About Local Undo Mode
Local undo mode means that each container has its own undo tablespace for every instance in which it is open.
In this mode, Oracle Database automatically creates an undo tablespace for every container in the CDB. For an Oracle RAC CDB, there is one active undo tablespace for each instance for each PDB in local undo mode.
Local undo mode provides increased isolation for each container and improves the efficiency of some operations, such as unplugging the container or performing point-in-time recovery on the container. In addition, local undo mode is required for some operations to be supported, such as relocating a PDB or cloning a PDB that is in open read/write mode.
When a CDB is in local undo mode, the following applies:
-
Any user who has the appropriate privileges for the current container can create an undo tablespace for the container.
-
Undo tablespaces are visible in static data dictionary views and dynamic performance (V$) views in every container in the CDB.
See Also:
Oracle Database SQL Language Reference for information about the required privileges
About Shared Undo Mode
Shared undo mode means that only one active undo tablespace exists for a single-instance CDB. For an Oracle RAC CDB, there is one active undo tablespace for each instance.
When a CDB is in shared undo mode, the following applies:
-
Only a common user who has the appropriate privileges and whose current container is the CDB root can create an undo tablespace.
-
When the current container is not the CDB root, an attempt to create an undo tablespace fails and returns an error.
-
Undo tablespaces are visible in static data dictionary views and dynamic performance (V$) views when the current container is the CDB root. Undo tablespaces are visible only in dynamic performance views when the current container is a PDB, an application root, or an application PDB.
Note:
-
When you change the undo mode of a CDB, the new undo mode applies to an individual container the first time the container is opened after the change.
-
When you change the undo mode of a CDB, containers in the CDB cannot flash back to a time or SCN that is prior to the change.
Configuring a CDB to Use Local Undo Mode
You can change a CDB to local undo mode by issuing an ALTER DATABASE LOCAL UNDO ON
statement and restarting the database.
When a CDB is in local undo mode, each container has its own undo tablespace for every instance in which it is open. Oracle Database automatically creates an undo tablespace in any container in the CDB that does not have one. If a PDB without an undo tablespace is cloned, relocated, or plugged into a CDB that is configured to use local undo mode, then Oracle Database automatically creates an undo tablespace for the PDB the first time it is opened.
When a CDB is changed from shared undo mode to local undo mode, Oracle Database creates the required undo tablespaces automatically.
Configuring a CDB to Use Shared Undo Mode
To change a CDB to use shared undo mode, use an ALTER DATABASE LOCAL UNDO OFF
statement.
Modifying the CDB Root Using ALTER DATABASE
To modify only the root of a CDB, use the ALTER DATABASE
statement.
When the current container is the root, some ALTER DATABASE
statements modify the root without directly modifying any of the PDBs. See the "Modify Root Only" column of Table 15-3 for a list of these statements.
Some statements set the defaults for the PDBs in the CDB. You can overwrite these defaults for a PDB by using the ALTER PLUGGABLE DATABASE
statement.
Prerequisites
To modify the root, the current user must have the ALTER DATABASE
privilege in the root.
To modify the root:
-
In SQL*Plus, ensure that the current container is the root.
-
Run an
ALTER DATABASE
statement with a clause that modifies the root.
The following examples modify the root.
A user whose current container is the root that is not explicitly assigned a tablespace uses the default permanent tablespace for the root. The tablespace specified in the ALTER DATABASE
statement must exist in the root.
After executing this statement, the default type of subsequently created tablespaces in the root is bigfile. This setting is also the default for PDBs.
The tablespace or tablespace group specified in the ALTER DATABASE
statement must exist in the root.
Example 15-15 Changing the Default Permanent Tablespace for the Root
This ALTER DATABASE
statement uses a DEFAULT TABLESPACE
clause to set the default permanent tablespace to root_tbs
for the root.
ALTER DATABASE DEFAULT TABLESPACE root_tbs;
Example 15-16 Bringing a Data File Online for the Root
This ALTER DATABASE
statement uses a database_file_clause to bring the /u02/oracle/cdb_01.dbf data file online.
ALTER DATABASE DATAFILE '/u02/oracle/cdb_01.dbf' ONLINE;
Example 15-17 Changing the Default Tablespace Type for the Root
This ALTER DATABASE
statement uses a SET DEFAULT TABLESPACE
clause to change the default tablespace type to bigfile for the root.
ALTER DATABASE SET DEFAULT BIGFILE TABLESPACE;
Example 15-18 Changing the Default Temporary Tablespace for the Root
This ALTER DATABASE
statement uses a DEFAULT TEMPORARY TABLESPACE
clause to set the default temporary tablespace to root_temp
for the root.
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE root_temp;
Executing SQL in a Different Container
To execute SQL in a different container, use the CONTAINERS
clause for DML or the CONTAINER
clause for DDL.
Issuing DML Statements on a Container in a CDB
A DML (data manipulation language) statement issued in a CDB or application root can modify a different container in the CDB. In addition, you can specify a default container target for DML statements.
About Issuing DML Statements on a Container in a CDB
DML statements can affect database objects in a specified container in a CDB.
The container is specified by container ID. Because the container ID can appear in more than one location, the database uses the following order of precedence:
-
The
CON_ID
specified in theWHERE
clause of a DML statement -
The
CONTAINERS_DEFAULT_TARGET
database property -
The current container, which is either the CDB root or application root
In a CDB root or an application root, a DML statement that includes the CONTAINERS
clause can modify a table or view in a single container in the CDB or application container. To use the CONTAINERS
clause, specify the table or view being modified in the CONTAINERS
clause and the container ID affected in the WHERE
clause.
INSERT VALUES
statement by specifying a value for CON_ID
in the VALUES
clause. Also, you can specify a target container in an UPDATE
or DELETE
statement by specifying a CON_ID
predicate in the WHERE
clause. For example, the following DML statement updates the sales.customers
table in the container with a CON_ID
of 7
:UPDATE CONTAINERS(sales.customers) ctab
SET ctab.city_name='MIAMI'
WHERE ctab.CON_ID=7
AND CUSTOMER_ID=3425;
The following restrictions apply to the CONTAINERS
clause:
-
The specified schema must exist both in the container specified by
CON_ID
and in the CDB or application root where the statement is executed. -
The value specified for the
CON_ID
in theWHERE
clause must refer to a PDB, application root, or application PDB within the CDB. -
INSERT
asSELECT
statements where the target of theINSERT
is inCONTAINERS()
is not supported. -
A multitable
INSERT
statement where the target of theINSERT
is inCONTAINERS()
is not supported. -
DML statements using the
CONTAINERS
clause require that the database listener is configured using TCP (instead of IPC) and that thePORT
andHOST
values are specified for each target PDB using thePORT
andHOST
clauses, respectively.
Specifying the Default Container for DML Statements in a CDB
To specify the default container for DML statements in a CDB, issue the ALTER DATABASE
statement with the CONTAINERS DEFAULT TARGET
clause.
When a DML statement is issued in a CDB root without specifying containers in the WHERE
clause, the DML statement affects the default container for the CDB. The default container can be any container in the CDB, including the CDB root, a PDB, an application root, or an application PDB. Only one default container is allowed.
CONTAINERS_DEFAULT_TARGET
database property sets the default container. By default, this property is not set. You can determine the default target containers for a CDB by running the following query:SELECT PROPERTY_VALUE
FROM DATABASE_PROPERTIES
WHERE PROPERTY_NAME='CONTAINERS_DEFAULT_TARGET';
Example 15-19 Specifying the Default Container for DML Statements in a CDB
This example specifies that PDB1
is the default container for DML statements in the CDB.
ALTER DATABASE CONTAINERS DEFAULT TARGET = (PDB1);
Example 15-20 Clearing the Default Container
This example clears the default container setting. When it is not set, the default container is the CDB root.
ALTER DATABASE CONTAINERS DEFAULT TARGET = NONE;
Executing DDL Statements in a CDB
In a CDB, you can execute a data definition language (DDL) statement in the current container or in all containers.
About Executing DDL Statements in a CDB
In a CDB, some DDL statements can apply to all containers or to the current container only.
To specify which containers are affected, use the CONTAINER
clause:
CONTAINER = { CURRENT | ALL }
The following settings are possible:
-
CURRENT
means that the statement applies only to the current container. -
ALL
means that the statement applies to all containers in the CDB, including the root and all PDBs.
The following restrictions apply to the CONTAINER
clause in DDL statements:
-
The restrictions described in "About the Current Container".
-
You can use the
CONTAINER
clause only with the DDL statements listed in Table 15-4.
Table 15-4 DDL Statements and the CONTAINER Clause in a CDB
DDL Statement | CONTAINER = CURRENT | CONTAINER = ALL |
---|---|---|
|
Creates a local user in the current PDB. |
Creates a common user. |
|
Alters a local user in the current PDB. |
Alters a common user. |
|
Creates a local role in the current PDB. |
Creates a common role. |
|
Grants a privilege in the local container to a local user, common user, or local role. The |
Grants a system privilege or object privilege on a common object to a common user or common role. The specified privilege is granted to the user or role across the entire CDB. |
|
Revokes a privilege in the local container from a local user, common user, or local role. This statement can revoke only a privilege granted with The |
Revokes a system privilege or object privilege on a common object from a common user or common role. The specified privilege is revoked from the user or role across the entire CDB. This statement can revoke only a privilege granted with |
All other DDL statements apply to the current container only.
In addition to the usual rules for user, role, and profile names, the following rules and best practices apply when you create a user, role, or profile in a CDB:
-
It is best practice for common user, role, and profile names to start with a prefix to avoid naming conflicts between common users, roles, and profiles and local users, roles, and profiles. You specify this prefix with the
COMMON_USER_PREFIX
initialization parameter in the CDB root. By default, the prefix isC##
orc##
in the CDB root. -
In an application container, it is best practice for application common user, role, and profile names to start with a prefix to avoid naming conflicts between application common users, roles, and profiles and local users, roles, and profiles. You specify this prefix with the
COMMON_USER_PREFIX
initialization parameter in the application root. By default, the prefix isNULL
in an application root. -
When the
COMMON_USER_PREFIX
initialization parameter is set in an application root, the setting applies to the application common user, role, and profile names in the application container. The prefix can be different in the CDB root and in an application root, and the prefix can be different in different application containers. -
Common user, role, and profile names must consist only of ASCII characters. This restriction does not apply to application common user, role, and profile names.
-
Local user, role, and profile names cannot start with the prefix specified for common users with the
COMMON_USER_PREFIX
initialization parameter. -
Local user, role, and profile names cannot start with
C##
orc##
. -
Regardless of the value of
COMMON_USER_PREFIX
in the CDB root, application common user, role, and profile names cannot start withC##
orc##
. -
Application common user, role, and profile names cannot start with the prefix specified for common users with the
COMMON_USER_PREFIX
initialization parameter.
See Also:
-
"Modifying a CDB with ALTER SYSTEM" for information about using the
ALTER SYSTEM
statement in a CDB -
Oracle Database Security Guide for more information about managing users in a CDB
-
Oracle Database Reference for more information about the
COMMON_USER_PREFIX
initialization parameter
Executing a DDL Statement in the Current Container
Specify CURRENT
in the CONTAINER
clause of a DDL statement to execute the statement in the current container.
The supported DDL statements are listed in Table 15-4.
The current user must be granted the required privileges to execute the DDL statement in the current container. For example, to create a user, the current user must be granted the CREATE USER
system privilege in the current container.
To execute a DDL statement in the current container:
-
In SQL*Plus, access a container.
-
Execute the DDL statement with
CONTAINER
set toCURRENT
.
A local user's user name cannot start with the prefix specified by the COMMON_USER_PREFIX
initialization parameter. By default, in the CDB root, the prefix is C##
or c##
. An application root can specify its own prefix for an application container. In addition, a common user's name must consist only of ASCII characters. The specified tablespace must exist in the PDB.
Example 15-21 Creating Local User in a PDB
This example creates the local user testpdb
in the current PDB.
CREATE USER testpdb IDENTIFIED BY password
DEFAULT TABLESPACE pdb1_tbs
QUOTA UNLIMITED ON pdb1_tbs
CONTAINER = CURRENT;
Executing a DDL Statement in All Containers in a CDB
Specify ALL
in the CONTAINER
clause of a DDL statement to execute the statement in all containers in a CDB.
The supported DDL statements are listed in Table 15-4.
The following prerequisites must be met:
-
The current user must be a common user.
-
The current user must be granted the required privileges commonly to execute the DDL statement. For example, to create a user, the current user must be granted the
CREATE USER
system privilege commonly.
To execute a DDL statement in all containers in a CDB:
-
In SQL*Plus, ensure that the current container is the root.
-
Execute the DDL statement with
CONTAINER
set toALL
.
A common user's user name must start with the prefix specified by the COMMON_USER_PREFIX
initialization parameter. By default, in the CDB root, the prefix is C##
or c##
. An application root can specify its own prefix for an application container. In addition, a common user's name must consist only of ASCII characters. The specified tablespace must exist in the root and in all PDBs.
Example 15-22 Creating Common User in a CDB
This example creates the common user c##testcdb
.
CREATE USER c##testcdb IDENTIFIED BY password
DEFAULT TABLESPACE cdb_tbs
QUOTA UNLIMITED ON cdb_tbs
CONTAINER = ALL;
Running Oracle-Supplied SQL Scripts in a CDB
You can use the catcon.pl
script to run Oracle-supplied SQL or SQL scripts within a CDB. You can run the script against any specified containers.
About Running Oracle-Supplied SQL Scripts in a CDB
In a CDB, the catcon.pl
script is the best way to run SQL scripts and SQL statements.
An Oracle Database installation includes several SQL scripts. These scripts perform operations such as creating data dictionary views and installing options.
The catcon.pl
script can run scripts in the root and in specified PDBs in the correct order, and it generates log files that you can view to confirm that the SQL script or SQL statement did not generate unexpected errors. It also starts multiple processes and assigns new scripts to them as they finish running scripts previously assigned to them.
Note:
Unless you exclude the PDB seed when you run catcon.pl
, the SQL script or SQL statement is run on the PDB seed.
Syntax and Parameters for catcon.pl
The catcon.pl
script is a Perl script that must be run at an operating system prompt.
The catcon.pl
script has the following syntax and parameters:
$ORACLE_HOME/perl/bin/perl $ORACLE_HOME/rdbms/admin/catcon.pl
[--usr username[/password]]
[--int_usr username[/password]]
[--script_dir directory]
[--log_dir directory]
[{--incl_con|--excl_con} container]
[--echo]
[--spool]
[--error_logging { ON | errorlogging-table-other-than-SPERRORLOG } ]
[--app_con application_root]
[--no_set_errlog_ident]
[--diag]
[-ignore_unavailable_pdbs]
[--verbose]
[--force_pdb_mode pdb_mode]
[--num_procs number]
[--user_scripts]
[--recover]
--log_file_base log_file_name_base
-- { SQL_script [arguments] | --x'SQL_statement' }
Ensure that --x SQL_statement
is preceded by --
if it follows any single-letter parameter. If --x SQL_statement
is preceded by a script name or another --x SQL_statement
, then do not precede it with --
. Also, note that the SQL statement must be inside single quotation marks.
Command line parameters to SQL scripts can be introduced using --p
. Interactive (or secret) parameters to SQL scripts can be introduced using --P
.
To view the help for the catcon.pl
script, change directories to $ORACLE_HOME/perl/bin/
, and then run the following command:
perl $ORACLE_HOME/rdbms/admin/catcon.pl --help
The following table describes the catcon.pl
parameters. A parameter is optional unless it is indicated that it is required.
The short parameter names in the following table are for backward compatibility. Some parameters do not have short names.
Table 15-5 catcon.pl Parameters
Parameter | Short Name | Description |
---|---|---|
|
|
Specifies the user name and password to connect to the root and the specified PDBs. Specify a common user with the required privileges to run the SQL script or the SQL statement. The default is " |
|
|
Specifies the user name and password to connect to the root and the specified PDBs. Specify a common user with the required privileges to perform internal tasks, such as querying CDB metadata. The default is |
|
|
Directory that contains the SQL script. The default is the current directory. |
|
|
Directory into which |
|
|
The containers in which the SQL script is run or is not run. The The Specify containers in a space-delimited list of PDB names enclosed in single quotation marks. The When this parameter is used, the |
|
|
Sets echo |
|
|
Spools the output of every script into a file with the following name:
|
|
|
When set to When a table other than See SQL*Plus User's Guide and Reference for more information about the error logging table. |
|
|
Specify an application root. The scripts are run in the application root and in the application PDBs that are plugged into the application root. When this parameter is used, the |
|
|
Do not issue a |
|
|
Turns on the generation of debugging information. |
|
|
Turns on verbose output. |
|
|
Ignore PDBs that are closed or, if the When this option is not specified and some specified PDBs do not exist or are not open, an error is returned and none of the containers are processed. |
|
n/a |
The required open mode for all PDBs against which the scripts are run. Specify one of the following values:
When a value other than When |
|
|
Specifies how many SQL*Plus processes
|
|
|
Specifies that all scripts and/or statements supplied by the caller
will not run in |
|
|
Causes |
|
|
(Required) The base name for log file names. |
Running the catcon.pl Script
Examples illustrate running the catcon.pl
script.
If a SQL script or SQL statement run by catcon.pl
performs data manipulation language (DML) or data definition language (DDL) operations, then the containers being modified must be in read/write mode.
To run the catcon.pl script:
-
Open a command line prompt.
-
Run the
catcon.pl
script and specify one or more SQL scripts or SQL statements:cd $ORACLE_HOME/perl/bin/ perl $ORACLE_HOME/rdbms/admin/catcon.pl parameters SQL_script perl $ORACLE_HOME/rdbms/admin/catcon.pl parameters -- --xSQL_statement
Example 15-23 Running the catblock.sql Script in All Containers in a CDB
The following example runs the catblock.sql
script in all of the containers of a CDB (the backslash indicates line continuation):
$ORACLE_HOME/perl/bin/perl $ORACLE_HOME/rdbms/admin/catcon.pl \
--usr SYS --script_dir $ORACLE_HOME/rdbms/admin \
--log_file_base catblock_output catblock.sql
The following parameters are specified:
-
The
--usr
parameter specifies thatSYS
user runs the script in each container. -
The
--script_dir
parameter specifies that the SQL script is in the$ORACLE_HOME/rdbms/admin
directory. -
The
--log_file_base
parameter specifies that the base name for log file names iscatblock_output
.
Default parameter values are used for all other parameters. Neither the --incl_con
nor the --excl_con
parameter is specified. Therefore, catcon.pl runs the script in all containers by default.
Example 15-24 Running the catblock.sql Script in Specific PDBs
The following example runs the catblock.sql
script in the hrpdb
and salespdb
PDBs in a CDB.
$ORACLE_HOME/perl/bin/perl $ORACLE_HOME/rdbms/admin/catcon.pl \
--usr SYS --int_usr SYS --script_dir $ORACLE_HOME/rdbms/admin \
--log_dir '/disk1/script_output' --incl_con 'HRPDB SALESPDB' \
--log_file_base catblock_output catblock.sql
The following parameters are specified:
-
The
--usr
parameter specifies thatSYS
user runs the script in each container. -
The
--int_usr
parameter specifies thatSYS
user performs internal tasks. -
The
--script_dir
parameter specifies that the SQL script is in the$ORACLE_HOME/rdbms/admin
directory. -
The
--log_dir
parameter specifies that the output files are placed in the/disk1/script_output
directory. -
The
--incl_con
parameter specifies that the SQL script is run in thehrpdb
andsalespdb
PDBs. The script is not run in any other containers in the CDB. -
The
--log_file_base
parameter specifies that the base name for log file names iscatblock_output
.
Example 15-25 Running the catblock.sql Script in All Containers Except for Specific PDBs
The following example runs the catblock.sql
script in all of the containers in a CDB except for the hrpdb
and salespdb
PDBs.
$ORACLE_HOME/perl/bin/perl $ORACLE_HOME/rdbms/admin/catcon.pl \
--usr SYS --script_dir $ORACLE_HOME/rdbms/admin \
--log_dir '/disk1/script_output' --excl_con 'HRPDB SALESPDB' \
--log_file_base catblock_output catblock.sql
The following parameters are specified:
-
The
--usr
parameter specifies thatSYS
user runs the script in each container. -
The
--script_dir
parameter specifies that the SQL script is in the$ORACLE_HOME/rdbms/admin
directory. -
The
--log_dir
parameter specifies that the output files are placed in the/disk1/script_output
directory. -
The
--excl_con
parameter specifies that the SQL script is run in all of the containers in the CDB except for thehrpdb
andsalespdb
PDBs. -
The
--log_file_base
parameter specifies that the base name for log file names iscatblock_output
.
Example 15-26 Running a SQL Script with Command Line Parameters
The following example runs the custom_script.sql
script in all of the containers of a CDB.
cd $ORACLE_HOME/perl/bin/
perl $ORACLE_HOME/rdbms/admin/catcon.pl --usr SYS --script_dir /u01/scripts \
--log_file_base custom_script_output custom_script.sql '--phr' \
'--PEnter password for user hr:'
The following parameters are specified:
-
The
--usr
parameter specifies thatSYS
user runs the script in each container. -
The
--script_dir
parameter specifies that the SQL script is in the /u01/scripts directory. -
The
--log_file_base
parameter specifies that the base name for log file names iscustom_script_output
. -
The
--p
parameter specifieshr
for a command line parameter -
The
--P
parameter specifies an interactive parameter that prompts for the password of userhr
.
Default parameter values are used for all other parameters. Neither the -incl_con
nor the -excl_con
parameter is specified. Therefore, catcon.pl runs the script in all containers by default.
Example 15-27 Running a SQL Statement in All Containers in a CDB
The following example runs a SQL statement in all of the containers of a CDB.
cd $ORACLE_HOME/perl/bin/
perl $ORACLE_HOME/rdbms/admin/catcon.pl --usr SYS --echo \
--log_file_base select_output -- --x"SELECT * FROM DUAL"
The following parameters are specified:
-
The
--usr
parameter specifies thatSYS
user runs the script in each container. -
The
--echo
parameter shows output for the SQL statement. -
The
--log_file_base
parameter specifies that the base name for log file names isselect_output
. -
The SQL statement
SELECT * FROM DUAL
is inside quotation marks and is preceded by--x
. Because--x
is preceded by a parameter (--log_file_base
), it must be preceded by--
.
Default parameter values are used for all other parameters. Neither the -incl_con
nor the -excl_con
parameter is specified. Therefore, catcon.pl runs the SQL statement in all containers by default.
See Also:
-
Oracle Database Administrator’s Guide for information about the
catblock.sql
script -
Oracle Database SQL Language Reference for more information about SQL scripts
Executing Code in Containers Using the DBMS_SQL Package
When you are executing PL/SQL code in a container in a CDB, and you want to execute one or more SQL statements in a different container, use the DBMS_SQL
package to switch containers.
For example, you can use the DBMS_SQL
package to switch containers when you need to perform identical actions in more than one container.
The following are considerations for using DBMS_SQL
to switch containers:
-
A transaction cannot span multiple containers.
If the set of actions you must perform in the target container requires a transaction, then consider using an autonomous transaction and perform a commit or rollback as the last action.
-
SET
ROLE
statements are not allowed.
Example 15-28 Performing Identical Actions in More Than One Container
This example includes a PL/SQL block that creates the identact
table in the hr
schema in two PDBs (pdb1
and pdb2
). The example also inserts a row into the identact
table in both PDBs.
DECLARE
c1 INTEGER;
rowcount INTEGER;
taskList VARCHAR2(32767) :=
'DECLARE
PRAGMA AUTONOMOUS TRANSACTION;
BEGIN
-- Create the hr.identact table.
EXECUTE IMMEDIATE
''CREATE TABLE hr.identact
(actionno NUMBER(4) NOT NULL,
action VARCHAR2 (10))'';
EXECUTE IMMEDIATE
''INSERT INTO identact VALUES(1, 'ACTION1')'';
-- A commit is required if the tasks include DML.
COMMIT;
EXCEPTION
WHEN OTHERS THEN
-- If there are errors, then drop the table.
BEGIN
EXECUTE IMMEDIATE ''DROP TABLE identact'';
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
END;';
TYPE containerListType IS TABLE OF VARCHAR2(128) INDEX BY PLS_INTEGER;
containerList containerListType;
BEGIN
containerList(1) := 'PDB1';
containerList(2) := 'PDB2';
c1 := DBMS_SQL.OPEN_CURSOR;
FOR conIndex IN containerList.first..containerList.last LOOP
DBMS_OUTPUT.PUT_LINE('Creating in container: ' || containerList(conIndex));
DBMS_SQL.PARSE(
c => c1 ,
statement => taskList,
language_flag => DBMS_SQL.NATIVE,
edition => NULL,
apply_crossedition_trigger => NULL,
fire_apply_trigger => NULL,
schema => 'HR',
container => containerList(conIndex));
rowcount := DBMS_SQL.EXECUTE(c=>c1);
END LOOP;
DBMS_SQL.CLOSE_CURSOR(c=>c1);
END;
/
See Also:
-
Oracle Database PL/SQL Packages and Types Reference for more information about the
DBMS_SQL
package -
Oracle Database PL/SQL Language Reference for more information about autonomous transactions
Monitoring Containers in a CDB
You can view metadata about CDBs, PDBs, and application containers using SQL*Plus or SQL Developer.
Related Topics
About CDB and Container Information in Views
In a CDB, the metadata for data dictionary tables and view definitions is stored only in the root.
Each container, including each PDB, application root, and application PDB, has its own set of data dictionary tables and views for the objects contained in the container. Because each container can contain different data and schema objects, containers can display different metadata in data dictionary views, even when querying the same view in each container. For example, metadata about tables displayed in the DBA_TABLES
view can be different in two different containers because the containers can contain different tables. An internal mechanism called a metadata link enables a container to access the metadata for these views in the root.
If a dictionary table stores information that pertains to the whole CDB, instead of for each container, then the metadata and the data displayed in a data dictionary view are stored in the root. For example, Automatic Workload Repository (AWR) data can be stored in the root, and this data is displayed in some data dictionary views, such as the DBA_HIST_ACTIVE_SESS_HISTORY
view. An internal mechanism called a data link enables a container to access both the metadata and the data for these types of views in the root.
See Also:
Oracle Database Concepts for more information about dictionary access in containers, metadata links, and data links
About Viewing Information When the Current Container Is Not the CDB Root
When the current container is a PDB, an application root, or an application PDB, the data dictionary views show metadata for the current container only.
Also, in a container that is not the CDB root, CDB_
views only show information about database objects visible through the corresponding DBA_
view.
About Viewing Information When the Current Container Is the CDB Root
When the current container is the CDB root, a common user can view data dictionary information for the CDB root and for PDBs, application roots, and application PDBs by querying container data objects.
A container data object is a table or view that can contain data pertaining to the following:
-
One or more containers
-
The CDB as a whole
-
One or more containers and the CDB as a whole
Container data objects include V$
, GV$
, CDB_
, and some Automatic Workload Repository DBA_HIST*
views. A common user's CONTAINER_DATA
attribute determines which containers are visible in container data objects.
In a CDB, for every DBA_
view, there is a corresponding CDB_
view. All CDB_
views are container data objects, but most DBA_
views are not.
Each container data object contains a CON_ID
column that identifies the container for each row returned. Table 15-6 describes the meanings of the values in the CON_ID
column.
Table 15-6 CON_ID Column in Container Data Objects
Value in CON_ID Column | Description |
---|---|
0 |
The data pertains to the entire CDB |
1 |
The data pertains to the CDB root |
2 |
The data pertains to the PDB seed |
3 - 4,098 |
The data pertains to a PDB, an application root, or an application PDB Each container has its own container ID. |
The following views behave differently from other [G]V$
views:
-
[G]V$SYSSTAT
-
[G]V$SYS_TIME_MODEL
-
[G]V$SYSTEM_EVENT
-
[G]V$SYSTEM_WAIT_CLASS
When queried from the CDB root, these views return instance-wide data, with 0
in the CON_ID
column for each row returned. However, you can query equivalent views that behave the same as other container data objects. The following views can return specific data for each container in a CDB: [G]V$CON_SYSSTAT
, [G]V$CON_SYS_TIME_MODEL
, [G]V$CON_SYSTEM_EVENT
, and [G]V$CON_SYSTEM_WAIT_CLASS
.
Note:
-
When querying a container data object, the data returned depends on whether containers are open and on the privileges granted to the user running the query.
-
In an Oracle Real Application Clusters (Oracle RAC) environment, the data returned by container data objects might vary based on the instance to which a session is connected.
-
When a container is opened in restricted mode, it is ignored in queries on
CDB_
views.
See Also:
-
Oracle Database Security Guide for detailed information about container data objects
Views for a CDB
You can query a set of views for information about a CDB and its PDBs.
Table 15-7 describes data dictionary views that are useful for monitoring a CDB and its PDBs.
Table 15-7 Views for a CDB
View | Description | More Information |
---|---|---|
Container data objects, including:
|
Container data objects can display information about multiple PDBs. Each container data object includes a There is a |
|
|
Displays information about the PDBs associated with the CDB, including the status of each PDB. |
|
|
Displays the permanent properties of each container in a CDB. |
|
|
Displays the history of each PDB. |
|
|
Displays information about the user-level and object-level |
|
|
Displays the PDBs and instances in the Workload Repository. |
|
|
Displays information about the current saved PDB states in the CDB. |
"Preserving or Discarding the Open Mode of PDBs When the CDB Restarts" |
|
Describes all applications in an application container. |
|
|
Describes all statements from application installation, upgrade, and patch operations in an application container. |
|
|
Describes all application patches in an application container. |
|
|
Describes all application error messages generated in an application container. |
|
|
Displays information about all the CDB resource plans. |
|
|
Displays information about all the CDB resource plan directives. |
|
|
Contains descriptions of reasons for PDB alerts. |
|
|
Displays information about incompatibilities between a PDB and the CDB to which it belongs. This view is also used to display information generated by executing |
|
|
Displays information about database objects, and the |
|
|
Displays information about database services, and the |
|
|
The |
|
|
The |
|
|
The |
|
|
The |
|
|
Displays information about the database from the control file. If the database is a CDB, then CDB-related information is included. |
|
|
Displays information about the containers associated with the current CDB, including the root and all PDBs. |
|
|
Displays information about the PDBs associated with the current CDB, including the open mode of each PDB. |
|
|
Displays information about all PDB incarnations. Oracle creates a new PDB incarnation whenever a PDB is opened with the |
|
|
Displays information about initialization parameters, and the |
|
|
Displays trace file and alert file data for the current container in a CDB. |
|
|
Displays information about problems and incidents for the current container in a CDB. |
Viewing Information About the Containers in a CDB
The V$CONTAINERS
view provides information about all containers in a CDB, including the root and all PDBs.
To view this information, the query must be run by a common user whose current container is the root. When the current container is a PDB, this view only shows information about the current PDB.
To view information about the containers in a CDB:
-
In SQL*Plus, ensure that the current container is the root.
-
Query the
V$CONTAINERS
view.
Example 15-29 Viewing Identifying Information About Each Container in a CDB
COLUMN NAME FORMAT A8
SELECT NAME, CON_ID, DBID, CON_UID, GUID FROM V$CONTAINERS ORDER BY CON_ID;
Sample output:
NAME CON_ID DBID CON_UID GUID
-------- ---------- ---------- ---------- --------------------------------
CDB$ROOT 1 659189539 1 C091A6F89C7572A1E0436797E40AC78D
PDB$SEED 2 4026479912 4026479912 C091AE9C00377591E0436797E40AC138
HRPDB 3 3718888687 3718888687 C091B6B3B53E7834E0436797E40A9040
SALESPDB 4 2228741407 2228741407 C091FA64EF8F0577E0436797E40ABE9F
Viewing Information About PDBs
The CDB_PDBS
view and DBA_PDBS
view provide information about the PDBs associated with a CDB, including the status of each PDB.
To view this information, the query must be run by a common user whose current container is the root. When the current container is a PDB, all queries on these views return no results.
To view information about PDBs:
-
In SQL*Plus, ensure that the current container is the root.
-
Query the
CDB_PDBS
orDBA_PDBS
view.
Example 15-30 Viewing Container ID, Name, and Status of Each PDB
COLUMN PDB_NAME FORMAT A15 SELECT PDB_ID, PDB_NAME, STATUS FROM DBA_PDBS ORDER BY PDB_ID;
Sample output:
PDB_ID PDB_NAME STATUS ---------- --------------- ------------- 2 PDB$SEED NORMAL 3 HRPDB NORMAL 4 SALESPDB NORMAL
See Also:
Viewing the Open Mode of Each PDB
The V$PDBS
view provides information about the PDBs associated with the current database instance.
You can query this view to determine the open mode of each PDB. For each PDB that is open, this view can also show when the PDB was last opened. A common user can query this view when the current container is the root or a PDB. When the current container is a PDB, this view only shows information about the current PDB.
To view the open status of each PDB:
-
In SQL*Plus, access a container.
-
Query the
V$PDBS
view.
Example 15-31 Viewing the Name and Open Mode of Each PDB
COLUMN NAME FORMAT A15 COLUMN RESTRICTED FORMAT A10 COLUMN OPEN_TIME FORMAT A30 SELECT NAME, OPEN_MODE, RESTRICTED, OPEN_TIME FROM V$PDBS;
Sample output:
NAME OPEN_MODE RESTRICTED OPEN_TIME --------------- ---------- ---------- ------------------------------ PDB$SEED READ ONLY NO 21-MAY-12 12.19.54.465 PM HRPDB READ WRITE NO 21-MAY-12 12.34.05.078 PM SALESPDB MOUNTED NO 22-MAY-12 10.37.20.534 AM
Querying Container Data Objects
In the root, container data objects can show information about database objects (such as tables and users) contained in the root and in PDBs. Access to PDB information is controlled by the common user's CONTAINER_DATA
attribute.
For example, CDB_
views are container data objects. See "About Viewing Information When the Current Container Is the CDB Root" and Oracle Database Security Guide for more information about container data objects.
Each container data object contains a CON_ID
column that shows the container ID of each PDB in the query results. You can view the PDB name for a container ID by querying the DBA_PDBS
view.
To use container data objects to show information about multiple PDBs:
-
In SQL*Plus, ensure that the current container is the root.
-
Query the container data object to show the desired information.
Note:
When a query contains a join of a container data object and a non-container data object, and the current container is the root, the query returns data for the entire CDB only (CON_ID
= 0
).
Example 15-32 Showing the Tables Owned by Specific Schemas in Multiple PDBs
This example queries the DBA_PDBS
view and the CDB_TABLES
view from the root to show the tables owned by hr
user and oe
user in the PDBs associated with the CDB. This query returns only rows where the PDB has an ID greater than 2 (p.PDB_ID > 2
) to avoid showing the users in the CDB root and PDB seed.
COLUMN PDB_NAME FORMAT A15
COLUMN OWNER FORMAT A15
COLUMN TABLE_NAME FORMAT A30
SELECT p.PDB_ID, p.PDB_NAME, t.OWNER, t.TABLE_NAME
FROM DBA_PDBS p, CDB_TABLES t
WHERE p.PDB_ID > 2 AND
t.OWNER IN('HR','OE') AND
p.PDB_ID = t.CON_ID
ORDER BY p.PDB_ID;
Sample output:
PDB_ID PDB_NAME OWNER TABLE_NAME
---------- --------------- --------------- ------------------------------
3 HRPDB HR COUNTRIES
3 HRPDB HR JOB_HISTORY
3 HRPDB HR EMPLOYEES
3 HRPDB HR JOBS
3 HRPDB HR DEPARTMENTS
3 HRPDB HR LOCATIONS
3 HRPDB HR REGIONS
4 SALESPDB OE PRODUCT_INFORMATION
4 SALESPDB OE INVENTORIES
4 SALESPDB OE ORDERS
4 SALESPDB OE ORDER_ITEMS
4 SALESPDB OE WAREHOUSES
4 SALESPDB OE CUSTOMERS
4 SALESPDB OE SUBCATEGORY_REF_LIST_NESTEDTAB
4 SALESPDB OE PRODUCT_REF_LIST_NESTEDTAB
4 SALESPDB OE PROMOTIONS
4 SALESPDB OE PRODUCT_DESCRIPTIONS
This sample output shows the PDB hrpdb
has tables in the hr
schema and the PDB salespdb
has tables in the oe
schema.
Example 15-33 Showing the Users in Multiple PDBs
This example queries the DBA_PDBS
view and the CDB_USERS
view from the root to show the users in each PDB. The query uses p.PDB_ID > 2
to avoid showing the users in the CDB root and the PDB seed.
COLUMN PDB_NAME FORMAT A15
COLUMN USERNAME FORMAT A30
SELECT p.PDB_ID, p.PDB_NAME, u.USERNAME
FROM DBA_PDBS p, CDB_USERS u
WHERE p.PDB_ID > 2 AND
p.PDB_ID = u.CON_ID
ORDER BY p.PDB_ID;
Sample output:
PDB_ID PDB_NAME USERNAME
---------- --------------- ------------------------------
.
.
.
3 HRPDB HR
3 HRPDB OLAPSYS
3 HRPDB MDSYS
3 HRPDB ORDSYS
.
.
.
4 SALESPDB OE
4 SALESPDB CTXSYS
4 SALESPDB MDSYS
4 SALESPDB EXFSYS
4 SALESPDB OLAPSYS
.
.
.
Example 15-34 Showing the Data Files for Each PDB in a CDB
This example queries the DBA_PDBS
and CDB_DATA_FILES
views to show the name and location of each data file for all of the PDBs in a CDB, including the PDB seed.
COLUMN PID FORMAT 999
COLUMN PDB_NAME FORMAT A8
COLUMN FILE_ID FORMAT 9999
COLUMN TABLESPACE_NAME FORMAT A10
COLUMN FILE_NAME FORMAT A45
SELECT p.PDB_ID AS PID, p.PDB_NAME, d.FILE_ID, d.TABLESPACE_NAME, d.FILE_NAME
FROM DBA_PDBS p, CDB_DATA_FILES d
WHERE p.PDB_ID = d.CON_ID
ORDER BY p.PDB_ID;
Sample output:
PID PDB_NAME FILE_ID TABLESPACE FILE_NAME
--- -------- ------- ---------- ----------------------------------------
2 PDB$SEED 6 SYSAUX /disk1/oracle/dbs/pdbseed/cdb1_ax.f
2 PDB$SEED 5 SYSTEM /disk1/oracle/dbs/pdbseed/cdb1_db.f
3 HRPDB 9 SYSAUX /disk1/oracle/dbs/hrpdb/hrpdb_ax.f
3 HRPDB 8 SYSTEM /disk1/oracle/dbs/hrpdb/hrpdb_db.f
3 HRPDB 13 USER /disk1/oracle/dbs/hrpdb/hrpdb_usr.dbf
4 SALESPDB 15 SYSTEM /disk1/oracle/dbs/salespdb/salespdb_db.f
4 SALESPDB 16 SYSAUX /disk1/oracle/dbs/salespdb/salespdb_ax.f
4 SALESPDB 18 USER /disk1/oracle/dbs/salespdb/salespdb_usr.dbf
Example 15-35 Showing the Temp Files in a CDB
This example queries the CDB_TEMP_FILES
view to show the name and location of each temp file in a CDB, as well as the tablespace that uses the temp file.
COLUMN CON_ID FORMAT 999
COLUMN FILE_ID FORMAT 9999
COLUMN TABLESPACE_NAME FORMAT A15
COLUMN FILE_NAME FORMAT A45
SELECT CON_ID, FILE_ID, TABLESPACE_NAME, FILE_NAME
FROM CDB_TEMP_FILES
ORDER BY CON_ID;
Sample output:
CON_ID FILE_ID TABLESPACE_NAM FILE_NAME
------ ------- -------------- ---------------------------------------------
1 1 TEMP /disk1/oracle/dbs/t_tmp1.f
2 2 TEMP /disk1/oracle/dbs/pdbseed/t_tmp1.f
3 3 TEMP /disk1/oracle/dbs/hrpdb/t_hrpdb_tmp1.f
4 4 TEMP /disk1/oracle/dbs/salespdb/t_salespdb_tmp1.f
Example 15-36 Showing the Services Associated with PDBs
This example queries the CDB_SERVICES
view to show the PDB name, network name, and container ID of each service associated with a PDB.
COLUMN NETWORK_NAME FORMAT A30
COLUMN PDB FORMAT A15
COLUMN CON_ID FORMAT 999
SELECT PDB, NETWORK_NAME, CON_ID FROM CDB_SERVICES
WHERE PDB IS NOT NULL AND
CON_ID > 2
ORDER BY PDB;
Sample output:
PDB NETWORK_NAME CON_ID
--------------- ------------------------------ ------
HRPDB hrpdb.example.com 3
SALESPDB salespdb.example.com 4
See Also:
-
Oracle Database Security Guide for detailed information about container data objects
Querying Across Containers with the CONTAINERS Clause
The CONTAINERS
clause enables you to query tables and views across all containers in a CDB. It also enables you to query application common objects across all containers in an application container.
About Querying Across Containers with the CONTAINERS Clause
The CONTAINERS
clause enables you to query across containers in a CDB.
The CONTAINERS
clause enables you to query user-created tables and views across all containers in a CDB. This clause enables queries from the CDB root to display data in tables or views that exist in all open containers in a CDB.
The CONTAINERS
clause also enables you to query application
common objects, such as tables and views, across all application PDBs in an application
container. This clause enables queries from the application root to display data in
tables or views that exist in all open application PDBs in the application
container.
CONTAINERS
clause exposes three implicitly generated columns:
CON_ID
: The ID of the container from which the row is retrieved.CON$NAME
: The name of the container from which the row is retrieved. This is a hidden column.CDB$NAME
: The name of the CDB from which the row is retrieved. In the absence of a proxy PDB or a CDB fleet, all rows will have the same value forCDB$NAME
. This is a hidden column.
When the CONTAINERS
clause is evaluated, each container is treated as a
partition; therefore, the plan output for a query using the CONTAINERS
clause includes a partition iterator. Partition pruning can be used to restrict the set
of containers that is accessed during query execution. The pruning predicate may be
specified either on the CON_ID
column or the CON$NAME
column, both of which are implicitly generated for a CONTAINERS
clause.
Evaluation of the CONTAINERS
clause makes use of parallel execution
processes. Each container is assigned to a parallel execution process (P00*) and the
process switches into the container to execute a recursive SQL statement on the base
table or view. The base table or view is the object whose name is passed as an argument
to the CONTAINERS
clause.
The CONTAINERS_PARALLEL_DEGREE
initialization parameter can control the degree of parallelism of a query involving the CONTAINERS
clause. If the value of CONTAINERS_PARALLEL_DEGREE
is lower than 65535
(the default), then the specified value is used.
CONTAINERS_PARALLEL_DEGREE
initialization parameter is set to the default value (65535
), queries that use the CONTAINERS
clause are parallel by default. The default degree of parallelism is calculated with the following formula:max(min(cpu_count,number_of_open_containers),#instances)
In addition, you can pass a DEFAULT_PDB_HINT
hint in the CONTAINERS
clause. The hint is passed in the query that is run in each container.
The columns accessed by the recursive SQL statement are determined by the columns of the
CONTAINERS
clause accessed in the query. Predicates in the query
using the CONTAINERS
clause may be pushed down to the recursive SQL and
evaluated within each container, significantly reducing the number of rows that need to
be processed as a post filter on the CONTAINERS
clause.
You can force the recursive SQL that results from a query that includes the CONTAINERS
clause to be parallel by using the DEFAULT_PDB_HINT
clause of a CONTAINERS
hint or by using automatic degree of parallelism. However, parallel statement queuing is not possible for recursive SQL that results from a query that includes the CONTAINERS
clause.
Columns of the following types are removed if they exist in a table specified in a CONTAINERS
clause:
-
The following user-defined types: object types, varrays, REFs, and nested tables
-
The following Oracle-supplied types:
ANYTYPE
,ANYDATASET
, URI types,SDO_TOPO_GEOMETRY
,SDO_GEORASTER
, andExpression
Note:
-
When a container is opened in restricted mode, it is ignored by the
CONTAINERS
clause. -
When the
CONTAINERS
clause is used and an error is returned by a container, the query does not return results from the container that raised the error, and the error is not returned. For example, you cannot select aBFILE
column from a remote table into a local variable. If a query that does this uses theCONTAINERS
clause and includes local and remote containers, then the query returns results for the local containers, but not the remote containers, and no error is returned.
See Also:
-
Oracle Database SQL Language Reference for more information about the
CONTAINERS
clause and theCONTAINERS
hint -
Oracle Database Security Guide for detailed information about container data objects
-
Oracle Database Reference for more information about the
CONTAINERS_PARALLEL_DEGREE
initialization parameter -
Oracle Database Data Warehousing Guide for more information about automatic degree of parallelism and parallel statement queuing
Querying User-Created Tables and Views Across All Containers
The CONTAINERS
clause enables you to query user-created tables and views across all containers. This clause enables queries from the CDB root to display data in tables or views that exist in all open PDBs in a CDB.
Prerequisites
The tables and views, or synonyms of them, specified in the CONTAINERS
clause must exist in the CDB root and in all other containers.
To use the CONTAINERS
clause to query tables and views across all containers:
-
In SQL*Plus, access a container.
To view data in multiple containers, ensure that the current container is the CDB root.
-
Run a query that includes the
CONTAINERS
clause.
Example 15-37 Querying a Table Owned by a Common User Across All Containers
This example makes the following assumptions:
-
An organization has several PDBs, and each PDB is for a different department in the organization.
-
Each PDB has an
employees
table that tracks the employees in the department, but the table in each PDB contains different employees. -
The CDB root also has an empty
employees
table. -
The
employees
table in each container is owned by the same common user.
With the CDB root as the current container and the common user that owns the table as the current user, run the following query with the CONTAINERS
clause to return all employees in the employees
table in all PDBs:
SELECT * FROM CONTAINERS(employees);
Example 15-38 Querying a Table Owned by Local Users Across All Containers
This example makes the following assumptions:
-
An organization has several PDBs, and each PDB is for a different department in the organization.
-
Each PDB has an
hr.employees
table that tracks the employees in the department, but the table in each PDB contains different employees. -
The CDB root also has an empty
employees
table owned by a common user.
To run a query that returns all employees in all PDBs, first connect to each PDB as a common user, and create a view with the following statement:
CREATE OR REPLACE VIEW employees AS SELECT * FROM hr.employees;
The common user that owns the view must be the same common user that owns the employees
table in the CDB root. After you run this statement in each PDB, the common user has a view named employees
in each PDB.
With the CDB root as the current container and the common user as the current user, run the following query with the CONTAINERS
clause to return all employees in the hr.employees
table in all PDBs:
SELECT * FROM CONTAINERS(employees);
You can also query the view in specific containers. For example, the following SQL statement queries the view in the containers with a CON_ID
of 3
and 4
:
SELECT * FROM CONTAINERS(employees) WHERE CON_ID IN(3,4);
Note:
You can also use the CONTAINERS
clause to query Oracle-supplied tables and views. When running the query, ensure that the current user is the owner of the table or view, or create a view using the CONTAINERS
clause and grant SELECT
privilege on the view to the appropriate users.
See Also:
-
Oracle Database SQL Language Reference for more information about the
CONTAINERS
clause -
Oracle Database Security Guide for detailed information about container data objects
Querying Application Common Objects Across Application PDBs
The CONTAINERS
clause enables you to query application common objects across all PDBs in an application container. Queries from the application root display data in objects that exist in all open PDBs in the container.
The CONTAINERS
clause is most useful for metadata-linked application common objects. With metadata-linked application common objects, the structure is the same in all containers in an application container, but the data is different. You can use the CONTAINERS
clause to view the data in a metadata-linked application common object in multiple application PDBs. The benefits are similar for extended data-linked objects. The CONTAINERS
clause uses parallel execution to execute the query across the distinct application PDBs hosted in the application root.
To use the CONTAINERS
clause to query tables and views across all application PDBs:
-
In SQL*Plus, access the application root.
-
Run a query that includes the
CONTAINERS
clause.
Note:
You can enable theCONTAINERS_DEFAULT
attribute for a table or view in an application root. When this attribute is enabled, the CONTAINERS
clause is used for queries and DML statements on the database object by default, and the CONTAINERS
clause is not required in the SQL statements. To enable the CONTAINERS_DEFAULT
attribute for a table or view in an application root, run the ALTER TABLE
or CREATE OR REPLACE VIEW
statement with the ENABLE CONTAINERS_DEFAULT
clause.
Example 15-39 Querying an Application Common Object Across All Application PDBs
This example makes the following assumptions:
-
An organization has several application PDBs, and each application PDB is for a different department in the organization.
-
Each application PDB has an
employees
table that tracks the employees in the department, but the table in each application PDB contains different employees. -
The application root also has an empty
employees
table. -
The employees table in each container is owned by the same common user.
-
A company has multiple tenants that use an application in an application container, and each tenant has its own application PDB.
-
The company uses metadata-linked application common objects to keep the structure of the data the same in all application PDBs, but the data is different in each application PDB.
-
Each application PDB has a metadata-linked
sales.customers
table that stores information about each tenant’s customers.
With the application root as the current container and the application common user that owns the table as the current user, run the following query with the CONTAINERS
clause to return all customers in the sales.customers
table in all application PDBs:
SELECT * FROM CONTAINERS(sales.customers);
See Also:
-
Oracle Database SQL Language Reference for more information about the
CONTAINERS
clause -
Oracle Database Security Guide for detailed information about container data objects
Determining the Current Container ID or Name
You can determine your current container ID or container name in a CDB.
To determine the current container ID:
-
Run the following SQL*Plus command:
SHOW CON_ID
To determine the current container name:
-
Run the following SQL*Plus command:
SHOW CON_NAME
In addition, you can use the functions listed in Table 15-8 to determine the container ID, container name, DBID, GUID, and UID of a container.
Table 15-8 Functions That Return Container Information
Function | Description |
---|---|
|
Returns the container ID based on the container's name. |
|
Returns the container ID based on the container's DBID. |
|
Returns the container ID based on the container's unique identifier (UID). |
|
Returns the container ID based on the container's globally unique identifier (GUID). |
|
Returns the container name based on the container ID. |
|
Returns the container's DBID based on the container ID. |
|
Returns the container's globally unique identifier (GUID) based on the container ID. |
|
Returns the container’s unique identifier (UID) based on the container ID. |
The V$CONTAINERS
view shows the name, DBID, UID, and GUID for each container in a CDB.
Example 15-40 Returning the Container ID Based on the Container Name
SELECT CON_NAME_TO_ID('HRPDB') FROM DUAL;
Example 15-41 Returning the Container ID Based on the Container DBID
SELECT CON_DBID_TO_ID(2226957846) FROM DUAL;
Example 15-42 Returning the Container Name Based on the Container ID
SELECT CON_ID_TO_CON_NAME(4) FROM DUAL;
See Also:
-
Oracle Database Reference for more information about the
V$CONTAINERS
view
Listing the Modifiable Initialization Parameters in PDBs
In a CDB, some initialization parameters apply to the root and to all PDBs. When such an initialization parameter is changed, it affects the entire CDB. You can set other initialization parameters to different values in each container.
For example, you might have a parameter set to one value in the root, set to another value in one PDB, and set to yet another value in a second PDB.
The query in this section lists the initialization parameters that you can set independently in each PDB.
To list the initialization parameters that are modifiable in each container:
-
In SQL*Plus, access a container.
-
Run the following query:
SELECT NAME FROM V$SYSTEM_PARAMETER WHERE ISPDB_MODIFIABLE = 'TRUE' ORDER BY NAME;
If an initialization parameter listed by this query is not set independently for a PDB, then the PDB inherits the parameter value of the root.
Viewing the History of PDBs
The CDB_PDB_HISTORY
view shows the history of the PDBs in a CDB. It provides information about when and how each PDB was created and other information about each PDB's history.
To view the history of each PDB:
-
In SQL*Plus, ensure that the current container is the root.
-
Query
CDB_PDB_HISTORY
view.
Example 15-43 Viewing the History of PDBs
This example shows the following information about each PDB's history:
-
The
DB_NAME
field shows the CDB that contained the PDB. -
The
CON_ID
field shows the container ID of the PDB. -
The
PDB_NAME
field shows the name of the PDB in one of its incarnations. -
The
OPERATION
field shows the operation performed in the PDB's history. -
The
OP_TIMESTAMP
field shows the date on which the operation was performed. -
If the PDB was cloned in an operation, then the
CLONED_FROM_PDB
field shows the PDB from which the PDB was cloned.
COLUMN DB_NAME FORMAT A10 COLUMN CON_ID FORMAT 999 COLUMN PDB_NAME FORMAT A15 COLUMN OPERATION FORMAT A16 COLUMN OP_TIMESTAMP FORMAT A10 COLUMN CLONED_FROM_PDB_NAME FORMAT A15 SELECT DB_NAME, CON_ID, PDB_NAME, OPERATION, OP_TIMESTAMP, CLONED_FROM_PDB_NAME FROM CDB_PDB_HISTORY WHERE CON_ID > 2 ORDER BY CON_ID;
Sample output:
DB_NAME CON_ID PDB_NAME OPERATION OP_TIMESTA CLONED_FROM_PDB ---------- ------ --------------- ---------------- ---------- --------------- NEWCDB 3 HRPDB CREATE 10-APR-12 PDB$SEED NEWCDB 4 SALESPDB CREATE 17-APR-12 PDB$SEED NEWCDB 5 TESTPDB CLONE 30-APR-12 SALESPDB
Note:
When the current container is a PDB, the CDB_PDB_HISTORY
view shows the history of the current PDB only. A local user whose current container is a PDB can query the DBA_PDB_HISTORY
view and exclude the CON_ID
column from the query to view the history of the current PDB.
See Also: